VFD-750C-230 750W AC Ntinye Mgbanwe Mbanye Module na Ọrụ PFC
“
Nkọwapụta ngwaahịa
| Ụdị No. | VFD-750C-230 |
|---|---|
| PWM mmepụta | (Ntụbaaka nke 1,2,3,4) |
| Ntinye Voltage nso (UVW) | 380Vmax, ahịrị-na-akara voltage 0 ~ 268V nwere ike ịgbanwe na modulated PWM, dabara maka moto klas 3PH 200-240V |
| Enyere ike | 350W |
| Ịrụ ọrụ | DC ụgbọ ala VOLTAGE PWM Ugboro ugboro akwadoro ntinye MpịakọtaTAGE: 2.5KHz ~ 15 KHz, 90 ~ 264VAC |
Ntuziaka ojiji ngwaahịa
1. Nwụnye
Soro usoro ndị a ka ịwụnye VFD-750C-230:
- Gbaa mbọ hụ na a na-eme njikọ eletrik kwesịrị ekwesị dịka nke
kpọmkwem voltage oke. - Wụnye modul ahụ nke ọma na ebe kwesịrị ekwesị.
2. Ọrụ
Iji rụọ ọrụ VFD-750C-230:
- Tinye ike n'ime voltage oke.
- Jikwaa modul ahụ site na iji mgbama PWM enyere.
3. Nchekwa nchekwa
Maka ojiji ngwaahịa a na-echekwaghị:
- Zere ikpughe modul na mmiri ma ọ bụ oke
okpomọkụ. - Ejila modul ahụ rụọ ọrụ karịrị ike akwadoro na ugbu a
oke.
Ajụjụ A na-ajụkarị (FAQ)
Ajụjụ: Gịnị bụ kacha inrush ugbu a maka
VFD-750C-230?
A: Kacha inrush ugbu a maka mmalite oyi bụ 50A na
230VAC.
Q: Olee otú m nwere ike ijikwa VFD-750C-230?
A: Enwere ike ịchịkwa modul ahụ site na iji akara PWM 3-phase dị ka
akọwapụtara na ntuziaka.
"'
VFD-750C-230 750W AC Ntinye Mgbanwe Mbanye Module na Ọrụ PFC
Akwụkwọ ntuziaka onye ọrụ
Vidiyo
IEC 61800-5-1
Bauar t gepruft Sicherheit
egelma ge od os be wac g
www.tuv.com ID 2000000000
BS EN/EN61800-5-1
TPTC004
~
https://www.meanwell.com/serviceGTIN.aspx
File Name:VFD-750C-230-SPEC 2024-11-22
VFD-750C-230 750W AC Ntinye Mgbanwe Mbanye Module na Ọrụ PFC
Nkọwapụta
Ụdị NO. Mpụta PWM
(Ntụbaaka nke 1,2,3,4)
Ntinye
Njikwa / ỌRỤ
(Ntụbaaka nke 5)
Gburugburu ebe nchekwa
Nchekwa & EMC
NDỊ ỌZỌ MỤRỤ
VFD-750C-230
VOLTAGE RANGE(UVW)
380Vmax, ahịrị-na-akara voltage 0 ~ 268V nwere ike ịgbanwe ya na PWM gbanwetụrụ, dabara maka moto klas 3PH 200-240V
UGBUA
Ogo kacha elu
3A 6A maka 5 sekọnd
EGO IKE
350W
Ịrụ Ọrụ DC BUS VOLTAGE
93% 380±5VDC
PWM KWESỊRỊ KWESỊRỊ NTỤTA MpịakọtaTAGE
2.5 KHz ~ 15 KHz 90 ~ 264VAC
OGWU NKWUKWU NKWUKWU (Hz) 47 ~ 63Hz
IHE MGBE IKE (Ụdị)
PF> 0.99/115VAC, PF>0.93/230VAC na ibu zuru oke
EKWERE EKWESỊRỊ ỤBỤRỤ ỤBỤRỤ
8A / 115VAC 4A/230VAC
INI IGBO
Mmalite oyi 50A / 230VAC
Njikwa PWM PHASE 3 dị ugbu a
<2mA/240VAC PWM akara mgbaama na-akwọ ụgbọala ọnụ ụzọ ámá maka IGBT. (CN93, PIN8 ~ 13) 3.3V TTL/CMOS ntinye: Elu (> 2.7V): IGBT NA; Ala (<0.4V): Gbanyụọ IGBT
3-PHASE ugbu a sensọ DC ụgbọ ala VOLTAGSENSOR
Ndị na-emegide shunt dị ala 100m wuru na usoro UVW (CN93, PIN4 ~ 6)
DC BUS voltage mmetụta mmetụta (CN93, PIN1) 2.5V@DC BUS 380V
SENSOR THERMAL
NTC 10K arụnyere maka ịchọpụta IGBT na-arụ ọrụ okpomọkụ. (TSM2A103F34D1R (Electric na-eche echiche), PIN3 nke CN93)
IKE inyeaka akara ezighi ezi
Mgbama mmejọ inverter (Obere sekit/OCP, CN93, PIN7).
