ÄNGSJÖN / BACKSJÖN

ÄNGSJÖN / BACKSJÖN Bathroom vanity with sink & faucet, high gloss white/white marble effect, 25x211/2x281/4"

ÄNGSJÖN / BACKSJÖN Bathroom vanity with sink & faucet, high gloss white/white marble effect, 25x211/2x281/4" Browse 10 IKEA PDFs for article 295.320.03.

10 instruction files Article 295.320.03 Size 63.5 x 535.9 x 5.1 x 713.7 x 10.2 cm / 25 x 211 x 2 x 281 x 4 in

Assembly instructions and product documents

Available instruction files

Assembly instructions preview

Assembly Instructions

US English Hosted copy

Assembly instructions

Article 295.320.03

Assembly instructions preview

Assembly Instructions

US English Hosted copy

Assembly instructions

Article 295.320.03

Assembly instructions preview

Assembly Instructions

US English Hosted copy

Assembly instructions

Article 295.320.03

Assembly instructions preview

Assembly Instructions

US English Hosted copy

Assembly instructions

Article 295.320.03

Assembly instructions preview

Assembly Instructions

US English Hosted copy

Assembly instructions

Article 295.320.03

BACKSJÖN Semi-recessed sink 905.499.57 preview

User Manual

US English Hosted copy

BACKSJÖN Semi-recessed sink 905.499.57

Article 295.320.03

BROGRUND Bath faucet 205.321.11 preview

User Manual

US English Hosted copy

BROGRUND Bath faucet 205.321.11

Article 295.320.03

BROGRUND Bath faucet 205.321.11 preview

User Manual

US English Hosted copy

BROGRUND Bath faucet 205.321.11

Article 295.320.03

TOLKEN Countertop 205.553.86 preview

User Manual

US English Hosted copy

TOLKEN Countertop 205.553.86

Article 295.320.03

User manual preview

User Manual

US English Hosted copy

User manual

Article 295.320.03

Product information

Details, materials and care

Helpful product notes from available IKEA product data, shown after the instruction files so assembly documents stay first.

Product details

Generous, full drawer storage capacity for all your essentials as piping is led through the back and not via a cut-out in the drawers. Drawers open all the way for a good overview.

The high gloss finish in white creates a sleek and contemporary expression emphasized with integrated handles for a refined look.

The sink is made of crushed marble which enables sharp, crisp edges with a scratch-resistant surface. This gives a clean and modern look.

This cabinet is to be wall-mounted. This creates a spacious feel but also makes it easier to clean floors underneath. It is also possible to add legs depending on the look you prefer.

To make it simpler for you, the countertop is available as pre-cut. You need to cut holes for wash-basin and mixer tap on your own.

Combine with other cabinets in the ÄNGSJÖN series to create a coordinated bathroom solution that fits your space and needs.

10-year Limited Warranty. Read about the terms in the Limited Warranty brochure.

Comprises: 1 washstand with drawers, 1 countertop, 1 semi-recessed sink, 1 water trap and 1 faucet.

If you are uncertain about the installation, contact a professional. The installation shall be made in accordance with valid local building and plumbing regulations.

Silicone is needed for installation, not included.

Materials and care

Material

Frame/ Bottom panel
Particleboard, Plastic foil (min. 50% recycled), Plastic foil, Plastic edging, Plastic edging
Top rail
Fiberboard, Plastic foil (min. 50% recycled), Plastic edging, Plastic edging
Middle rail/ Drawer divider/ Drawer sides/ Drawer back
Particleboard, Plastic foil, Plastic edging, Plastic edging
Drawer front
Fiberboard, Plastic foil (min. 50% recycled), Plastic foil, Plastic edging, Plastic edging
Drawer bottom
Fiberboard, Plastic foil, Plastic foil
Main parts
Polyester/crushed marble, Polyester
Cover/ Spring
Stainless steel
Cover cap/ Mechanism
Acetal plastic
Sealing ring
Synthetic rubber
Cover cap
Polycarbonate/ABS plastic
Body
Brass, Metallized
Spout
Brass, Brass, Metallized
Water trap frame/ Nut/ Outlet pipe
Polypropylene
Washer/ Seals
Synthetic rubber
Waste pipe
Synthetic rubber, Polypropylene
Strainer
Stainless steel
Assembly tool
ABS plastic

Care

Wipe clean with a mild soapy solution.

Wipe dry with a clean cloth.

Wet marks should always be dried off as soon as possible to stop moisture penetration.

Do not use scouring powder, steel wool, hard or sharp tools which can scratch the surface of the sink.

Safety and compliance

The sink should not come into contact with ammonia, acids, strong detergents, hair dye or chlorine.

This product bears the CE mark.

Must be secured to the wall for a safe installation. Different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your home, sold separately.

WARNING! Tipping hazard – this product must be securely anchored. Use suitable screws and plugs for your home. If you are uncertain, seek professional advice.