MMADỤ MMA PWM-120-12 Constant Voltage PWM Mmepụta LED Akwụkwọ ntuziaka onye ọrụ

Usoro PWM-120 bụ onye ọkwọ ụgbọ ala 120W AC / DC na-egosipụta voltaji mgbe niiletage mode na mmepụta ụdị PWM. nke na-enwe ike ịnọgide na-enwe okpomọkụ na agba na nchapụta homogeneity mgbe ị na-anya ụdị ọ bụla nke Ikanam ibe. PWM-120 na-arụ ọrụ site na 90-305VAC ma na-enye ụdị dị iche iche nke voltagnke dị n'etiti 12V na 48V. N'ihi na elu arụmọrụ ruo 90.5%, na fanless imewe, dum usoro bụ ike na-arụ ọrụ maka-40 ℃-+90 Celsius C ọnọdụ okpomọkụ n'okpuru free ikuku convection. A na-eji usoro nchebe IP67 dị elu mee ihe na usoro ahụ dum ma dị mma iji rụọ ọrụ maka nkụ, damp ma ọ bụ ebe mmiri. PWM-120 nwere ọrụ dimming nke na-agbanwe usoro ọrụ nke mmepụta, na-enye nnukwu mgbanwe maka ngwa ibe ọkụ LED.

Ihe ntinye ihe nlere

Ụdị	Ọkwa IP	Ọrụ	Rịba ama
Oghere	IP67	3 na 1 dimming ọrụ (0 ~ 10Vdc, 10V PWM mgbaàmà na nguzogide)	Dị na ngwaahịa
DA	IP67	Teknụzụ njikwa DALI. (maka ụdị 12V/24V DA naanị)	Dị na ngwaahịa
DA2	IP67	Teknụzụ njikwa DALI-2. (maka 12V/24V nwere naanị ụdị DA2)	Dị na ngwaahịa

