Akwụkwọ ntuziaka Tranya S2 Smart Watch

Tranya S2 Smart Watch

malitere

Ndekọ ngwugwu

Replace The Band

1. Side button: Power on/off; Back to the last interface
2. Side button: Power on; Switch to training interface

Ọ bụrụ na ịzụtara band ọhụrụ ma chọọ ịnọchi, nke mbụ, tụgharịa mgbanaka wee wepụ eriri nkwojiaka, wee bulie bandị ahụ nke masịrị gị, tụgharịa ngbanwe ahụ na njedebe nke elekere ruo mgbe ị nụrụ pịa wee bata n'ime ebe. .
Cheta na: Pay attention to the position of the long and short band and the display screen, do not install them upside down.

Jụọ Watch gị

• Jikọọ eriri USB na elekere na elekere dịka foto a si dị.
• Mgbe ejikọrọ ngwaọrụ ahụ na ọkụ ọkụ, ọ ga-ama jijiji.

Ekike

Yi ngwaọrụ ahụ na mkpịsị aka dị anya site na ọkpụkpụ nkwojiaka ma mezie njigide nke eriri nkwojiaka ka ọ bụrụ ọnọdụ dị mma.

Ike Onwu / Gbanyụọ

1. Ogologo oge pịa bọtịnụ dị n'elu aka nri maka 4-5 sekọnd iji gbanye. Ma ọ bụ gbanye ya ka ọ gbanye ọkụ.
2. Gbanye na Gbanyụọ interface, wee pịa ya ka gbanyụọ. Ma ọ bụ pịa bọtịnụ dị n'elu aka nri maka 4-5 sekọnd na isi interface ka gbanyụọ.

Wụnye App

1. Open your App store and search “GloryFit” to install.
2. Or scan the following QR codes to install “GloryFit”. The QR code can be found in the Setting.
   

Device requirement iOS 9.0 And Above, Android 4.4 Above to support Bluetooth 4.0..

Personal Information and exercise goals

1. Mepee ngwa GloryFit ka ịtọọ ozi nkeonwe gị.
2. Setting your avatar, name, gender, age. height and weight, which can help to increase the accuracy of the monitoring data.
3. Tọọ ebumnuche mmega ahụ gị kwa ụbọchị.

Ngwaọrụ njikọ

Before connecting, ensure the following matters.

1. Ejikọghị elekere ahụ ozugbo na Bluetooth nke ekwentị mkpanaaka. Ọ bụrụ otu a, biko hichapụ “S2” na ndetu ekwentị mkpanaka Bluetooth.
2. The watch is not connected to other mobile phones. If so, please unbind the watch from other mobile phones. If the original phone is an iOS system, you also need to delete the “S2” from the Bluetooth List of the phone).
3.  Ebe dị n'etiti ekwentị mkpanaaka na elekere kwesịrị ịbụ ihe na-erughị 1m.

Then follow the below steps to connect your smart watch

Kwụpụ 1: Turn on the Bluetooth in your phone:
Kwụpụ 2: Open the “GloryFit in your phone;
Kwụpụ 3: Click “Device”; Step 4: Click “Add a new device”;
Kwụpụ 5: Pịa "Họrọ ngwaọrụ";
Kwụpụ 6: Select the product model – S2
Kwụpụ 7: Click “Pair to complete the connection
Cheta na: If you can’t find “S2 in steps, please check whether the device has been selected in the Bluetooth list of your mobile phone. If so please click “Ignore S2′ and search again.

ọrụ

1. Welie aka gị ma ọ bụ bọtịnụ dị n'elu aka nri ka ọkụ na ihuenyo.
2. The screen will turn off without operations in 10 seconds by default. You can modify this default value in the smart watch.
3. Ọrụ nlekota ọ̀tụ̀tụ̀ obi agbanyere na ndabara. Ị nwere ike gbanyụọ ya na GloryFit.
4. Akwụsịghị ọrụ oxygen ọbara na ndabara. Ị nwere ike ịgbanwuo ya na GloryFit.
5. Pịa bọtịnụ dị n'elu aka nri n'oge ọ bụla ka ịlaghachi azụ.

