PWM-60-KN Series 60W Constant Voltagna PWM mmepụta KNX LED ọkwọ ụgbọ ala
Nkọwapụta
- Ụdị: PWM-60-12, PWM-60-24
- DC Voltage: 12V, 24V
- Enyere aha ugbu a: 5A, 2.5A
- Enyere ike 60W
- Oke mmetuta mpụta: 0-100%
- Ugboro PWM (Ụdị): 200 - 4000Hz (onye ọrụ
mgbanwe site na ETS) - Ntọlite, Oge Bilie: 500ms, 80ms / 115VAC ma ọ bụ
230VAC - Oge Njide (Ụdị): 16ms / 115VAC ma ọ bụ
230VAC - Voltage Oke: 90 - 305VAC, 127 - 431VDC
- Oke ugboro: 47 - 63 Hz
- Ihe kpatara ike (Ụdị): PF> 0.97 / 115VAC, PF
> 0.95 / 230VAC, PF> 0.92 / 277VAC @ ibu zuru oke - Mgbagwoju anya Harmonic: THD <20%
- Ịrụ ọrụ (Ụdị): 86%
- AC ugbu a (Ụdị): 0.8A / 115VAC, 0.4A /
230VAC, 0.32A / 277VAC - Inrush Ugbu a (Ụdị): Oyi mmalite 50A
(twidth=350s tụrụ na 50% Ipeak) na 230VAC - Oke. Nọmba. nke PSU na 16A sekit Breaker: 9
nkeji (onye na-emebi okirikiri nke ụdị B) / nkeji 16 (onye na-emebi okirikiri nke
ụdị C) na 230VAC
Ntuziaka ojiji ngwaahịa
Nwụnye
- Gbaa mbọ hụ na isi iyi ahụ ruru voltage na ugboro ole
chọrọ kpọmkwem na ntuziaka. - Jikọọ onye ọkwọ ụgbọ ala LED na isi iyi ọkụ na-eso wiring
Enyere eserese. - Gbanye onye ọkwọ ụgbọ ala LED na mpaghara ikuku nke ọma na-anọghị ya
ìhè anyanwụ na mmiri.
Ntọlite nchapụta
Ka ịgbanwee oke ngbanwe, soro usoro ndị a:
- Nweta ntọala mbelata site na interface ETS.
- Họrọ pasenti nbelata nke ịchọrọtage n'ime oke nke 0 ruo
100% - Nyochaa ọrụ nhụsianya site na ịnwale LED ejikọrọ
ihe ndozi.
Nchọpụta nsogbu
Ọ bụrụ na ị zutere nsogbu ọ bụla na onye ọkwọ ụgbọ ala LED, rụtụ aka na ya
ngalaba nchọpụta nsogbu nke akwụkwọ ntuziaka ma ọ bụ kpọtụrụ nkwado ndị ahịa
maka enyemaka.
FAQ
Ajụjụ: Enwere m ike iji onye ọkwọ ụgbọ ala LED a nwere ihe ndozi LED dimmable?
A: Ee, PWM-60-KN usoro LED ọkwọ ụgbọala na-akwado LED dimmable
ihe nrụnye n'ime oke ntucha a kapịrị ọnụ.
Ajụjụ: Kedu ka m ga-esi gbanwee ugboro ole PWM?
A: The PWM ugboro nwere ike gbanwee site ETS interface dị ka
kwa ntuziaka onye ọrụ nyere.
Ajụjụ: Gịnị bụ ọnụ ọgụgụ kachasị nke ndị ọkwọ ụgbọala LED nwere ike ịbụ
ejikọrọ na sekit sekit 16A?
A: Ọnụ ọgụgụ kachasị nke ndị ọkwọ ụgbọala LED dabere n'ụdị
sekit ekeji. Biko rụtụ aka na ntuziaka maka kpọmkwem
nkọwa.
