ÄNGSJÖN 305.353.31 Assembly Manual

Product details

Generous, full drawer storage capacity for all your essentials as piping is led through the back and not via a cut-out in the drawers. Drawers open all the way for a good overview.

The brown oak effect finish with a dark wooden look gives your space a warm and welcoming vibe. A contemporary expression with integrated handles that underline the minimalist look.

The deep bottom drawer has space for larger things like bottles and towels. The top drawer is ideal for organizing smaller items like brushes, creams, sprays and accessories.

Drawers with integrated dampers that catch the drawer and close it slowly, silently and softly.

The drawers are protected from water damage thanks to a smart production technique. Foil is wrapped vertically around the particleboard so there are no unprotected edges where water can penetrate.

This cabinet is to be wall-mounted. This creates a spacious feel but also makes it easier to clean floors underneath. It is also possible to add legs depending on the look you prefer.

The included suspension rail makes it easier to mount the cabinet on the wall. Secure the rail to the wall, then hang the cabinet on the rail and fasten.

Combine with other cabinets in the ÄNGSJÖN series to create a coordinated bathroom solution that fits your space and needs.

The unique wedge dowels make assembly easy and the fittings nearly invisible.

2 legs can be added. They screw on easily thanks to the insert nuts on the bottom of the cabinet. Sold separately.

10-year Limited Warranty. Read about the terms in the Limited Warranty brochure.

If you are uncertain about the installation, contact a professional. The installation shall be made in accordance with valid local building and plumbing regulations.

Suitable for both wall- and floor-mounted water outlet.

Comprises: 1 cabinet, 2 inner drawers, 2 drawer fronts and suspension rail.

May be completed with 2 ALMAÅN legs, sold separately.

Designer: Sarah Fager

Materials and care

Material

Frame/ Middle rail/ Bottom panel/ Drawer divider/ Drawer sides/ Drawer back: Particleboard, Plastic foil, Plastic edging, Plastic edging (min. 50% recycled)
Top rail: Fiberboard, Plastic foil, Plastic edging, Plastic edging (min. 50% recycled)
Drawer front: Particleboard, Fiberboard, Plastic foil, Plastic edging, Plastic edging (min. 50% recycled)
Drawer bottom: Fiberboard, Plastic foil

Care

Wipe dry with a clean cloth.

Wipe clean with a water dampened soft cloth and a mild non-abrasive dish detergent or soap, if necessary.

Safety and compliance

WARNING! Tipping hazard – this product must be securely anchored. Use suitable screws and plugs for your home. If you are uncertain, seek professional advice.

Must be secured to the wall for a safe installation. Different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your home, sold separately.

This cabinet needs to be attached to the wall even when using legs.