SEALEY-akara ngosi

SEALEY ATD25301 AUTO RETRACTABLE RATCHET TIE DOWN

SEALEY-ATD25301-AUTO-RETRACTABLE-RATCHET-TIE-DOWN-PRODUCT

Daalụ maka ịzụrụ ngwaahịa Sealey. Emepụtara ya n'ọkwa dị elu, ngwaahịa a, ọ bụrụ na ejiri ya dịka ntuziaka ndị a siri dị, ma debe ya nke ọma, ga-enye gị ọtụtụ afọ nke enweghị nsogbu.

DỊ mKPA: Biko jiri nlezianya gụọ ntuziaka ndị a. Rụba ama chọrọ, ịdọ aka ná ntị na ịdọ aka ná ntị. Jiri ngwaahịa a nke ọma yana lezie anya maka ebumnuche ọ bu n'obi mee ya. Ọdịda ime otú ahụ nwere ike ịkpata mmebi na/ma ọ bụ mmerụ ahụ nke onwe ma ga-emebi akwụkwọ ikike ahụ. Debe ntuziaka ndị a ka ọ dị mma maka iji ọdịnihu.SEALEY-ATD25301-AUTO-RETRACTABLE-RATCHET-TIE-DOWN-fig-1

NCHEKWA

  • N'ịhọrọ na iji web ịhịa aka n'ahụ, a ga-echebara ikike nkedo achọrọ, na-echebara ọnọdụ ahụ echiche
    of use and the nature of the load to be secured. The size, shape and weight of the load, together with the intended method of use, transport environment and the nature of the load will affect the correct selection.
  • For stability reasons, free-standing units of load have to be secured with a minimum of one pair of web ịhịa aka n'ahụ maka ịhịa aka n'ahụ na ụzọ abụọ web ịhịa aka n'ahụ maka nhịahụ diagonal.
  • Ndi ahọrọ web ịhịa aka n'ahụ ga-adị ike nke ọma yana ogologo ogologo maka ụdị ojiji. Iwu ntucha ndị bụ isi:
    • Plan the fitting and removal operations of lashing before starting a journey;
    • Buru n'uche na n'oge njem, akụkụ nke ibu nwere ike ibutu;
    • Calculate the number of web Ịta ụta dị ka EN 12195-1.
    • Only those web A ga-eji nhịhịa emebere maka ịkụ ọkpọ na STF na labelụ maka ịkụ ọkpọ;
    • Check the tension force periodically, especially shortly after starting the journey.
  • N'ihi omume dị iche iche na elongation n'okpuru ibu ọnọdụ, dị iche iche n'ịkụ n'ahụ akụrụngwa (eg Lashing yinye na web ịhịa aka n'ahụ) agaghị eji akwa otu ibu ahụ. A ga-atụlekwa maka ngwa mgbakwunye (ihe ndị ọzọ) na ngwaọrụ ịhịa aka n'ahụ na mgbakọ ihe mgbochi ibu dakọtara na web ịhịa aka n'ahụ.
  • N'oge a na-eji nko dị larịị ga-etinye aka na obosara zuru oke nke elu nke nko ahụ.
  • Ntọhapụ nke web ịhịa aka n'ahụ: Ekwesịrị ilebara anya iji hụ na nkwụsi ike nke ibu ahụ na-adabere na ngwa ịkụ ọkpọ yana na ntọhapụ nke web lashing shall not cause the load to fall off the vehicle, thus endangering the personnel. If necessary attach lifting equipment for further transport to the load before releasing the tensioning device in order to prevent accidental falling and/or tilting of the load. This applies as well when using tensioning devices that allow controlled removal.
  • Tupu ị na-agbalị ibutu otu unit nke ibu ya web A ga-ahapụ ịhịa aka n'ahụ ka ọ nwee ike ibuli ya n'efu site na ikpo okwu ibu.
  • During loading and unloading attention has to be paid to the proximity of any low overhead power lines.
  • Ihe si na ya web lashings are manufactured have a selective resistance to chemical attack. Seek the advice of the manufacturer or supplier if exposure to chemicals is anticipated. It should be noted that the effects of chemicals may increase with rising temperature. The resistance of man-made fibers to chemicals is summarized below.
  • Polyamides anaghị egbochi mmetụta alkalis. Otú ọ dị, mineral acids na-awakpo ha.
  • Polyester na-eguzogide ọgwụ ịnweta acid mana alkalis na-awakpo ya.
  • Polypropylene is little affected by acids and alkalis and is suitable for applications where high resistance to chemicals (other than certain organic solvents) is required.
  • Ngwọta nke acid ma ọ bụ alkalis na-adịghị emerụ ahụ nwere ike itinye uche nke ọma site na evaporation iji kpata mmebi. Were emeru ihe webBings na-akwụsị ọrụ ozugbo, gbanye ha nke ọma na mmiri oyi, wee kpọọ nkụ.
  • Web Lashings na-agbaso akụkụ nke EN 12195 dabara adaba maka ojiji na oke okpomọkụ ndị a:
    • 40 °C to +80 °C for polypropylene (PP);
    • 40 °C to +100 °C for polyamide (PA);
    • 40 °C to +120 °C for polyester (PES).
  • Ogo ndị a nwere ike ịdị iche na gburugburu kemịkalụ. N'ọnọdụ ahụ, a ga-achọ ndụmọdụ nke onye nrụpụta ma ọ bụ onye na-ebubata ya.
  • Ịgbanwe okpomọkụ gburugburu ebe obibi n'oge njem nwere ike imetụta ike ndị dị na web lashing. Check the tension force after entering warm areas.
  • Web A ga-ajụ ma ọ bụ nyeghachi onye nrụpụta maka nrụzi ma ọ bụrụ na ha gosipụtara akara ọ bụla mebiri emebi.
  • A na-ewere njirisi ndị a dị ka akara mmebi:
    • naanị web A ga-arụzi akara nrịbama na-ebu akara;
    • Ọ bụrụ na enwere kọntaktị na mberede na ngwaahịa kemịkal, a web A ga-ewepụ ịhịa aka n'ahụ na ọrụ ma a ga-akpọtụrụ onye nrụpụta ma ọ bụ onye na-eweta ngwaahịa;
    • n'ihi na web lashings (to be rejected): tears, cuts, nicks and breaks in load-bearing fibers and retaining stitches; deformations resulting from exposure to heat;
    • for end fittings and tensioning devices: deformations, splits, pronounced signs of wear, signs of corrosion.
  • Ekwesịrị ịkpachara anya na web adịghị emebi ịkụ ọkpọ site na akụkụ dị nkọ nke ibu a na-eji ya. A na-atụ aro nlele anya tupu na mgbe ojiji ọ bụla gasịrị.
  • Only legibly marked and labeled web a ga-eji ịhịa aka mee ihe.
  • Web lashings shall not be overloaded: Only the maximum hand force of 500 N (50 daN on the label; 1 daN = 1 kg) shall be applied. Mechanical aids such as levers, bars etc. as extensions are not to be used unless they are part of the tensioning device.
  • Web Agaghị eji nhịahụ eme ihe mgbe a kekọtara ọnụ ma ọ bụ gbagọrọ agbagọ.
  • A ga-egbochi mmebi nke akara aha site na idobe ha n'akụkụ dị nkọ nke ibu na, ọ bụrụ na ọ ga-ekwe omume, na ibu ahụ.
  • The webA ga-echebe bing pụọ na esemokwu, abrasion na mmebi site na ibu nwere akụkụ dị nkọ site na iji mkpuchi mkpuchi na/ma ọ bụ ihe nchebe nkuku.