PWM – 6 0 – KN 60W Constant Voltagna PWM mmepụta KNX LED ọkwọ ụgbọ ala
usoro
Akwụkwọ ntuziaka onye ọrụ
- ()
File Aha: PWM-60-KN-SPEC 2024-03-12
60W PWM Mpụta KNX LED Driver
Usoro PWM-60-KN
Nkọwapụta
Ụdị
PWM-60-12
PWM-60-24
DC VOLTAGE
12V
24V
EKWERE UGBUA
5A
2.5A
EGO IKE
60W
60W
Mpụta DIMMING nso
0 ~ 100%
FREQUENCY PWM (Ụdị) 200~4000Hz onye ọrụ nwere ike ịgbanwe site na ETS
Nhazi, ebili oge Note.2 500ms, 80ms/ 115AC ma ọ bụ 230VAC
Jidesie oge (Ụdị)
16ms / 115VAC ma ọ bụ 230VAC
VOLTAGE RANGE Rịba ama.3
90 ~ 305VAC 127 ~ 431VDC (Biko rụtụ aka na ngalaba "SATIC CHARACTERISTIC")
Ugboro ugboro
47 ~ 63Hz
IHE MGBE IKE (Ụdị)
PF> 0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC @ zuru ibu (Biko rụtụ aka na ngalaba "POWER FACTOR (PF) CharacTERISTIC"
Mkpokọta ndakpọ ndakpọ
THD< 20% (@load60%/115VAC, 230VAC; @load75%/277VAC)
Ntinye
Ịrụ Ọrụ (Ụdị) AC ugbu a (Ụdị) MKPỤRỤ ỤBỌCHỊ (Ụdị)
86%
89%
0.8A / 115VAC 0.4A / 230VAC 0.32A / 277VAC oyi mmalite 50A(twidth=350s tụrụ na 50% Ipeak) na 230VAC; Maka NEMA 410
MAX. Mba. nke PSU na 16A CIRCUIT BREAKER
Nkeji 9 (onye na-emebi okirikiri nke ụdị B) / nkeji 16 (onye na-emebi okirikiri nke ụdị C) na 230VAC
NKWUKWU UGBUA
<0.25mA / 277VAC
<0.5W
bufee
108 ~ 130% akara mmepụta ike Hiccup mode, na-agbake na-akpaghị aka mgbe ewepụrụ ọnọdụ mmejọ.
Obere oge
Mechie o/p voltage, re-ike na-agbake
Nchedo gafere VOLTAGE
15 ~ 17V mechie o/p voltage, re-ike na-agbake
28 ~ 34V
GARA Okpomọkụ Mechie o/p voltage, re-ike na-agbake
ỌRỤ NA-arụ ọrụ.
Tcase = -35 ~ +85 (Biko rụtụ aka na ngalaba "OUTPUT LOAD vs TEMPERATURE" ngalaba)
MAX. IGBU OZI.
Akpa =+85
Iru mmiri na-arụ ọrụ
20 ~ 95% RH na-abụghị condensing
Okpomọkụ Nkwakọba Gburugburu Ebe Obibi, iru mmiri -35 ~ +80, 10 ~ 95% RH
TEMP. EGO
± 0.03%/ (0 ~ 50)
VIBRATION
10 ~ 500Hz, 5G 12min./1 okirikiri, oge maka 72min. nke ọ bụla tinyere X, Y, Z axe
Ọkọlọtọ nchekwa
Rịba ama. 5
ENEC BS EN/EN61347-1, BS EN/EN61347-2-13, BS EN/EN62384 EAC TP TC 004 kwadoro
nnwere onwe, GB19510.14, GB19510.1,
Ụkpụrụ KNX
Protocol enwetara ikike
NA -ECHE VOLTAGE
Nchekwa & EMC
Nguzogide dịpụrụ adịpụ
EMC EMISSION Note.6
I/PO/P:3.75KVAC
I/PO/P: 100M Ohms / 500VDC / 25/ 70% RH
Nkwenye na BS EN/EN55015, BS EN/EN61000-3-2 Klas C (@load60%); BS EN/EN61000-3-3,GB/T 17743,GB17625.1;EAC TP TC 020
EMC IMMUNITY MTBF
nnabata na BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN / EN 61547, ọkwa ụlọ ọrụ ọkụ (Line-Line Immunity Line 2KV), EAC TP TC 020
Oge elekere 2135.2K Telcordia SR-332 (Bellcore); Oge awa 247.7K MIL-HDBK-217F (25)
Akụkụ ndị ọzọ