Mmekọrịta data

Elekere ahụ nwere ike chekwaa ụbọchị 7 nke data adịghị n'ịntanetị, ma ị nwere ike iji aka mekọrịta data na ibe ngwa ngwa. Ka data na-abawanye, oge mmekọrịta ga-adị ogologo, yana oge kacha ogologo bụ ihe dịka nkeji 2.

Ọrụ na ntọala GloryFit App

Akwụkwọ edemede

1. Ncheta oku
   Ị nwere ike otu-pịa akara ngosi pink iji kwụdo oku a.
2. Ihe ncheta SMS
3. Ihe ncheta ngwa
   You can add reminders of App messages in the GloryFit, such as Twitter, Facebook, WhatsApp. Instagram na ozi ngwa ndị ọzọ.
   

Cheta na:

1. Be sure to turn on both of the functions and their permissions in the GloryFit
2. The watch only can display 80 characters for IOS and Android per message.
3. Ọ bụrụ na elekere gị enwetaghị ozi ọ bụla, biko rụtụ aka na FAQ na njedebe nke akwụkwọ ntuziaka.
   

Ahụ ike anụ ahụ

1. Nleba anya obi
   Ọrụ nlekota ọ̀tụ̀tụ̀ obi agbanyere na ndabara. Ị nwere ike gbanyụọ ya na GloryFit.
   
2. Ntọala oxygen ọbara
   The blood oxygen function is off by default. You can turn it on in the GloryFit. You can set the time and period of blood oxygen monitoring according to your needs. 1-H is the recommended cycle for blood oxygen monitoring.
   Cheta na: A ga-akwụsịtụ nlekota ọnụọgụ obi mgbe ị na-elele oxygen ọbara, na ọzọ.
3. Ncheta izu ike
   Ị nwere ike ịtọ oge mmalite, oge ngwụcha na oge ncheta nke ihe ncheta dị ka mkpa gị siri dị.
   
4. okirikiri physiological
   Ọrụ nwanyị dị naanị mgbe ịmechara usoro ndị a na GloryFit.
   Usoro usoro ahụ ike-Mejupụta ozi oge gị-Malite
   

Ọrụ General

Cheta na: For the following operations, the word expressions of iOS and Android systems will be a little different.

1. Ralse hand to activate display
   The function raise hand to activate display is on by default. You can turn it off in the GloryFit. You can also set the time for the bright screen to 5s/10/15s on the smart watch,
   Menu-Settings-Screen time.
   
2. Echegbula
   You can set the start and end time of “Do not disturb mode according to your needs.
   Cheta na: When you turn on the “Do not disturb” mode, the “raise hand to activate display” and message notification function are unavailable.
   
3. Usoro oge
   android: Ngwaọrụ - Ntọala zuru ụwa ọnụ - Usoro oge - Họrọ usoro awa 12 ma ọ bụ usoro awa 24
   IOS Device-More settings24-Hours Time on/off)
   
4. unit
   android Device – Universal settings-Unit-Select Metric system or British system
   na kwafile-Setting Unit
   
5. Temperature unit conversions *C/°F
   Kwụpụ 1: Click the weather icon in the upper left corner of the “Home interface: Step 2: Choose C/°F which is in the upper right corner of the weather interface.

Ọzọ

1. Ihe ncheta mmezu nke nzọụkwụ
   You can set a target step number in the GloryFit. When you reach this target, the smart watch will shake three times to remind you that you have completed the goal,
2. Firmware kwalite
   Ọ bụrụ na a kpaliri gị ịkwalite ngwanro, biko kwalite ya n'oge.
   Cheta na: Biko chajịa elekere nke ọma tupu imelite ya. Ọ bụrụ na batrị erughị 30%, nkwalite ahụ nwere ike ịda.

Isi igodo

The home screen is the clock

1. Swipe down to see the quick settings, such as Do Not Disturb. Brightness, Find the Phone Setting.
2. Swipe up to see the notifications,
3. Swipe right to see the menu on your watch
4. Swipe left to see the shortcut interfaces, such as Status, Heart rate, Sleep, Weather
5. Press the button on the upper right to return.

Ọrụ isi peeji

• Weather and temperature
• Kalori
• Day,Date -Time
• Steps – Distance Sleep time
• Oku obi
• Oke batrị

Gbanwee ihu elekere

1. Jiri ogologo oge pịa isi interface maka 4-5 sekọnd ka ịgbanwee.
2. Or (Setting -Dial) to switch.
   Cheta na: Ị nwekwara ike họrọ ihu ndị ọzọ na Dash Board of GloryFit.

