National standard power cable and power cord with grounding is suggested, so as to ensure stable power supply.
If projector is found defected, do not attempt to repair it by yourself. Please contact your distributor or factory directly.
Don’t look directly at the lens while projector is working.
This product can only be repaired by professional technical personnel.
No cloth, blanket or any other material, that could stock ventilation holes, should be placed around the projector while it is working.
Keep the projector away from water based products.
If the projector is not in use for a long time, turn it off and cut off the power supply.
Use factory original foam and other shockproof material for transport.

There could be a release of hot air from the vents as a normal phenomenon.
Consumers who use the power adapter to charge, should purchase a power adapter that is CCC-certified and meets the standard requirements.

Interface Functions:

Power supply

5V-2A Power supply
Use Power bank or cellphone power adapter outlet (5V 2A output) to connect with Micro USB (as Pic.1), switch on the power bank to make the projector enter into standby status.

Operation:

Button control
Long press power button(Pic 2) to turn on/off projector while the projector is in standby status.

Put the projector with lens vertical to the wall or screen. Turn on the projector and then adjust the focus until the picture is clear.

Select relevant icon to enter the submenu.

And press OK to display

Multimedia	Audio	MP3/APE/OGG/AAC/FLAC/ATRA
	Photo	JPEG/BMP/PNG/GIF
	Video	MKV/AVI/MOV/MP4/TS/ASF/FLV/PMP/MPG/VOB/WMV
	E-book	TXT

3. AV Input
Press “AV” button on the projector to display.

AV Connection

Yellow Y — Vedio Input
White W — Left Channel
Red R — Right Channel

4. Aux Connection
Connection 3.5mm aux port with outer audio as shown below.

This product is connected with the projector on the same screen. You only need to connect mobile data cable and operate step by step according to the pop-up prompt interface of the phone.

When iphone is connected with projector, the sound signal is transmitted to the product through the data cable and played through the built-in speaker of the device.
When android phone is connected to the projector, the audio signal of the program is played by the phone.
Due to differences in software and hardware systems of different video websites and different mobile phone models, the following phenomena may occur:
1) The sound signal is out of sync with the image.
2) The image is slow and the playback is not smooth. If this situation occurs, please change to other video websites, or re-connect the same screen with the appropriate mobile phone. Recommend video website: Tencent video.

Imported and Marketed By:
iGear Tech Pvt. Ltd.
204, Sai Corporate Park, Laxmi Nagar,
Off. Link Road, Goregaon West,
Mumbai – 400104.

Country Of Origin: PRC

Name of Commodity: ShowMax (iG-1125)

Month and Year of Import: April, 2020

Voltage: DC 5V 2A

Wattage: 5W

Warranty Period: 1 Year

Dimension: 85mmx95mmx38mm

Net Weight: 450 gms

Net Quantity: 1 Unit

In case of consumer complaints:
Toll free number – 1800 22 8495,
Email: sales@igear.asia
(Between 10am to 5pm, Mon- Fri)

iGear iG-1125 Show Max Mobile Mirroring Projector [pdf] Instruction Manual
iG-1125 Show Max Mobile Mirroring Projector, iG-1125, Show Max Mobile Mirroring Projector