Recon Chat for PS4 Headset

TurtleBeach Recon Chat for PS4 Headset

Ntuziaka Ntuziaka

AKW PKWỌ OBODO

  1. Recon Chat Headband (A)
  2. Recon Chat Earcup with Microphone (B)

AKW PKWỌ OBODO

ASSEMBLE THE RECON CHAT

ASSEMBLE THE RECON CHAT

IN-LINE CONTROLS

IN-LINE CONTROLS

  1. Mgbanwe Ogbi Ogbi
    • Gbanweemute_button_black.png to mute the microphone.
  2. Nna-ukwu Volume
    • Adjust the master volume of the incoming chat audio.

Ntọala PS4

Ntọala PS4

  1. gaa Settings >> Devices >> Audio Devices.
      • Nịm ndenye & Mmepụta Devices na Headset Connected to Controller.
      • Nịm Mmepụta na ekweisi na Chat Audio.
      • Nịm Njikwa olu (ekwe ntị) level to Maximum.
  2. họrọ Adjust Microphone Level and follow the on-screen instructions to calibrate your microphone.

Xbox Otu AKWETKWỌ

Cheta na: The Recon Chat works with Xbox One Controllers with a 3.5mm headset jack. Other controllers require the Xbox One Headset Audio Controller.

1. Plug the headset into the Xbox controller.

Xbox Otu AKWETKWỌ

2. While in the Home screen, press the Xbox button on the controller. Scroll down to the buttons on the bottom of the left sidebar, and then select the Speaker icon (Audio).

3. Configure your settings as shown:

  • Nịm Olu ekweisi na Oke
  • Nịm Mic Monitor na gị gafeworo larịị

Olu ekweisi


Mbido Xbox

To set your Recon Chat For PS4 up for use with an Xbox console, please do the following. Please note this information applies to both the Xbox One and Xbox Series X|S consoles.

1. Plug the headset into the Xbox controller.

2. While in the Home screen, press the Xbox button on the controller. Scroll down to the buttons on the bottom of the left sidebar, and then select the Speaker icon (Audio).

Ihe njikwa Xbox

3. Configure your settings as shown*:

  • Nịm Olu ekweisi na Oke
  • Nịm Mic Monitor na gafeworo larịị

*The Headset Chat Mixer option will be greyed out; this headset will play chat audio only, so this setting is not needed for this particular headset.

hazi

WINDOWS SONIC SURROUND SOUND

1. While in the Home screen, press the Xbox button on the controller. You’ll see the following screen:

WINDOWS SONIC

2. Nanyagharịa ka ndị kwafile & System Tab, and select “Settings".

kwafile & System

3. gaa General >> Volume & Audio Output

Volume & Audio Output

4. Na Igweisi Audio column (right side of the screen), set Headset Format na Windows Sonic Maka Igweisi.

Igweisi Audio


Ntọala PlayStation

This article details the best way to set your Recon Chat for PS4 headset up for use with a PS4 or PS5 console.

Ntọala PS4

If you have a PS4/PS4 Pro console, please do the following.

Ntọala PS4

  1. gaa Settings >> Devices >> Audio Devices.
      • Nịm ndenye & Mmepụta Devices na Headset Connected to Controller.
      • Nịm Mmepụta na ekweisi na Chat Audio.
      • Nịm Njikwa olu (ekwe ntị) level to Maximum.
  2. họrọ Adjust Microphone Level and follow the on-screen instructions to calibrate your microphone.
Ntọala PS5

If you instead have a PS5 console, please do the following.

  1. Plug the headset into the aux port in the DualSense controller. Once you do this, the microphone function will automatically switch from the controller’s integrated mic to your headset.
  2. gaa Settings >> Sound >> Audio Output >> Output Device
      • họrọ Headset Connected To Controller n'ihi na Mmepụta Ngwaọrụ
      • Set Output to Headphones to Chat Audio
  3. gaa Settings >> Sound >> Volume >> Headphones
      • Nịm Volume Control (headphones) ọkwa ka Oke
  4. Adjust your microphone levels by going to Settings >> Sound >> Microphone >> Adjust Mic Level >> Microphone Level

