I25D01 POS Device
“
Product Information
Specifications:
- Model: Swan 2 Pro (I25D01)
- Main LCD Display: 15.6 inches
- Vice LCD Display Options:
- 10.1 inches
- 15.6 inches
- Storage: TF Card Slot, External SD Card
- Connectivity: NFC, Wi-Fi, Bluetooth
- External Interfaces:
- RJ12 Port
- USB Ports
- Micro USB Port
- RJ45 Port
- HDMI Port
- Earphone Jack
- Operating Temperature: [Insert Operating Temperature]
- Storage Temperature: [Insert Storage Temperature]
- Operating Humidity: [Insert Operating Humidity]
- Altitude Limit: [Insert Altitude Limit]
Product Usage Instructions:
To operate the device using the power button:
- Start up: Short press the button when the machine is in
power-off mode. - Power off/restart: Long press the button for 2-3 seconds to
choose either option when the machine is in power-on mode. - Alternative power off: Press the button for 11 seconds when the
machine is in power-on mode.
Installation Steps:
To install and set up the device:
- Align the notches and fit the device into the base.
- Secure it with screws.
- Connect the power adapter.
- Turn on the power to start using the device.
FAQ (Frequently Asked Questions):
Q: How do I dispose of the battery?
A: The replaced/used battery should be disposed of according to
local environmental laws and guidelines. Do not dispose of it in
fire. It should be serviced or recycled by an authorized service
provider and must be disposed of separately from household
waste.
Q: What should I do if the product details in the manual do not
match the physical product?
A: Due to updates and enhancements, some details in the document
may be inconsistent with the physical product. Please consider the
product you received as the current standard. The interpretation of
this document belongs to the company, which reserves the right to
amend specifications without prior notice.
Q: What should I do if there is interference during
operation?
A: This device complies with FCC rules regarding interference.
If there is interference during operation, ensure that changes or
modifications are approved by the responsible party for compliance
to maintain the user’s authority to operate the equipment.
“`
Swan 2 Pro Model: I25D01
User Manual
This device has the following options:
15.6″ LCD
15.6″ LCD + 10.1″ LCD
15.6″ LCD + 15.6″LCD
Introduction
Power Button External Module
External Module LCD Display TF Card Slot Coverture
RJ12 Port USB Port
Micro USB Diagnostic
Serial Jack
DC-In Jack RJ45 Port USB Port HDMI USB Port Earphone Jack
LCD Display Provide touch screen for operator.
Power Button Start up: Short press on button when machine is in power off mode Power off/ restart: Long press on button 2-3 seconds to choose either option when machine is in power-on mode. Power off (alternative): Press button for 11 seconds when machine is in power-on mode.
Installation Step
Align the notche and fit the device into the base. Secure it with screws, connect the power adapter and turn on the power.
Technical Specifications
OS CPU Main LCD Display Vice LCD Display Storage NFC Wi-Fi Bluetooth Speaker
External Interface
External SD Card Power Adapter Operating Temperature Storage Temperature Operating Humidity Limit Altitude
iMin ROM base on Android 15(64 bit) Octa-core (Dual-core Cortex-A76 + Hexa-core Cortex-A55) 2.0GHz 15.6 inches, resolution: 1920 x 1080, multi-touch capacitive screen 10.1 inches, 1280 x 800 / 15.6 inches, 1920 x 1080 4GB RAM (optional 8GB) + 64GB ROM (optional 128GB) Yes 802.11 a/b/g/n/ac/ax 5.4BLE 1 x 1.5W 4 x USB Type-A 2.0, 1 x USB Type-A 3.0, 1 x USB Type-C, 1 x RJ45, 1 x RJ12, 1 x RJ11, 1 x Earphone, 1 x HDMI 2.0, 1 x DC-in MicroSD (TF) up to 1TB Output power 36W, Input: AC100~240V, Output: DC24V/1.5A -10 to +50 -20 to +60 5% to 95% r.H. Max.3500 meters
Safety Information
Safety and Handling
· Please plug-in power adapter to only its corresponding AC socket. · Do not use in explosive gas atmosphere. · Do not disassemble the equipment. It should be serviced or recycled only by an authorised service provider. · This is a Grade B product. The product may cause radio interference and interfere with medical devices. The user may be required to take practical measures to reduce the possibility of causing interference to radios, televisions and other electronic devices. · About the battery replacement: 1. Do not attempt to replace the battery yourself – you may
damage the battery, which could cause overheating, fire and injury. 2. The replaced/ used battery should be disposed according to local environmental laws and guidelines. Do not dispose in fire. It should be serviced or recycled by an authorised service provider, and must be recycled or disposed of separately from household waste.
Company Statement
Our company is not responsible for the following actions: · Damage caused by misuse, lack of care in maintaining the equipment, or placing the device under conditions that may cause undesired operation and risk as specified in this instruction manual. · We will not be responsible for any damage or problem caused by third party parts or components (other than the original products or approved products provided by us). Without our consent, you have no right to modify or alter the products. · The operating system of this product is supported by official regular OS update. If the user breached the third party’s ROM system or change the system file by hacking, it may cause unstable, undesired system operation and bring security risk.
Advices
· Do not expose the device to moisture, dampness, or wet weather, such as rain, snow or fog. · Do not use the device in extreme cold or hot environments eg, near a fire or lit cigarette. · Do not topple, throw, or bend. · Use in optimally clean and dust-free environment to avoid tiny particles clogging and seeping through gaps in the device. · Do not at tempt to use the device near medical equipment
Important Safety Information
· Do not install or use during thunder storms and lightning conditions, otherwise, there will be risk of electric shock, injury or death in the event of thunder or lightning hit. · If you find unusual odour, overheating or smoke, please cut off the power immediately. · Do not expose the device to moisture, dampness, or wet weather, such as rain, snow or fog; Do not use in explosive gas atmosphere.
Disclaimer
Due to regular updates and enhancements made to the product, some details of this document may be inconsistent with the physical product. Please take the product you received as current standard. The right to interpret this document belongs to our company. We reserve the right to amend this specification without prior notice.
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. ·Increase the separation between the equipment and receiver. ·Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ·Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Documents / Resources
 | Imin I25D01 POS Device [pdf] User Manual I25D01 POS Device, I25D01, POS Device, Device |