3.3V TTL/CMOS mmepụta: Nkịtị: Elu (> 3V); Ihe na-adịghị mma: ala (<0.5V) Ike mmepụta 15V na-abụghị nke dịpụrụ adịpụ maka ụlọ njikwa mpụga (CN93, PIN 14 ka PIN2) 15V@0.1A; Ntachi obi +/- 0.5V, Ripple 1Vp-p max
OGE NA-arụ ọrụ okirikiri.
Ụdị nchekwa : Gbanyụọ o/p voltage, gbanyeghachi ike iji nwetaghachi -30 ~ +60 (tụ aka na "Dreating Curve")
ỌRỤ ỤMỌDỤ NA-arụ ọrụ TEMP., IHU URU
20 ~ 90% RH na-abụghị condensing -40 ~ +85, 10 ~ 95% RH na-abụghị condensing.
VIBRATION
10 ~ 500Hz, 2G 10min./1 okirikiri, oge maka 60min. nke ọ bụla tinyere X, Y, Z axe
Ọkọlọtọ nchekwa
CB IEC61800-5-1,TUV/BS EN/EN61800-5-1,EAC TP TC004 kwadoro
NA -ECHE VOLTAGE
I/P-FG:2KVAC
Nguzogide dịpụrụ adịpụ
I/P-FG:100M Ohms/500VDC/25/70%RH
Oke
Ọkọlọtọ
Ọkwa ule / ndetu
EMC EMISỌ
Emere Radiated Harmonic Ugbu a Voltage Flicker
EN / EN 61800-3 EN / EN 61800-3 EN / EN 61000-3-2
Klas A, C2 Klas A, C2 Klas A —–
BS EN/EN IEC61800-3, gburugburu nke abụọ
EMC MGBE
Oke ESD Radiated EFT/Burest Surge Emere Ubi Igwe Ọdụdọ
Ọkọlọtọ EN 61000-4-2 BS EN 61000-4-3 BS EN EN 61000-4-4 BS EN
Ule ule / ọkwa ọkwa 3, 8KV ikuku; Ọkwa 2, 4KV kọntaktị Ọkwa 3 Ọkwa 3 Ọkwa 3, 2KV/Akara-Ụwa; Ọkwa 3, 1KV/Line-Line Ọkwa 3 Ọkwa 4
Voltage Dips na nkwụsị BS EN/EN IEC61000-4-11
> 95% mikpuo oge 0.5, 30% mikpuo 25 oge,> 95% nkwụsị 250 oge
MTBF
Voltage deviation
IEC 61000-2-4 Klas 2
± 10% Un
Mgbagwoju anya Harmonic (THD) iwu nkwekọ n'otu n'otu
IEC 61000-2-4 Klas 3 IEC 61000-4-13 Klas 3
THD 12%
Ọdịiche ugboro ugboro
IEC 61000-2-4
±4%
Ọnụego mgbanwe ugboro ugboro
IEC 61000-2-4
2%/s
2863.4K elekere min. Telcordia SR-332 (Bellcore); elekere 310.5K min.MIL-HDBK-217F (25)
Akụkụ (L*W*H)
150*100*41mm
Mbukota
0.8Kg; 30pcs/25kg/1.64CUFT
File Name:VFD-750C-230-SPEC 2024-11-22
VFD-750C-230 750W AC Ntinye Mgbanwe Mbanye Module na Ọrụ PFC
Ihe Ngosi
Ụlọ ọrụ ACL ACN FG
Nzacha EMI
PFC CIRCUIT
380VDCBus
UH
VH WH GATE DRIVE CONTROL UL
VL WL FAULT ITRIP
IKE MGBE
MKPỌRCUIT echebe
HV+ HV-
Ọnọdụ okpomọkụ IGBT
ihe mmetụta
V/I CURVE
Io
6A
Ọnụ ugbu a
U
(5 sk.)