OKWU

Emepụtara site na polyester webbing nwere nkwado agbụ gburugburu nko. Weghachite onwe ya na ịpị bọtịnụ na-eweghachite ihe ahụ webbing, na-ahapụ unit ahụ ka ọ dị mma ma dị mma. Mfe drum na usoro ratchet na-eme ka esemokwu ahụ webbing iji nye njide ibu dị elu. Kwesịrị ekwesị maka ịchekwa ibu na tapaulins n'elu akwa akwa ma ọ bụ ụgbọala na-adọkpụ. Aka na usoro ntọhapụ bụ roba mkpuchi maka agbakwunyere nkasi obi.

nkọwapụta

Model Ee e Na -agbaji nko Maximum Tension WebOgologo ogologo Webbing Width ibu
ATD25301 600 kg S-.dị 300 kg 3 m 25 mm 1
ATD50301 1500 kg S-.dị 750 kg 3 m 50 mm 1

Ọrụ

IHE: If unsure of requirements for specific application of Tie Down, seek professional advice.

  1. INSTALLING THE STRAP
    1. Depress the Release tab (fig.1) and draw out as much strap length as required.
    2. Locate strap hooks to desired fixing points and, using the ratchet lever (fig.1), tighten the strap to the required tension. RELEASING THE STRAP
    3. Depress the Release tab (fig.1) and allow the strap to lengthen sufficiently enough to enable the strap hooks to be removed from their fixing points.
    4. Once disconnected, depress the Release tab to allow the strap to fully withdraw into the ratchet housing.
      IHE: For additional information see the Sealey YouTube channel. SEALEY-ATD25301-AUTO-RETRACTABLE-RATCHET-TIE-DOWN-fig-2

EGO

  1. After use, thoroughly wipe down the strap and the ratchet body using a soft, clean and dry cloth.
  2. Chekwaa unit ahụ na ebe dị ọcha, kpọrọ nkụ.

IHE OMUME EGO

Megharịa ihe ndị a na-achọghị kama ịtụfu ha ka ihe mkpofu. Ngwa niile, ngwa na nkwakọ ngwaahịa kwesịrị ịhazi, buru ya na ebe a na-emegharị ihe ma tụfuo ya n'ụzọ dabara na gburugburu ebe obibi. Mgbe ngwaahịa ahụ ghọrọ enweghị ọrụ kpamkpam ma chọọ mkpofu, kpochapu mmiri ọ bụla (ọ bụrụ na ọdabara) n'ime akpa akwadoro ma tụfuo ngwaahịa na mmiri mmiri dịka iwu mpaghara siri dị.
Cheta na: Ọ bụ amụma anyị na -akwalite ngwaahịa mgbe niile yana dị ka nke a anyị nwere ikike ịgbanwe data, nkọwapụta na akụkụ akụrụngwa na -enweghị ọkwa ọ bụla.
mkpa: A gaghị anabata ụgwọ ọ bụla maka iji ngwaahịa a ezighi ezi.

Akwụkwọ ikike

Nkwa ahụ bụ ọnwa 12 site na ụbọchị ịzụrụ, ihe akaebe nke achọrọ maka nkwupụta ọ bụla.

Okwu:

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 [email protected] www.sealey.co.uk

Akwụkwọ / akụrụngwa

SEALEY ATD25301 AUTO RETRACTABLE RATCHET TIE DOWN [pdf] Ntuziaka onye ọrụ
ATD25301, ATD50301, RATCHET, RATCHET Nweghachi

Hapụ ikwu

Na adreesị email gị agaghị bipụtara.