Document

INALTo logo

QUICK START GUIDE
30cm Ceramic
CooktopINALTo ICC302K1 30cm Ceramic Cooktop

FEATURES

2 Cooking Zones, 9 Power Levels, Front Knob Controls, Residual Heat Indicators, Durable Ceramic Glass
Congratulations on your new InAlto 30cm Ceramic Cooktop!

YOUR COOKTOP

INALTo ICC302K1 30cm Ceramic Cooktop - fig

Legend

  1. Zone B Max. 1200 W zone
  2. Zone A Max. 1800 W zone
  3.  a Glass plate
  4. Knob Controls

GENERAL USE TIPS

  • Do not use cookware with jagged edges or a curved base.
  • Make sure that the base of your pan is smooth, sits flat against the glass, and is the same size as the cooking zone. Always centre your pan on the cooking zone.
  • Always lift pans off the ceramic cooktop – do not slide, or they may scratch the glass.

USING YOUR COOKTOP

To Start Cooking:

  1. Place a suitable pan on the cooking zone that you wish to use. Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.
  2. Use the knob control for your desired cooking zone and turn it to your required temperature. This can be adjusted at any time during cooking.

To Finish Cooking:

  1. Turn the knob control dial to the “OFF” position.
    When the glass plate is hot, the residual heat indicator will be lit. Don’t touch the glass plate until the indicator goes out. It can also be used as an energy-saving function if you want to heat further pans, use the hotplate that is still hot.

DETAILS

Dimensions (W, D, H mm): 288 × 520 × 55
Built-in Dimensions (W, D mm): 268 × 490
Warranty: 3 Years (2 + 1 on registration)

SUPPORT

Telephone: 1300 11 4357
Email: [email protected]

MODEL/ ICC302K.1
WWW.INALTO.HOUSE

Documents / Resources

INALTo ICC302K1 30cm Ceramic Cooktop [pdf] User Guide
ICC302K1, 30cm Ceramic Cooktop, ICC302K1 30cm Ceramic Cooktop

Leave a comment

Your email address will not be published.