Document
INALTo ICI302K 30cm Induction Cooktop User Guide

INALTo ICI302K 30cm Induction Cooktop User GuideINALTo ICI302K 30cm Induction Cooktop

FEATURES

2 Cooking Zones,
Knob & Touch Controls,
9 Power Levels,
Power Boost Function,
Child Lock,
99 Minute Auto-off Timer,
Toughened Ceramic Glass

Congratulations on your new InAlto 30cm Induction Cooktop!

YOUR INDUCTION COOKTOP

INALTo ICI302K 30cm Induction Cooktop - YOUR INDUCTION COOKTOP

Legend:

  1. Zone A: Max. 1800/2000 W zone
  2. Zone B: Max. 1800/2000 W zone
  3. Lock control
  4. Timer control
  5. ON/OFF power control
  6. Zone A: Power & Time control knob
  7. Zone B: Power & Time control knob

USING YOUR COOKTOP

To start cooking:

  • Touch the “ON/OFF” power control and all the displays will show “-” or “–“.
  • Make sure the bottom of the pan and the surface of the cooking zone are clean and dry. Then place a suitable pan on the cooking zone that you wish to use.
  • Rotate the heating zone selection control knob for your desired zone.
  • Adjust the temperature setting by turning the knob between 0­9. You can modify this temperature at any time during cooking.

To end cooking:

  • Turn the whole cooktop off by pressing the “ON/OFF” button.
  • Alternatively, adjust your desired zone temperature until the display shows “0” by rotating the knob anticlockwise. After a cooking zone is off, the relevant display will show “H” until the zone has cooled to a safe temperature.

Note: For further Operation Instructions refer to pages 10 ­ 12 of your user manual.

DETAILS

Dimensions (W, D, H mm): 288 × 520 × 59.5
Built-in Dimensions (W, D mm): 268 × 500
Warranty: 3 Years (2 + 1 on registration)

REGISTER YOUR APPLIANCE

AU: www.inalto.house/registration
NZ: www.inalto.house/nz/registration

SUPPORT

Telephone: 1300 11 4357
Email: [email protected]

MODEL /ICI302K.1
WWW.INALTO.HOUSE

Documents / Resources

INALTo ICI302K 30cm Induction Cooktop [pdf] User Guide
ICI302K, 30cm Induction Cooktop, ICI302K 30cm Induction Cooktop

Leave a comment

Your email address will not be published.