Onodu interface

Switch to the Status interface to check the steps, distances and calories. The distances and calories are calculated based on the current walking steps, the height and weight set in the App individually.

Ọzụzụ interface

Gbanwee na interface ọzụzụ, pịa ihuenyo ka ịbanye na interface ọzụzụ akọwapụtara. Pịa bọtịnụ dị n'elu aka nri ka kwụsịtụ, ị nwere ike họrọ ma ịga n'ihu ma ọ bụ pụọ.

Heart Interface

Gbanwee na interface obi, pịa ihuenyo ka view data ọnụọgụ obi.

Cheta na:

1. Enyere nlebanya ọnụọgụ obi site na ndabara. Ọ bụrụ na ịchọghị ọrụ a, ịnwere ike gbanyụọ ya na ngwa “GloryFit.
2. If the heart rate monitoring function is on the green light on the back of the watch will keep flashing.
3. If you find that the heart rate data is inaccurate, please pay attention to the following matters: 111 Wear the watch with moderate tightness, and the sensor behind the watch should be close to the skin 21 Switch to the corresponding sports mode when exercising: (31 If it is still inaccurate, please reboot the watch.

Ọbara oxygen interface

Gbanwee na interface oxygen ọbara wee tụọ ọkwa oxygen gị n'oge ọ bụla.

Cheta na:

1. Heart rate monitoring will be suspended when monitoring blood Oxygen, and vice versa.
2. Iji mee ka data oxygen dị n'ọbara bụrụ nke ziri ezi, biko hụ na ihe ndị a n'oge nlele:
   1. Ambient temperature is above 25*C, 12)
   2. Keep your wrists fiat on the table without moving.

interface ọnụego iku ume

Banye na interface respiration ume ma nwalee ọnụego iku ume gị n'oge ọ bụla.

Breathing training Interface

Gbanwee na interface ọzụzụ iku ume ma mee ọzụzụ iku ume dịka ntụziaka nke elekere si dị. Ị nwere ike ịhazigharị oge ọzụzụ na ọsọ dịka mkpa gị si dị.

Pressure Interface

Gbanwee na interface nrụgide na ọ na-ewe naanị nkeji atọ iji nyochaa nrụgide gị.

Egwu interface

Ị nwere ike ịkpọ, kwụsịtụ ma ọ bụ gbanwee egwu na-akpọ na ekwentị gị.

interface ụra

Switch to the Sleeping interface and check the sleep status, Sleep data is mainly based on heart rate and wrist movement range. When you are asleep, the heart rate will decrease significantly
Cheta na:

1. Falling asleep between 6 a.m. and 6 pm is not recorded.
2. Mgbe ị na-edina n'àkwà ma jiri ekwentị gị na-egwuri egwu ruo ogologo oge, ọnụọgụ obi gị na mmegharị aka gị yiri ọnọdụ ụra. Elekere nwere ike ikpebi na ị na-ehi ụra.

Weather Interface

Banye na interface ihu igwe, ị nwere ike view ihu igwe na okpomọkụ.
Cheta na: Weather function is only available after you turn on the “Location of the mobile phone.

Ozi interface

Na ozi interface, pịa isi ihuenyo ka view the message, slide the screen to turn the pages, Press the button on the upper right to exit.

Cheta na: Message remind is just a function to remind you to receive the message. Its display interface will have character restrictions 80 characters for iOS and Android per message.

Ahụ ike nwanyị interface
Through the App you can record your personal menstrual cycle and predict the safety period, pregnancy and ovulation period, which can help women.

Ọzọ

• Oge elekere.
  Gbanwee na interface Stopwatch, pịa ka ịbanye n'usoro oge.
• Nkeji oge:
  Switch to the Timer interface, and click to choose the time you page. When the time is up, the watch will vibrate.
• Chọta m:
  Switch to the Find me interface and touch the icon, then the phone will ring,
• Mpụpụ:
  Gbanwee na nhụta ọkụ ọkụ, wee pịa ihuenyo ka ịgbanwuo ọkụ.

