INALTO ICC60T 60cm Ceramic Cooktop



  1. Max. 1200 W zone
  2. Max. 1800 W zone
  3. Max. 1200 W zone
  4. Max. 1800 W zone
  5. Glass plate
  6. ON / OFF
  7. Control panel


To start cooking:

  • Touch the “ON/OFF” control and all the indicators will show “-”.
  • Make sure the bottom of the pan and the surface of the cooking zone are clean and dry. Then place a suitable pan on the cooking zone that you wish to use.
  • Select a heat setting by touching the “-” or “+” button controls. The options range from 0–9. You can modify this temperature at any time during cooking.

To end cooking:

  • Turn a specific cooking zone off by scrolling down to “0” or touching the “-” and “+” controls at the same time.
  • Alternatively, turn the whole cooktop off by touching the ON/OFF control.
  • After a cooking zone is turned off, the corresponding indicator will show “H” until the zone has cooled to a safe temperature.
    Note: For further operation instructions refer to pages 10–12 of your user manual.


  • Dimensions (W, D, H mm): 590 × 520 × 55
  • Built-in Dimensions (W, D mm): 560 × 490
  • Warranty: 3 Years (2 + 1 on registration)


Telephone: 1300 11 4357
Email: [email protected]

Documents / Resources

INALTO ICC60T 60cm Ceramic Cooktop [pdf] User Guide
ICC60T, Ceramic Cooktop, Cooktop, Ceramic
INALTO ICC60T 60cm Ceramic Cooktop [pdf] User Manual
ICC60T, 60cm, Ceramic Cooktop, Cooktop


Leave a comment

Your email address will not be published.