INALTO ICC905TB.1 90cm Ceramic Glass Electric Cooktop


Congratulations on your new InAlto 90cm Ceramic Cooktop!



  1. Max. 1800 W zone
  2. Max. 1200 W zone
  3. Max. 1100/ 2000 W zone
  4. Max. 1000/ 2200 W zone
  5. Max. 1200 W zone
  6. Glass plate
  7. Control panel


To start cooking: 

  • Touch the “ON/OFF” control and all the indicators will show “-”.
  • Make sure the bottom of the pan and the surface of the cooking zone are clean and dry. Then place a suitable pan on the cooking zone that you wish to use.
  • Touch the heating zone selection control for your desired zone. The indicator will flash.
  • Adjust the temperature by using the font slider control. The options range from 0–9. You can modify this temperature at any time during cooking.

To end cooking:  

  • Turn the whole cooktop off by pressing the “ON/OFF” button.
  • Alternatively, you can select your desired zone and use the slider controls to change the temperature of this zone to zero “0”. After a cooking zone is turned off, the corresponding indicator will show “H” until the zone has cooled to a safe temperature.

Note: For further operation instructions refer to pages 10–13 of your user manual.


Dimensions (W, D, H mm): 900 × 520 × 55 Built-in Dimensions (W, D mm): 875 × 495 Warranty: 3 Years (2 + 1 on registration)
Telephone: 1300 11 4357
Email: [email protected] 

Documents / Resources

INALTO ICC905TB.1 90cm Ceramic Glass Electric Cooktop [pdf] User Guide
ICC905TB.1, 90cm Ceramic Glass Electric Cooktop, Ceramic Cooktop, Electric Cooktop, ICC905TB.1, Cooktop

Leave a comment

Your email address will not be published. Required fields are marked *