Settings

App Download: Scan the Qr code to install the app “Gloryfit”.

anya

1. Biko zere mmetụta siri ike, oke okpomọkụ na ikpughe na elekere.
2. Biko ewepụla, rụkwaa ma ọ bụ gbanwee ngwaọrụ n'onwe ya.
3. Ojiji nke gburugburu ebe obibi bụ ogo 0 -45, ma amachibidoro ịtụba ya n'ime ọkụ ka ọ ghara ime ka mgbawa.
4. Biko jiri akwa dị nro kpochapụ mmiri ahụ wee nwee ike iji elekere ahụ maka ọrụ ịchaji, ma ọ bụghị ya, ọ ga-eme ka corrosion nke ebe kọntaktị cha cha na ihe nchaji nwere ike ime.
5. Emetụla kemịkal ndị ahụ aka dịka mmanụ, mmanụ dị ọcha, propanol, mmanya na-egbu egbu ma ọ bụ ọgwụ ahụhụ.
6. Please do not use this product in high pressure and high magnetic environment
7. If you have sensitive skin or tighten the wristband, you may feel discomfort able.
8. Biko kpoo ọsụsọ na-atasị na nkwojiaka n'oge. Eriri nwere ogologo kọntaktị na ncha, ọsụsọ, ihe nfụkasị ma ọ bụ ihe mmetọ, nke nwere ike ibute nfụkasị anụ ahụ.
9. it is often used, it is recommended to clean the wristband every week. Wipe with wet cloth and remove oil or dust with mild soap. It is not
   appropriate to wear a hot bath with a wristband. After swimming, please wipe the wristband in time so as to keep dry.

Ntọala nhazi

FAQ

Ajụjụ: Kedu ihe m ga-eme mgbe enweghị ike ijikọ elekere m na ekwentị?
A: Please follow the instructions:

1. Install the “GloryFit App in Google Play or App store and allow all authorizations required by GloryFit.
2. Make sure both of your watch and mobile phone Bluetooth are turned on. And it would be better that the distance between the mobile phone and the watch is less than 1m.
3. If the watch is not connected to the mobile phone through the GloryFit App, but directly through the Bluetooth search, please delete the watch “S2” from the Bluetooth list of your mobile phone.
4. It you want to connect to another new phone, please unbind the watch on the original phone through the GloryFit App first lf the original phone is an 105 system, you also need to delete the watch S2 from the Bluetooth list of the phone).

Ajụjụ: Gịnị kpatara na elekere enweghị ike ịnata ozi SMS / ngwa?
A: Please follow the instructions:

1. Make sure that you have authorized the SMS/Apo notification for the Gloryfit App
2. Gbaa mbọ hụ na ejikọrọ elekere na ekwentị mkpanaaka site na ngwa GloryFit.
3. Make sure “Do not disturb mode on the watch is turned off,
4. Ensure that the SMS reminder and App reminder of the GloryFit App are turn on.
5. Gbaa mbọ hụ na ngwa GloryFit gị na-agba ọsọ n'azụ.
   Cheta na: Some Android phones automatically close Apso running in the background every 10-15 minutes. If GlaryFit App is stopped by the system, the watch will not receive any information notification. You can keep the GloryFit App running in the background through “Setting in your phone. If you don’t know how to set it, you can search your mobile phone brand how to keep the App running in the background? on Google.

Q: Why is the time and weather on the watch incorrect?
A: The time and weather of the watch are synchronized with your smart phone.

1. Biko hụ na ejikọrọ elekere gị na ekwentị gị site na ngwa GloryFit, ma mee ka GloryFit na-agba ọsọ.
2. At the same time, the “Location of your mobile phone is turned on.

Q. Is the sleep data accurate?
A- Sleep data is accurate, Sleep data is mainly based on heart rate and wrist movement range. When you are asleep, the heart rate will decrease significantly. When you are lying in bed and playing with your phone for a long time, and your heart rate and wrist movements are similar to the state of sleep, the watch may determine that you are asleep. However, the third-generation algorithm of our watch has fixed this problem. Note: Falling asleep between 6 am, and 6 p.m. is not recorded.

Ajụjụ: Kedu ka m ga-esi mee ka ọnụọgụ obi m dịkwuo mma?
A: (1) Wearing the watch with moderate tightness, and the sensor behind the watch should be close to the skin. 12) Switch to the corresponding sports mode when exercising.