Nkọwapụta

Ụdị		PWM-120-12	PWM-120-24	PWM-120-36	PWM-120-48
Mpụta	DC VOLTAGE	12V	24V	36V	48V
	EKWERE UGBUA	10A	5A	3.4A	2.5A
	EGO IKE	120W	120W	122.4W	120W
	ỤTỌ DIMMING	0 ~ 100%
	Ugboro ugboro PWM (Ụdị)	1.47kHz maka oghere/DA-ụdị, 2.5kHz maka DA2-ụdị
	NTKWU, NA-ebili oge Rịba ama. 2Rịba ama. 9	500ms, 80ms/230VAC ma ọ bụ 115VAC
	Jidesie oge (Ụdị)	16ms / 230VAC ma ọ bụ 115VAC
Ntinye	VOLTAGE nso Rịba ama.3	90 ~ 305VAC 127 ~ 431VDC(Biko rụtụ aka na ngalaba "SATIC CHARACTERISTIC")
	Ugboro ugboro RANGE	47 ~ 63Hz
	IHE MGBE IKE (Ụdị)	PF> 0.97/115VAC, PF>0.96/230VAC, PF>0.93/277VAC @ zuru ibu(Biko rụtụ aka na ngalaba "Power FACTOR (PF) CharacTERISTIC" ngalaba)
	Mkpokọta HARMIC NKWUKWU	THD< 20%(@load≧60%/115VAC, 230VAC; @load≧75%/277VAC)(Biko rụtụ aka na ngalaba "NKWUKWU HARMONIC DISTORTION")
	OKWU (Ụdị)	88.5%	90%	90%	90.5%
	AC ugbu a (Ụdị)	1.3A / 115VAC 0.65A / 230VAC 0.55A / 277VAC
	INRUSH Ugbu a (pdị.)	Oyi malitere 60A (twidth=520μs tụrụ na 50% Ipeak) na 230VAC; Maka NEMA 410
	MAX. Mba. nke PSU na 16A CIRCUIT BREAKER	Nkeji 4 (onye na-emebi okirikiri nke ụdị B) / nkeji 6 (onye na-emebi okirikiri nke ụdị C) na 230VAC
	NKWUKWU UGBUA	<0.25mA / 277VAC
	Ọ BỤGHỊ IBU/NKWUKWU IKE	Ọ dịghị ibu ike oriri <0.5w maka oghere-ụdị; oriri ike njikere <0.5W maka ụdị DA-ụdị/DA2
Nchedo	bufee	108 ~ 130% gosiri ike mmepụta
		Ọnọdụ mgbakasị ahụ, na-agbake na-akpaghị aka ka ewepụrụ ọnọdụ mmejọ
	Obere oge	Ọnọdụ hiccup 12V / 24V na ọnọdụ 36V / 48V mechie (gụnyere ụdị DA-ma e wezụga ụdị DA2), na-agbake na-akpaghị aka mgbe ewepụsịrị ọnọdụ mmejọ (naanị maka ụdị DA2)
	N'elu VOLTAGE	15 ~ 17V	28 ~ 34V	41 ~ 46V	54 ~ 60V
		Mechie o/p voltage, re-ike na-agbake
	GARA Okpomọkụ	Mechie o/p voltage, re-ike na-agbake
Gburugburu Ebe Obibi	ỌRỤ NA-arụ ọrụ.	Tcase = -40 ~ +90 ℃ (Biko rụtụ aka na ngalaba "OUTPUT LOAD vs TEMPERATURE")
	MAX. IGBU OZI.	Akpa =+90 ℃
	Iru mmiri na-arụ ọrụ	20 ~ 95% RH na-abụghị condensing
	Nchekwa TEMP., IHU URU	-40 ~ +80 ℃, 10 ~ 95% RH
	TEMP. EGO	± 0.03% / ℃ (0 ~ 45 ℃, ma e wezụga 0 ~ 40 ℃ maka 12V)
	VIBRATION	10 ~ 500Hz, 5G 12min./1 okirikiri, oge maka 72min. nke ọ bụla tinyere X, Y, Z axe
Nchekwa & EMC	Ọkọlọtọ nchekwa Rịba ama. 5	UL8750 (ụdị "HL") (ma e wezụga maka ụdị 12DA), CSA C22.2 Nke 250.13-12; ENEC BS EN/EN61347-1 61347 kwadoro; Nhazi na-ezo aka na BS EN/EN2-13; Dabere na BS EN/EN62384-67-15885 appendix J dabara adaba maka nrụnye mberede (EL)(AC ntinye: 120-12,24Vac)(maka DA004-ụdị naanị)
	Ụkpụrụ DALI	IEC62386-101, 102 maka DA/DA207,251-Ụdị naanị, Ngwaọrụ ụdị 2(DT6)
	NA -ECHE VOLTAGE	I/PO/P:3.75KVAC; I/P-DA:1.5KVAC; O/P-DA:1.5KVAC
	Nguzogide dịpụrụ adịpụ	I/PO/P: 100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISỌ Rịba ama. 6	Nkwenye na BS EN/EN55015, BS EN/EN61000-3-2 Klas C (@load≧60%); BS EN/EN61000-3-3,GB17743 na GB17625.1,EAC TP TC 020
	EMC MGBE	nnabata na BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN / EN 61547, ọkwa ụlọ ọrụ ọkụ (Line-Line Immunity Line 2KV), EAC TP TC 020
Ndị ọzọ	MTBF	2243.7K elekere min. Telcordia SR-332 (Bellcore); 228.7K elekere min. MIL-HDBK-217F (25 ℃)
	Akụkụ	1916337.5mm (LWH)
	Mbukota	0.97Kg; 15pcs / 15.6Kg / 0.87CUFT
IHE	A na-atụle parampat niile akọwaghị aha ya na ntinye 230VAC, akara ugbu a yana 25 ℃ nke ọnọdụ okpomọkụ. Enwere ike ịchọrọ iwepụ ọkwa n'okpuru obere ntinye voltages. Biko rụtụ aka na ngalaba STATIC CHARACTERISTIC maka nkọwa. A na-atụ ogologo oge nhazi na mmalite oyi mbụ. Ịgbanye/ Gbanyụọ onye ọkwọ ụgbọ ala nwere ike ibute mmụba nke oge ahazi A na-ewere onye ọkwọ ụgbọ ala dị ka akụkụ nke a ga-arụ ọrụ na ngwa ikpeazụ. Ebe ọ bụ na nrụnye zuru ezu ga-emetụta arụmọrụ EMC, ndị na-emepụta ngwá ọrụ ikpeazụ ga-emezigharị ntụziaka EMC na nrụnye zuru ezu ọzọ. Usoro a na-ezute ogologo ndụ ndụ nke> 50,000 awa ọrụ mgbe Case, karịsịa tc point (ma ọ bụ TMP, kwa DLC), bụ ihe dịka 75 ℃ ma ọ bụ obere. Biko rụtụ aka na nkwupụta ikike na MEAN WELL's websaịtị na http://www.meanwell.com The ambient okpomọkụ mkpakọrịta nwoke na nwaanyị nke 3.5 ℃ / 1000m na finless ụdị na nke 5℃ / 1000m na fan ụdị maka ọrụ elu karịa 2000m (6500ft). Maka ndetu ngwa ọ bụla yana ịkpachara anya nrụnye ọrụ akaebe mmiri IP, biko rụtụ aka n'akwụkwọ ntuziaka onye ọrụ tupu iji ya. https://www.meanwell.com/Upload/PDF/LED_EN.pdf Dabere na IEC 62386-101 / 102 DALI ike na usoro oge na nkwụsịtụ, oge nhazi kwesịrị iji onye njikwa DALI nwalee nke nwere ike ịkwado ike DALI na ọrụ, ma ọ bụghị na oge nhazi ga-adị elu karịa 0.5 sekọnd maka ụdị DA. . ※ Nkwụghachi ụgwọ ngwaahịa: Maka ozi zuru ezu, biko rụtụ aka na https://www.meanwell.com/serviceDisclaimer.aspx

