iHome logo2IHQI0850B0L2 Magnetic Wireless Charger
User Guide

iHome 2IHQI0850B0L2 Magnetic Wireless Charger

iHome 2IHQI0850B0L2 Magnetic Wireless Charger - 1

COMPATIBILITY: iPhone 12, iPhone 12 mini, iPhone 12 Pro, iPhone 12 Pro Max, and iPhone cases with MagSafe and other compatible wireless devices
INPUT: DC 5V-2A, DC 9V-2A OUTPUT: 5W,7.5W,10W
PACKAGE INCLUDES: WIRELESS CHARGER WITH SILICONE CABLE WRAP &USER MANUAL

NOTICE:

A. PLEASE USE QC 3.0 OR 18W USB-C™ PD COMPATIBLE POWER ADAPTER TO TAKE ADVANTAGE OF FAST CHARGING.
B. WHILE WIRELESS CHARGING OR FAST CHARGING, THE DEVICE, AND THE CHARGER MAY BECOME HOT. THIS DOES NOT AFFECT THE DEVICE’S LIFESPAN OR PERFORMANCE AND IS IN THE NORMAL RANGE OF OPERATION. IF THE BATTERY BECOMES TOO HOT, THE CHARGER MAY STOP CHARGING.

PRODUCT AND SAFETY INFO:

  1. DO NOT STORE OR USE IN HIGH TEMPERATURE, HUMIDITY, OR DIRTY AREAS.
  2. DO NOT STORE OR USE AROUND IN AREAS WITH STRONG MAGNETIC FIELDS
  3. KEEP OUT OF THE REACH OF CHILDREN.
  4. DO NOT EXPOSE TO WATER OR HEAVY DUST KEEP IT DRY CLEAN

iHome 2IHQI0850B0L2 Magnetic Wireless Charger - PRODUCT

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.
    Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to the radio which  can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of the device, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

Documents / Resources

iHome 2IHQI0850B0L2 Magnetic Wireless Charger [pdf] User Guide
2IHQI0850, WWE-2IHQI0850, WWE2IHQI0850, Magnetic Wireless Charger, 2IHQI0850B0L2 Magnetic Wireless Charger

Leave a comment

Your email address will not be published.