V
3.24A
W
3A
1.62A
Mpaghara S1 na-aga n'ihu
RSH_U RSH_V RSH_W PWM_UH PWM_UL PWM_VH PWM_VL PWM_WH PWM_WL FAULT HV+ sensọ
HV-
Vaux_15V
RTH
150V
268V
Vo
Ogologo oge
Mmepụta Derating VS Input Voltage
Ibu (%)
100
80
Nduzi obi jụrụ
or
Ikuku mmanye
50
40
Convection jụrụ
30
20
-30
0
10
20
30
40
50
60 70 (HORIZONTAL)
Okpomọkụ ikuku
Ibu (%)
100
90
80
70
60
Ya na 23.5CFM Fan
50 40
90 95 115 120 130 140 160 180 200 220 240 264
Ntinye VOLTAGE (VAC) 60Hz
Ọnụ ugbu a
200%
80% 5 sekọnd.
55 sk.
OKWU (%)
Ịrụ ọrụ vs Ibu
100% 95% 90% 85% 80% 75% 70% 65%
30% 40% 50% 60% 70% 80% 90% 100%
115VAC 230VAC
Ibu
File Name:VFD-750C-230-SPEC 2024-11-22
VFD-750C-230 750W AC Ntinye Mgbanwe Mbanye Module na Ọrụ PFC
Akwụkwọ ntuziaka ọrụ
1. 3-phase PWM Control (CN93, PIN8 ~ 13) VFD-750C-230 na-enye sekit mgbanaka isii site na iji 3 ọkara akwa IGBT. PWM_UH/UL na-achịkwa IGBT nke usoro ọ bụla, PWM_VH/VL na PWM_WH/WL (PIN 8 ~ 13). Ihe ntinye chọrọ maka PWM dakọtara na akara TTL na CMOS 3.3V. Biko rụtụ aka na eserese dị n'okpuru.
PIN 13 PWM_UL PIN 12 PWM_UH PIN 11 PWM_VL PIN 10 PWM_VH PIN 9 PWM_WL PIN 8 PWM_WH
Kaadị MCU nke mpụga
PWM
MCU
ỊDỌ AKA NA NTỊ: Ọ dị mkpa idobe oge opekempe n'etiti mgba ọkụ elu na nke ala nke usoro ọ bụla.
t anwụ
t anwụ
tdead (Nkeji)
300ns
PWMxH
PWMxL
t sw
Mmepụta Voltage
VX
380V 0V
tdead : Ịgbanwe oge nwụrụ anwụ t sw : Oge mgbanwe
x = U, V, W
2. 3-phase Nchọpụta ugbu a & Nchekwa gafere ugbu a (CN93, PIN4 ~ 6)
A na-etinye ihe mgbochi shunt dị ala 100m n'akụkụ ọ bụla nke VFD-750C-230 maka nha ugbu a na nchọpụta mkpirisi okirikiri. A na-atụ aro ka iwelata ogologo sekit nchọpụta mpụga wee jiri OPA chọpụta mgbaàmà. Biko rụtụ aka na eserese dị n'okpuru.
PIN 6 RSH_W PIN 5 RSH_V PIN 4 RSH_U PIN 2 HV-
Voff set
Kaadị MCU nke mpụga
x3
+ OPA
–
IU ADC MCU
Ọ bụrụ na mmepụta nke ugbu a karịrị 200% nke uru akwadoro, sekit nchebe ime ga-akpalite ma mechie onye ọkwọ ụgbọ ala maka nchekwa.
