telesystem logo

Yealink T46G High End Color Screen IP Phone

Yealink T46G High End Color Screen IP Phone

Atụmatụ dị nwere ike ịdị iche. Ntọala njirimara pụrụiche dabere na usoro izizi yana arịrịọ onye nchịkwa sistemụ maka ibuga ọ bụla. Biko kpọtụrụ onye nchịkwa sistemụ gị ma ọ bụ Telesystem ozugbo ka ị kparịta mgbakwunye ọ bụla na sistemụ ahụ.

Yealink T46G High End Color Screen IP Phone 1

Ntọala njikwa oku

Zaa oku
Lift the handset then begin speaking to the caller. Alternately, the Answer soft key, Speaker button, or Headset button may be pressed to answer an incoming call.
Tinye oku
Bulite ekwentị wee tinye akara ekwentị, ndọtị, ma ọ bụ koodu ịchọrọ ịkpọ. Pịa Zipụ ka ibido oku ma ọ bụ chere ka ọ gafee.
Kwụsị oku
Kwelite ekwentị ma ọ bụ pịa igodo dị nro nke ngwụcha oku.
ogbi
Pịa ogbi
bọtịnụ iji mebie ọdịyo gị mgbe ị na-akpọ. Pịa ọzọ ka ịchụpụ.

Ọkà okwu
Pịa bọtịnụ ọkà okwu ka ijiri ọnọdụ ọdịyo okwu.

ekweisi
Press the headset button to use headset mode audio (must have a headset attached).

Mpịakọta
Pịa bọtịnụ olu ka ịhazie olu maka ụda gị mgbe ọ na-adịghị arụ ọrụ ma ọ bụ ọnọdụ ọdịyo mgbe ị na-akpọ oku.

jide

Press the Hold button or soft key to place an active call on hold.

Ka ịmaliteghachi oku: 

  • When only one is on hold, press the button or Resume soft key.
  • When there is more than one on hold, use the and buttons to select the desired call then press or the Resume soft key.

Ijikwa oku dị elu

Nyefee kpuru (anaghị ekwupụta)
Nbufe kpuru ìsì na-agafe na ID onye na-akpọ oku sitere na onye nke atọ.

  • Press the Transfer soft key to place the first call on hold
  • Tinye ebe ndọtị ma ọ bụ akara ekwentị
  • Press the Transfer button or soft key to complete the transfer

Nyefee ozugbo na igbe ozi olu ime site na ịpị 7 gbakwunyere ndọtị dị ka nọmba ebe aga
Nyefe mara ọkwa 

  • Press the Transfer  button or soft key to place the first call on hold
  • Tinye ebe ndọtị ma ọ bụ akara ekwentị. Nọgide na ahịrị ka oku nke abụọ na-ejikọ.
    •  T o complete the transfer after speaking with the third party, hang up, press the Transfer button or Transfer soft key.
    • T o cancel the transfer and go back to the first party, press the Cancel or EndCall soft key. Your first call will still be on hold.

Oku ogbako (Uzo ato).

  • Press the Conference soft key to place first call on hold
  •  Tinye mgbakwunye ma ọ bụ akara ekwentị nke ndị ọzọ. Nọgide na ahịrị ka oku nke abụọ na-ejikọ.
  • Pịa igodo dị nro nke ọgbakọ iji jikọta oku a ọnụ.

Mgbe ị nọ na oku ọgbakọ, ị nwere ike ime ihe ndị a: 

  • Kpochapụ: nke a na-ewepụ gị na ogbako ma na-ebufe ndị ọzọ abụọ n'otu n'otu.
  • Jikwaa: Pịa igodo a dị nro iji wepụ mmadụ na ogbako ma ọ bụ mechie otu onye na ọgbakọ (a na-akpọ "Far Mute").
  • Kewaa: Pịa igodo a dị nro ka idowe oku abụọ ahụ na ekwentị gị iche.

Atụmatụ di elu

Redial
Press the Redial button to enter the Placed call list then use the and  buttons to select  the desired call. To place the selected call, either pick up the phone or press the Send soft key.

Ozi olu
To access voicemail, press the Message to messages, or change greetings. button. Follow the prompts to setup voicemail, listen.

Ọ bụrụ na a na-ezigara ozi na ekwentị, ọkụ echere ozi ga-amụba iji gosi na enwetara ozi ọhụrụ.

History
Press the History soft key to access a list of the most recent calls. Use the and button to navigate the lists of all, missed, placed, received, and forwarded calls.

Enyena nsogbu
Pịa igodo dị nro DND wee soro ihuenyo ihuenyo ka ịgbanwuo ma ọ bụ gbanyụọ nsogbu. Mgbe enyere ya aka, oku niile ozugbo na ndọtị gị ma ọ bụ akara ekwentị ga-aga ozugbo na igbe ozi olu gị. Ị nwere ike ịkpọ oku ọpụpụ na-emekarị.
Park
Park bụ njide 'kekọrịtara'. Enwere ike ịhụ ma nweta oku a dọbatara site na ekwentị desktọpụ niile na saịtị ahụ.

  • T opark a call, press one of the available Park keys. This transfers the call to that parking orbit and shows a lit light on the associated key.
  • Ka iweghachite oku adọwara, pịa bọtịnụ ogige kwesịrị ekwesị.

Page
Ọ bụrụ na agbanyere ya, njirimara ibe ahụ na-ebusa ozi a na-ekwu site na otu ekwentị, ekwentị niile, ma ọ bụ ngwa nbipụta n'elu.

