BROR

BROR storage combo w/cabinets+workbench, black/pine plywood, 1337/8x153/4x751/4"

BROR storage combo w/cabinets+workbench, black/pine plywood, 1337/8x153/4x751/4" Browse 2 IKEA PDFs for article 494.368.83.

2 instruction files Article 494.368.83 Size 340 cm / 133 7/8 in

Assembly instructions and product documents

Available instruction files

Assembly Instructions

US English Hosted copy

Assembly instructions

Article 494.368.83

Open

Assembly Instructions

US English Hosted copy

Assembly instructions

Article 494.368.83

Open

Product details

Can be used in damp areas indoors.

Only for indoor use.

Possible to separate for recycling or energy recovery if available in your community.

Materials and care

Material

Top panel/ Side panel/ Door/ Bottom panel/ Frame: Galvanized steel, Epoxy/polyester powder coating
Back panel/ Shelf: Steel, Epoxy/polyester powder coating
Main parts: Galvanized steel, Epoxy/polyester powder coating
Table top: Pine plywood

Care

Wipe clean with a soft cloth dampened with water and a mild dish detergent or soap, if necessary.

For maximum quality, re-tighten the screws when necessary.

Safety and compliance

This storage unit has been developed and tested for office use and meets the requirements for durability and stability set forth in the following standards: EN 14073, EN14074, ANSI/BIFMA x5.9 and ISO-7170.

WARNING! Tipping hazard – this product must be securely anchored. Use suitable screws and plugs for your home. If you are uncertain, seek professional advice.