150*53*35mm (L*W*H)
Mbukota
0.45Kg; 30pcs/16.0Kg/1.0CUFT
IHE
1. A na-atụle paramita niile akọwaghị aha ya na ntinye 230VAC, akara ugbu a na 25 nke ọnọdụ okpomọkụ. 2. Enwere ike ịwepu ọkwa n'okpuru obere ntinye voltages. Biko rụtụ aka na ngalaba “SATIC CHARACTERISTIC” maka nkọwa. 3. A na-atụ ogologo oge nhazi oge na mmalite oyi mbụ. Ịgbanye/ Gbanyụọ onye ọkwọ ụgbọ ala nwere ike ibute mmụba nke oge akwadoro. 4. A na-ewere onye ọkwọ ụgbọ ala dị ka akụkụ nke a ga-arụ ọrụ na ngwa ikpeazụ. Ebe ọ bụ na arụmọrụ EMC ga-emetụta
site na nrụnye zuru oke, ndị na-emepụta akụrụngwa ikpeazụ ga-emezigharị Ntuziaka EMC na nrụnye zuru ezu ọzọ. (dị ka dị na https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf) 5. Usoro a na-ezute ụdị ndụ ndụ nke> 50,000 awa ọrụ mgbe Tcase, karịsịa tc point (ma ọ bụ TMP, kwa DLC). ), dị ihe dị ka afọ 75 ma ọ bụ ihe na-erughị ya. 6. Biko rụtụ aka na nkwupụta ikike na MEAN WELL's websaịtị na http://www.meanwell.com 7. The ambient okpomọkụ derating nke 3.5/1000m na fanless ụdị na nke 5/1000m na fan ụdị maka arụ ọrụ elu karịa 2000m(6500ft). 8. Maka ndetu ngwa ọ bụla na nlezianya ọrụ ntinye mmiri IP, biko rụtụ aka na ntuziaka onye ọrụ anyị tupu iji ya. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
Nkwụghachi ụgwọ ngwaahịa maka ozi zuru ezu, biko rụtụ aka na https://www.meanwell.com/serviceDisclaimer.aspx
File Aha: PWM-60-KN-SPEC 2024-03-12
60W PWM Mpụta KNX LED Driver
DIMMING ọrụ
Usoro PWM-60-KN
AC/L (Braw) AC/N (Blue)
PWM-60-KN
Ụkpụrụ nhụsianya maka mmepụta ụdị PWM A na-enweta Dimming site n'ịgbanwe usoro ọrụ nke mmepụta ugbu a.
Mpụta DC ugbu a ON
Io=0A
Gbanyụọ TON
T
Usoro ọrụ TON (%) =
×100%
T
Mbupute ugboro ugboro PWM ruo 4KHz
Vo+(Uhie Uhie) Vo-(Black) KNX+(Uhie Uhie) KNX-( Nwa)
KNXInterface Tinye akara KNX n'etiti KNX+ na KNX-. Enwere ike ibudata mmemme ngwa (database) site na katalọgụ ọnlaịnụ site na ETS ma ọ bụ site na http://www.meanwell.com/productCatalog.aspx
File Aha: PWM-60-KN-SPEC 2024-03-12
60W PWM Mpụta KNX LED Driver
ỌKWU Mpụta vs OMUME
Usoro PWM-60-KN
Ibu (%)
Ibu THD (%)
100
Ntinye 80 230VAC naanị
60 50 40
20
-35-25-10
0
15
30
50
60
Ambient okpomọkụ, Ta ()
70 (n'ihu)
Ibu (%)
100
Ntinye 80 230VAC naanị
60
40
20
-35-25
20
45
60
70
80
85 (n'ihu)
Tcase ()
AKWỤKWỌ AKWỤKWỌ
100 90 80 70 60 50 40
90 100 125 135 145 155 165 175 180 200 230 305
Ntinye VOLTAGE (V) 60Hz De-rating dị mkpa n'okpuru obere ntinye voltage.
Mkpokọta mgbasa ozi ọjọọ (THD)
Ụdị 24V, Tcase na 75
25
20
15
10
5
0
50%
60%
70%
80%
90%
Ibu
115VAC 230VAC 277VAC
100%
OKWU(%)
PF
MMADỤ IKE (PF).