Ọnụ ụzọ ámá - ụgbọala
ITRIP
Voc U
COMP
Voc V Voc W
Mkpirisi okirikiri
Iu
Nchedo
Iv
Iw
File Name:VFD-750C-230-SPEC 2024-11-22
VFD-750C-230 750W AC Ntinye Mgbanwe Mbanye Module na Ọrụ PFC
3. DC BUS Voltage Detection (CN93, PIN1) VFD-750C-230 na-eji ụgbọ ala DC arụ ọrụtagihe mmetụta (HV+ sensọ, PIN 1). Ihe mmetụta na-enye mmepụta 2.5V mgbe ụgbọ ala DC voltage bụ 380V. A na-atụ aro ka ịchọpụta mgbaàmà sitere na OPA. Mgbe voltage nke ụgbọ ala DC gafere 420V, mgbama ntinye PWM ga-emechirịrị maka nchekwa.
Kaadị MCU nke mpụga
PIN1 HV+ ihe mmetụta
+ OPA
–
Ọnụ ego nke ADC MCU
Real DC Bus volta ge(V)
Nhazi maka ụgbọ ala DC voltage ngụkọta oge: VDC BUS = 380 x HV+ sensọ
2.5
Nkọwapụta ihe mmetụta HV+ 600 400 200
0
0.00
1.00
2.00
3.00
4.00
HV+ ihe mmetụta mmetụta voltage (V)
4. Nchọpụta okpomọkụ IGBT (CN93, PIN3)
VFD-750C-230 arụnyere n'ime ihe mmetụta okpomọkụ maka ịchọpụta okpomọkụ modul ike. Ndị ọrụ nwere ike ịchọpụta okpomọkụ modul ike maka nchekwa. Sekit nchọpụta akwadoro dị n'okpuru. A na-atụ aro ka mechie ntinye PWM, ma ọ bụrụ na pin 3 voltage gafere 3.3V.
PIN 3 RTH
Vtemp
Kaadị MCU MCU dị na mpụga MCU
PIN 2 HV-
5. Mgbama mmejọ
Ọ bụrụ na VFD-750C-23 na-ezute ọnọdụ nfebigara ókè ma nọgide na steeti ahụ maka oge kacha nta, a ga-eme ka mgbaàmà FAULT rụọ ọrụ (ọrụ dị ala) iji gwa onye na-ahụ maka mpụga ma ọ bụ sekit.
Mpụta ugbu a
t Tripmin.
200% kwadoro ugbu a
tTripmin.
1m
PIN7 EZIOKWU
t Tripmin.
5m
Min. n'elu-ugbu a tripping oge
6. Ntụnye breeki (CN100, PIN1,3)
VFD-750C-230 echekwara CN100 PIN1,3 nke jikọtara na HV +, HV- maka imewe sekit breeki. Nke kachasị voltage na DC Bus (HV+) agaghị adị elu karịa 420V.
Kaadị MCU nke mpụga
CN93 PIN1 HV+ ihe mmetụta TB100 PIN3 HV-
TB100 PIN1 HV+
Vref COMP Ọnụ ụzọ ámá
HV+ ihe mgbochi breeki
HV-
File Name:VFD-750C-230-SPEC 2024-11-22
VFD-750C-230 750W AC Ntinye Mgbanwe Mbanye Module na Ọrụ PFC
Nkọwapụta igwe
(Nkebi: mm, ndidi ± 1mm)
150
143
3.5
8
6 7.62
3 2 1 TB1
TB100 5 4 3 2 1
4-4.2 L=6
7.62
6
84
100
1
13
CN93
2
14
1
13
2
14
41
Ntinye ntinye AC Pin NO. Ihe omume (TB1)
Ngwunye Mba. Ọrụ
1
AC/L
2
AC/N
3
Ngwunye ihe nrụpụta NO. Ihe omume (TB100)
Ngwunye Mba. Ọrụ Pin Nkenye
1
W
4
HV-
2
V
5
HV+
3
U
A na-eji TB100 Pin4, Pin5 maka ịwụnye ngwaọrụ breeki na-emegharị, na-ezere mmebi VFD-750C-230.
