QUICK START GUIDE
4 Cooking Zones, Side Knob Controls, 9 Power Levels, Residual Heat Indicators, Durable Ceramic Glass
Congratulations on your new InAlto 60cm Ceramic Cooktop!
- Zone A Max. 1200 W zone
- Zone B Max. 1800 W zone
- Zone C Max. 1200 W zone
- Zone D Max. 1800 W zone
- Glass plate
- Control Panel
USING YOUR COOKTOP
To start cooking
- Place a suitable pan on the cooking zone that you wish to use.
Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.
- Turn the knob control clockwise to set your desired cooking level from 1-9.
You can modify the heat setting at any time during cooking.
To finish cooking
- Turn the cooking zone off by turning the knob counter-clockwise to the “OFF” position. After a zone is switched off, the residual heat indicator of the corresponding zone will be lit. The residual heat also can be used as an energy-saving function if you want to heat further pans, use the hotplate that is still hot.
Note: For further operation instructions refer to pages 10–11 of your user manual.
Dimensions (W, D, H mm): 590 × 520 × 55
Built-in Dimensions (W, D mm): 560 × 490
Warranty: 3 Years (2 + 1 on registration)
Telephone: 1300 11 4357
Email: [email protected]
Documents / Resources
|INALTo ICC604K1 60cm Ceramic Cooktop [pdf] User Guide|
ICC604K1, 60cm Ceramic Cooktop, ICC604K1 60cm Ceramic Cooktop