Ihe dị ka afọ 75
1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1
0 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Ibu
115V 230V 277V
Ịrụ ọrụ vs ibu
Usoro PWM-60-KN nwere arụmọrụ ọrụ dị elu nke nwere ike iru 89% na ngwa ubi. Ụdị 24V, Tcase na 75
95
90
85
80
75
115V
70
230V
65
277V
60
55
50 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Ibu
File Aha: PWM-60-KN-SPEC 2024-03-12
60W PWM Mpụta KNX LED Driver
OGE NDỤ
Usoro PWM-60-KN
Oge ndụ (Kh)
120
100
80
60
40
20
0
25
35
45
55
65
75
85
Tcase()
File Aha: PWM-60-KN-SPEC 2024-03-12
60W PWM Mpụta KNX LED Driver
Usoro PWM-60-KN
Ihe Ngosi
Nzacha EMI
I/P
&
Ndị na-emezigharị
PFC fosc: 50 ~ 120KHz PWM fosc: 60 ~ 130KHz
PFC CIRCUIT
ỊGBANWE IKE
OTP
OLP
PWM & PFC njikwa
NKWUKWU &
Nzacha
OLP
DIMMING CIRCUIT
MKPỤTA Nchọpụta
OVP
Vo+ VoKNX+ KNX-
Mara: PWM fosc ebe a enweghị njikọ na mwepu PWM dimming
Nkọwapụta igwe
Ikpe Nkeji PWM-60KN:mm
AC/L (Braw) AC/N (Blue)
300±20
150 KNX bọtịnụ mmemme & LED 5
SJTW 18AWG×2C
4.5
tc 35
5
tc: Max. Ọnọdụ okpomọkụ
Njikọ KNX gụnyere n'ime igbe ahụ
300±10 Ul2464 18AWG×2C(Vo+,Vo-)
Ul2464 20AWG×2C(KNX+,KNX-) 350±10
Vo+(Uhie Uhie) Vo-(Black) KNX+(Uhie Uhie) KNX-( Nwa)
5 53
13 5
35
Mechanical view nke site arịrịọ
AC/L (Braw) AC/N (Blue)
Vo+(Uhie Uhie) Vo-(Black) KNX+(Uhie Uhie) KNX-( Nwa)
File Aha: PWM-60-KN-SPEC 2024-03-12
60W PWM Mpụta KNX LED Driver
Na -akwado ntụnye ntụnye
Usoro PWM-60-KN
Njikọ akwụkwọ ntuziaka nwụnye maka ụdị KNX
AC/L(Brown) AC/N(blue)
Vo+(RED)
+
–
Vo-(BLACK)
KNX+(RED)
Igwe ọkụ LED ma ọ bụ voltage LED bọlbụ
KNX- (BLACK) PWM KN usoro nwere ike ịbụ ETS adressing/mmemme na-enweghị njikọ na AC mains.
Ụgbọ ala KNX
Ịdọ aka ná ntị Tupu ịmalite ọrụ nrụnye ma ọ bụ nrụzi ọ bụla, biko kwụpụ ọkụ eletrik na ụlọ ọrụ ahụ. Gbaa mbọ hụ
na enweghị ike ijikọ ya ọzọ n'amaghị ama! Debe ikuku ikuku kwesịrị ekwesị gburugburu unit ahụ ma atụbakwala ihe ọ bụla na ya. Ọzọkwa, a ga-edobe mkpochapụ 10-15 cm mgbe
ngwaọrụ dị n'akụkụ bụ isi iyi ọkụ. Ntụnye mgbago na-abụghị nhazi ọkọlọtọ ma ọ bụ na-arụ ọrụ n'okpuru oke ọnọdụ okpomọkụ nwere ike ịbawanye elu
okpomọkụ akụrụngwa akụrụngwa ga-achọ de-rating na mmepụta ugbu a. Ogo dị ugbu a nke eriri isi/secondary akwadoro kwesịrị ịdị ukwuu karịa ma ọ bụ ha nhata na nke unit ahụ. Biko rụtụ aka
na nkọwapụta ya. Tc max. achọpụtara na akara ngwaahịa. Biko hụ na okpomọkụ nke Tc point agaghị agafe oke. Ejikọla "KNX- na Vo-". A na-ewere ọkụ ọkụ ahụ dị ka akụkụ nke a ga-arụ ọrụ na ngwongwo ikpeazụ. Ebe ọ bụ na EMC
arụ ọrụ ga-emetụta site na nrụnye zuru oke, ndị na-emepụta ngwá ọrụ ikpeazụ ga-emezigharị ntụziaka EMC na nrụnye zuru ezu ọzọ.
File Aha: PWM-60-KN-SPEC 2024-03-12
Akwụkwọ / akụrụngwa
 |
EZIOKWU PWM-60-KN Series 60W Constant Voltagna PWM mmepụta KNX LED ọkwọ ụgbọ ala [pdf] Akwụkwọ ntuziaka onye nwe Usoro PWM-60-KN, PWM-60-KN Series 60W Constant Voltage PWM Mmepụta KNX LED Driver, 60W Constant Voltage PWM Mmepụta KNX LED Driver, Voltage PWM mmepụta KNX LED ọkwọ ụgbọ ala, PWM Mpụta KNX LED ọkwọ ụgbọ ala, KNX LED ọkwọ ụgbọala, LED ọkwọ ụgbọala, ọkwọ ụgbọala |