Njikwa Pin NO. Ihe omume (CN93): HRS DF11-14DP-2DS ma ọ bụ otu
Ngwunye Mba. Ọrụ Pin Nkenye
1
HV + ihe mmetụta
8
PWM_W H
2
HV-
9
PWM_W L
3
RTH
10
PWM_V H
4
RSH _U
11
PWM_V L
5
RSH _V
12
PWM_U H
6
RSH _W
13
PWM_U L
7
EZIOKWU
14
Vaux_15V
Ebe obibi: HRS DF11-14DS ma ọ bụ dakọtara ọnụ HRS DF11-** SC ma ọ bụ ihe dakọtara
File Name:VFD-750C-230-SPEC 2024-11-22
VFD-750C-230 750W AC Ntinye Mgbanwe Mbanye Module na Ọrụ PFC
Ọrụ Ntụtụ njikwa(CN93):
Ntụtụ No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Nkọwa ọrụ
HV+ ihe mmetụta DC BUS voltage sensọ mmepụta, na-ezo aka pin 2(HV-)
HV- DC BUS voltage sensọ mmepụta ala
Ihe mmetụta okpomọkụ RTH
RSH_U RSH_V RSH_W FAULT
Mpụta ihe mmetụta ihe dị ugbu a nke oge V nke ugbu a mmepụta ihe mmetụta ihe mmetụta ugbu a karịa nchọpụta ugbu a. Nkịtị> 3V, adịghị mma <0.5V
PWM_WH PWM_WL PWM_VH PWM_VL PWM_UH PWM_UL Vaux_15V
W oge ntinye mgbagha akụkụ dị elu, na> 2.7V; gbanyụọ <0.4VW nkeji ntinye mgbagha dị ala, na> 2.7V; gbanyụọ <0.4VV oge ntinye mgbagha akụkụ dị elu, na> 2.7V; gbanyụọ <0.4VV nkeji ntinye mgbagha dị ala, na> 2.7V; gbanyụọ <0.4VU oge ntinye mgbagha akụkụ dị elu, na> 2.7V; gbanyụọ <0.4VU nkeji ntinye mgbagha dị ala, na> 2.7V; gbanyụọ <0.4V inyeaka voltage mmepụta 15V zoro aka na pin2 (HV-). Oke kachasị ugbu a bụ 0.1A
Ngwa
Ngwa example: BLDC mbanye ngwa
Ntinye AC
Ụlọ ọrụ ACL ACN FG
VFD-750C-230
UVW
PWM_UH PWM_UL PWM_VH PWM_VL PWM_WH PWM_WL
Vaux_15V
EZIOKWU
RTH
RSH_U
RSH_V
380VDC
Ihe mmetụta RSHW HV+
HV+ HV-HV-
(TB100)(TB100)
moto BLDC
Ibu igwe
Osisi
Ihe mmetụta ọnọdụ nzuzo / mmetụta Ụlọ Nzukọ
bọọdụ njikwa BLDC nke onye ọrụ
Ngwa breeki onye ọrụ
Njikwa breeki
1. Ọnụ ọgụgụ ahụ na-egosi usoro mbanye BLDC setịpụrụ na VFD-750C-230. 2.Developers nwere ike ijikwa akara PWM nke 6-switch site na iji SPWM ma ọ bụ SVPWM, wdg maka 3-phase vol.tage modulation, ma wulite usoro njikwa usoro ntọala
na ihe mmetụta shunt dị ugbu a na mgba ọkụ akụkụ ala 3-phase (RSH_U/V/W) yana DC BUS vol.tage sensọ (HV+ sensọ) nke VFD-750C-230 nyere. 3.Developers nwere ike họrọ ihe kwesịrị ekwesị ọnọdụ BLDC sensọ dị ka encoder ma ọ bụ Hall-mmetụta mmetụta dabara ngwa ha. 4.Ọ na-atụ aro ka ịwụnye sekit breeki / ngwaọrụ na HV +/HV- pin( DC BUS, CN100) iji zere DC BUS OVP mgbe BLDC na-decelerating. 5.A na-atụ aro ka mechie ntinye PWM ma ọ bụ jikọọ na ngwaọrụ mgbochi breeki maka nchekwa mgbe DC Bus vol.tage dị elu karịa 420V. 6.Ọ bụrụ na etinyere VFD-750C-230 na njikwa na-ekwesịghị ekwesị, dị ka ngwa ngwa ngwa ngwa ma ọ bụ njikwa ugbu a dị njọ, ọ nwere ike kpalite VFD-750C-230.
nsogbu-steeti mechie mmepụta voltage (ọkwa dị ala na pin FAULT).
