Assembly Instructions
US English Hosted copyBROR
BROR shelving unit, gray-green/pine plywood, 100x153/4x743/4" Browse 1 IKEA PDF for article 495.161.44.
Assembly instructions and product documents
Product information
Helpful product notes from available IKEA product data, shown after the instruction files so assembly documents stay first.
The shelf is perfect for heavy things since it can hold 95 kilos, which is twice as much load as a standard shelf.
10-year limited warranty. Read about the terms in the warranty brochure.
You can use the sturdy, durable shelf anywhere in the home ‒ in the garage, bathroom, kitchen and pantry ‒ since it withstands moisture, dirt and heavy loads.
The shelving unit and cabinet is durable, easy to clean and protected from rust, as it is made of powder-coated galvanized steel.
Perfect for big heavy items like tools and books.
You can easily expand your combination if you need more storage by adding on sections and shelves.
You can move the shelf and adapt spacing to suit your needs.
Only for indoor use.
If you combine two or more shelving units together, you should use the T-connector to make the combination more stable.
Wipe clean with a soft cloth dampened with water and a mild dish detergent or soap, if necessary.
Wipe dry with a clean cloth.
Stains can be removed by using an eraser or fine sandpaper.
Can be treated with oil, wax, lacquer or glazing paint for higher resistance and easy care.
The untreated wood becomes more durable and easier to clean if you oil or wax the surface.
This storage has been tested for public use and meet the requirements following standard: EN 16121.
WARNING! Tipping hazard – this product must be securely anchored. Use suitable screws and plugs for your home. If you are uncertain, seek professional advice.