Q: Is the watch waterprool?
A: It supports 3ATM waterproof and dust-proof level 3ATM standard is 30 meters below waterl. Usually, you can wash your hands with the smart watch. Note: But be sure not to enter the steam room with your watch. Such as sauna, hot spring, hot bath, etc.

Maka ozi ọzọ, biko gaa na: tranya.com
Maka enyemaka ọ bụla, zitere anyị email: nkwado@tranya.com

Emebere na china
FC CE ROHS

EU REP SkyLimit Service GmbH Rowdingsmarki 20 20457 Hamburg
UK AR HUA TENG LIMITED 3 Glass Street, Hanley Stoke On Trent ST12ET United Kingdom

Rụpụta:

aha: Huizhou Xiansheng Technology Co., LTD
Okwu: 3rd Floor, Workshop No. 2. Yunhao High-tech Park, Yuhe Road, Sanhe Town, Hulyang Economic Development Zone, Huizhou, China

Nkwupụta FCC

ACC
Interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IHE: A nwalewo akụrụngwa a wee hụ na agbasoro njedebe maka ngwaọrụ dijitalụ Class B, dabere na Nkebi nke 15 nke Iwu FCC. Emere oke a iji nye nchebe ezi uche dị na ya megide nnyonye anya na-emerụ ahụ na nrụnye obibi. Ngwaọrụ a na - ewepụta, ojiji ma nwekwa ike igbanwe ike ikuku redio, ma ọ bụrụ na etinyeghị ya ma jikwaa ya na ntuziaka ndị ahụ, nwere ike ibute ndabichi na-emerụ ahụ na nkwukọrịta redio. Agbanyeghị, enweghị nkwa na nnyonye anya agaghị eme na otu nrụnye. Ọ bụrụ na akụrụngwa a na - ebute nnyonye anya na redio ma ọ bụ nnabata telivishọn, enwere ike kpebisie ike site na ịgbanwu akụrụngwa ahụ, gbanye onye ọrụ ka ọ gbalịa idozi nnyonye anya ahụ site na otu ma ọ bụ karịa n'ime usoro ndị a:

• Reorient ma ọ bụ bugharia ebe nnabata antenna ahụ.
• Mee ka nkewa dị n'etiti akụrụngwa na onye nnata.
• Jikọọ akụrụngwa n'ime ụzọ ntanetị dị iche na nke ejikọtara onye nata ya.
• Gakwuru onye na-ere ahia ma ọ bụ onye ọkachamara redio / TV maka enyemaka.

Ngwaọrụ a na poolu ya agaghị ejikọ ma ọ bụ rụọ ọrụ yana ihe ọ bụla na mpi ma ọ bụ transmitter ọzọ.

Nkwupụta Ngosipụta Mgbasaozi
Enyochala ngwaọrụ ahụ ka o wee mezuo ihe ngosi RF n'ozuzu ya na ọnọdụ mkpagharị mkpagharị na -enweghị mgbochi.

Nkwupụta agbagha
Ngwaọrụ a nwere transmitter (s) / ndị na-anabata ihe nke enweghị ikike nke na-agbaso RSS (s) Innovation, Science and Economic Development Canada. Ọrụ arụ ọrụ n'okpuru ọnọdụ abụọ a:

1. Ngwaọrụ a nwere ike ọ gaghị ebute ndabichi.
2. Ngwaọrụ a ga-anabata nnyonye anya ọ bụla, gụnyere nnyonye anya nke nwere ike ibute ọrụ nke ngwaọrụ ahụ adịghị mma.

Ngwaọrụ a na -eme ka nnwere onwe pụọ na oke nyocha oge niile na ngalaba 2.5 nke RSS 102 yana nnabata RSS RSS 102, ndị ọrụ nwere ike nweta ozi Canada na mkpughe na nnabata RF.

Akụrụngwa a na-akwado oke mkpughe radieshon Canada nke edobere maka gburugburu ebe anaghị achịkwa ya.
Atụlela ngwaọrụ a ka o gboo mkpa mkpughe RF izugbe. Ekwesịrị ịwụnye ma rụọkwa ngwa a n'ogo kacha nta 0mm n'etiti radiator & ahụ gị.

Akwụkwọ / akụrụngwa

Tranya S2 Smart Watch [pdf] Akwụkwọ ntuziaka onye ọrụ S2, 2A4AX-S2, 2A4AXS2, Smart Watch, S2 Smart Watch