Kpọgharị oku
Enwere ike ime mbugharị oku nke ahịrị / ndọtị gị site na ekwentị.

  • To turn forwarding on: Dial *72 followed by the extension or phone number to forward calls to. Pick up the phone to send the command.
  • To turn forwarding off: Dial *73 then pick up the phone to send the command.

Ngwa ekwentị CommPortal

Yealink T46G bụ ekwentị SIP nke na-ebuga ọtụtụ ọrụ ya site na ijikọ na interface CommPortal. Ihe interface a na-ebuga ọtụtụ ngwa ekwentị n'aka ndị debanyere aha ya:

  •  Kọntaktị netwọkụ (akwụkwọ ndekọ)
  •  Desking na-ekpo ọkụ (Ọpụpụ/Bata)*
  • Nkesa oku akpaaka (ACD)*

Ọ dị mkpa ịmara na iji ngwa ndị a chọrọ aha njirimara na paswọọdụ ziri ezi maka akaụntụ ekwentị gị. Enwere ike itinye nzere ndị a mgbe ị na-eji ngwa.
Aha njirimara na paswọọdụ bụ ndị a:

  • Aha njirimara: Nọmba ekwentị kpọkọtara ya na ekwentị gị
  • Password: current CommPortal (application) password Please contact your system administrator or Telesystem if you do not know your direct dial phone number or password.

Kọntaktị netwọkụ (akwụkwọ ndekọ)
Press the Directory soft key to access the phone directory. The Directory downloads all business group extensions, Multi Line Hunt Groups (MLHGs), and any CommPortal Contacts on your account.
Desking na-ekpo ọkụ (bọtịnụ pụọ)*
N'ọnọdụ ụfọdụ, ọ bụghị ndị ọrụ niile nọ n'ụlọ ọrụ n'otu oge, yabụ ndị ọrụ a nwere ike 'kekọrịta' ekwentị anụ ahụ, mana nke ọ bụla nwere nzere akaụntụ nke ọ bụla. A maara nke a dị ka Hot Desking. Hot Desking na-enye ndị ọrụ ohere ịbanye na ịpụ na ekwentị, si otú a na-ewere nzere ha na tebụl ọ bụla ha ga-arụ ọrụ n'ụbọchị ahụ. Biko mara, ọ dị mkpa ịbanye naanị n'otu ekwentị n'otu oge.

Ka ịpụ na ekwentị: 

  • Pịa igodo ọpụpụ.
  • Ihuenyo LCD ga-akpali gị ịdọ aka ná ntị, "Ị ji n'aka na ị chọrọ ịpụ?"
  • Pịa igodo nro OK ka ịpụ.
  • Ekwentị ga-amalitegharị wee gosi ihuenyo ewepụrụ. Enweghị ike ịkpọ oku ruo mgbe onye ọrụ abanye na ekwentị.

Ka ịbanye na ekwentị:

  •  Pịa igodo dị nro nbanye.
  • Tinye aha njirimara na paswọọdụ maka akaụntụ ahụ (lee ndetu gara aga)
  • Pịa igodo nro OK
  • Ekwentị ahụ na-amalitegharị ma na-emelite site na nhazi onye ọrụ wee banye

Nkesa oku akpaaka (ACD)*
Ọ bụrụ na ị bụ akụkụ nke Multi Line Hunt Groups eji maka ebe oku ma ọ bụ otu mgbanaka ndị ọzọ, onye na-ahụ maka sistemụ ekwentị gị nwere ike inye gị ikike ịbanye na pụọ ​​na otu ndị a site na iji bọtịnụ ACD.
Ịbanye ma ọ bụ pụọ na otu: 

  • Pịa bọtịnụ ACD.
  • A list of all hunt groups for which you are a member will appear. To the right of each, you will see whether you are Logged In or Logged Out. Select the group for which you want to change your status by using the and buttons.
  • Pịa igodo nbanye ma ọ bụ LogOut dị nro iji gbanwee ọkwa nbanye gị maka otu ahụ.

If you are a member of a true call center Multi Line Hunt Group (queue), your administrator may also ask that you manage your availability while you are logged in. This feature is called My State. To change your availability for all Multi Line Hunt Group calls:

  • Mgbe ịbanye n'ime opekata mpe otu ebe oku Multi Line Hunt Group, pịa igodo nro nke steeti m.
  • Jiri bọtịnụ na bọtịnụ gaa ọkwa nke ịchọrọ ịhọrọ, wee pịa bọtịnụ OK ka ịgbanwee gaa na ọkwa ahụ.
  • A ga-egosipụta ọkwa dị ugbu a na ihuenyo ekwentị. Ọkwa a na-emetụta naanị oku site na Multi Line Hunt Groups.

Remember to change your availability to Available before logging out of all hunt groups. The line keys indicate various ACD states as follows:

  • Wepụta
  • Banye, dị
  • Banye, Ọ dịghị
  • Kechie

* Please note that these advanced features may initially need to be set up by the Telesystem team. Please contact Telesystem for more details. 

Akwụkwọ / akụrụngwa

Yealink T46G High End Color Screen IP Phone [pdf] Ntuziaka onye ọrụ
T46G, T46S, T46U, High End Color Screen IP Phone, T46G High End Color Screen IP Phone

References

Hapụ ikwu

Na adreesị email gị agaghị bipụtara.