Regulatory Compliance Statements for the EAR FORCE Reran Chat Model

Federal Communications Commission (FCC) Nkwado Nkwado

Class El Interference Statement

This equipment has been tested and found to comply with the Limits for a Class B digital device, pursuant to Part 15, Subpart B of the FCC Rules. These Limits are designed to provide reasonable protection against harmful interference M a residential installation. This equipment generates. uses. and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient ma ọ bụ bugharia ebe nnabata antenna ahụ.
  • Mee ka nkewa dị n'etiti akụrụngwa na onye nnata.
  • Jikọọ akụrụngwa n'ime ụzọ ntanetị dị iche na nke ejikọtara onye nata ya.
  • Gakwuru onye na-ere ahia ma ọ bụ onye ọkachamara redio / TV maka enyemaka.

FCC Kpachara anya.

Ngwaọrụ a na-akwado akụkụ 15 nke Iwu FCC. Arụ ọrụ dị n'okpuru ọnọdụ abụọ ndị a: 1. Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ, yana 2. Ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike ibute ọrụ na-achọghị.

Nkwupụta ICES Canada

Canadian Department of Communications Radio Interference Regulations This digital apparatus does not exceed the Class B limits for radio-noise emissions from a digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. This Class B digital apparatus complies with Canadian ICES-003. NMB-003 du Canada.

European Union and European Fair Trade Association (EFTA) Regulatory Compliance Declaration of Conformity Marking by this symbol:

CE indicates compliance with the Essential Requirements of the EMC Directive of the European Union 12014/30/EU). This equipment meets the following conformance standards:

Safety: EN 60950-1: 2006 +A11: 2009 + Al: 2010 +Al2: 2011 + A2: 2014 IT-Mark License), IEC 60950-1: 2005 (2nd Ed.) + Am 1: 2009 + Am 2: 2013 (CB Scheme Certificate), EN 50332-1: 2000, EN 50332-2: 2003, EN 71-3: 2013 ALso Licensed for Standards: UL 60950-1: 2007 R10.14, CAN/CSA-C22.2 No.60950-1-07 +41: 2011 + A2: 2014 Additional licenses issued for specific countries available on request

Umu anwuru: EN 55022: 2010 + AC: 2011, CISPR 22: 2008

ọgụ: EN 55024: 2010, CISPR 24: 2010, EN 61000-4-2: 2009, EN 61000-4-3: 2006 .A2: 2010, EN 61000-4-8: 2010

The products are Licensed, as required, for additional country specific standards for the International Marketplace. Additional issued licenses available upon request.

Gburugburu ebe obibi: Vol dị alatage Directive 2014/35/EU, RoHS 2011/65/EU. REACH 2006/1907/EC, WEEE 2012/19/EU. Packaging 94/62/EC. Toys Safety Directive 2009/48/EC

MwepuAkara a na ngwaahịa ma ọ bụ nkwakọ ngwaahịa ya na-egosi na ngwaahịa a agaghị ekpofu ya na mkpofu ụlọ gị ndị ọzọ. Kama, ọ bụ ọrụ gị itufu akụrụngwa mkpofu gị site na ịnyefe ya na ebe a họpụtara maka mkpogharị nke ihe eji eji eletriki na nke elektrọnik. Nchịkọta dị iche na imegharị ihe eji arụ ọrụ gị n'oge mkpofu ga-enyere aka ichekwa akụ ndị sitere n'okike wee hụ na emegharịrị ya n'ụzọ na-echekwa ahụike mmadụ na gburugburu ya. Maka ama ndị ọzọ gbasara ebe ị ga-atụfu ihe mkpofu gị maka imegharị, biko kpọtụrụ ndị nwe obodo, ma ọ bụ ebe ị zụrụ ngwaahịa gị.

Biko gaa leta ndị a URL maka otu akwụkwọ zuru oke nke Nkwupụta nke nkwekọrịta:

http://www.turtlebeach.com/homologation  
This product is compliant with the Consumer Product Safety Improvement Act of 2008. Public Law 110-314 (CPSIA)


Budata site na ntaneetị

TurtleBeach Recon Chat for PS4 Headset Instruction Guide – [ download PDF ]


 

Hapụ ikwu

Na adreesị email gị agaghị bipụtara.