File Name:VFD-750C-230-SPEC 2024-11-22
VFD-750C-230 750W ụdị izugbe mgbanwe ugboro ugboro nwere ọrụ PFC
Nwụnye
1.Operate na mgbakwunye aluminom ọzọ iji zute "Derating Curve" na "Static Characteristics", usoro VFD ga-etinyerịrị n'elu efere aluminom (ma ọ bụ kabinet nke otu nha) na ala. Ọnụ ọgụgụ a tụrụ aro E gosipụtara efere aluminom dị ka n'okpuru. Na maka ịkwalite arụmọrụ ọkụ, efere aluminom ga-enwerịrị nke ọma ma dịkwa mma (ma ọ bụ kpuchie ya na griiz thermal), na usoro VFD ga-agbanyerịrị n'etiti etiti aluminom.
M4*4
450
450
2.Na 23.5CFM mmanye ikuku
23.5CFM
MMA
Ntụgharị ikuku
75mm
100mm
3
File Name:VFD-750C-230-SPEC 2024-11-22
VFD-750C-230 750W AC Ntinye Mgbanwe Mbanye Module na Ọrụ PFC
Ndepụta Ngwa
Ọ bụrụ na ị nwere ikike njikwa ọ bụla nke ngwa akọwapụtara, biko kpọtụrụ MEAN WELL maka nkọwa ndị ọzọ. Ekwesịrị inye iwu bọọdụ njikwa moto (ụgbọ ala na-ahụ maka moto na modul draịva VFD iche):
Iwu MW No.
Ụlọ njikwa
Ntụnye Mgbakọ
Ọnụọgụ
VFD-CB
1
Ngwa a na-ahụkarị
1 Module ugboro na-agbanwe agbanwe (usoro VFD)
2 bọọdụ njikwa nke mbanye ugboro ugboro (nke onye ọrụ ma ọ bụ Soluton mere site na MEAN WELL)
3 3-phase Pump Motor
1 Batrị
2 Module ugboro na-agbanwe agbanwe (usoro VFD)
3 bọọdụ njikwa nke mbanye ugboro ugboro (nke onye ọrụ ma ọ bụ Soluton mere site na MEAN WELL)
4 3-phase Wheel Motor maka ngwa AGV
1 Module ugboro na-agbanwe agbanwe (usoro VFD)
2 bọọdụ njikwa nke mbanye ugboro ugboro (nke onye ọrụ ma ọ bụ Soluton mere site na MEAN WELL)
3-phase moto fan
4 HEPA maka nzacha ikuku
DEMO KIT
Biko kpọtụrụ MEAN WELL maka nkọwa ndị ọzọ.
Ngwa ihe ngosi VFD bụ isi yana atụmatụ. 1 VFD-350P-230 na moto 230V arụnyere n'ime ya. 2 Mbido moto / nkwụsị / gaa n'ihu / tụgharịa / njikwa ọsọ. 3 Ngosi mmalite moto/nkwụsị/gabaga/aghachi azụ nri. 4 ngosi ọsọ moto (RDM). 5 Control Board nwere ike dochie. 6 Kwado njikọ moto mpụga.
Akwụkwọ ntuziaka nwụnye
Biko rụtụ aka na: http://www.meanwell.com/manual.html
File Name:VFD-750C-230-SPEC 2024-11-22
Akwụkwọ / akụrụngwa
 |
MEEAN nke ọma VFD-750C-230 750W AC ntinye mbanye mgbanwe ugboro ugboro nwere ọrụ PFC [pdf] Akwụkwọ ntuziaka onye nwe VFD-750C-230 750W AC Input Module mbanye na-agbanwe agbanwe na-arụ ọrụ PFC, VFD-750C-230, 750W AC Ntinye agbanwe agbanwe ugboro ugboro na arụ ọrụ PFC, Module Frequency Drive Module na arụrụ PFC, Module Module na arụrụ PFC |