DIMMING ọrụ

* DIM+ maka ụdị oghere
DA+ maka ụdị DA/DA2
* *DIM- maka Ụdị oghere
DA- maka ụdị DA/DA2

Ụkpụrụ nbelata maka mmepụta ụdị PWM

A na-enweta ntu oyi site n'ịgbanwe usoro ọrụ nke mmepụta ugbu a.

※ 3 n'ime 1 arụrụ arụ ọrụ (maka oghere-ụdị)

Tinye otu n'ime usoro atọ dị n'etiti DIM+ na DIM-: 0 ~ 10VDC, ma ọ bụ 10V PWM mgbama ma ọ bụ nguzogide.

Na-ebelata isi iyi ugbu a site na ọkọnọ ike: 100μA (ụdị.)
- Na-etinye mgbakwunye 0 ~ 10VDC
- Itinye mgbakwunye 10V PWM mgbama (ugboro ugboro 100Hz ~ 3KHz):
- Na-etinye nguzogide mgbakwunye:

Mara:

Min. okirikiri ọrụ nke mmepụta ugbu a bụ ihe dịka 0.15%, ntinye na-ebelata ihe dị ka 6KΩ ma ọ bụ 0.6VDC, ma ọ bụ 10V PWM mgbama nwere 6% ọrụ okirikiri.

Usoro ọrụ nke mmepụta ihe ugbu a nwere ike ịdaba na 0% mgbe ntinye ntugharị na-erughị 6KΩ ma ọ bụ ihe na-erughị 0.6VDC, ma ọ bụ 10V PWM mgbama nwere usoro ọrụ na-erughị 6%.

※ DALI Interface (akụkụ nke mbụ; maka DA/DA2-ụdị)

Tinye akara ngosi DALI n'etiti DA+ na DA-.
DALI protocol nwere otu iri na isii na adreesị 16.
A na-edozi nzọụkwụ mbụ na 0.2% nke mmepụta

ỌKWU Mpụta vs OMUME

AKWỤKWỌ AKWỤKWỌ

MMADỤ IKE (PF).

Tcase na 80 ℃

※ Nwepu ọkwa dị n'okpuru obere ntinye voltage.

Mkpokọta mgbasa ozi ọjọọ (THD)

※ 48V Model, Tcase na 80 ℃

Ịrụ ọrụ vs ibu

Usoro PWM-120 nwere arụmọrụ ọrụ dị elu nke nwere ike iru 90.5% na ngwa ubi.

※ 48V Model, Tcase na 80 ℃

OGE NDỤ

Ihe Ngosi

Nkọwapụta igwe

Ụdị oghere

DA/DA2-Ụdị

Na -akwado ntụnye ntụnye

Akwụkwọ ntuziaka nwụnye

Njikọ maka ụdị oghere

Ịdọ aka ná ntị

Tupu ịmalite nrụnye ma ọ bụ ọrụ mmezi ọ bụla, biko kwụpụ ọkụ eletrik na akụrụngwa. Gbaa mbọ hụ na enweghị ike ijikọ ya ọzọ n'amaghị ama!
Debe ikuku ikuku kwesịrị ekwesị gburugburu unit ahụ ma atụbakwala ihe ọ bụla na ya. Ọzọkwa, a ga-edobe mkpochapụ 10-15 cm mgbe ngwaọrụ dị n'akụkụ bụ isi iyi ọkụ.

Ntụnye mgbago na-abụghị nhazi ọkọlọtọ ma ọ bụ na-arụ ọrụ n'okpuru ọnọdụ okpomọkụ dị elu nwere ike ịbawanye okpomoku akụrụngwa nke dị n'ime ma ga-achọkwa de-rating na mmepụta ugbu a.
Ogo dị ugbu a nke eriri isi/secondary akwadoro kwesịrị ịdị ukwuu karịa ma ọ bụ ha nhata na nke unit ahụ. Biko rụtụ aka na nkọwapụta ya.
Maka ndị ọkwọ ụgbọ ala LED nwere njikọ mmiri na-adịghị, chọpụta na njikọ dị n'etiti unit na ihe ọkụ ọkụ na-esi ike ka mmiri ghara ịbanye n'ime usoro ahụ.

Maka ndị ọkwọ ụgbọ ala LED dimmable, gbaa mbọ hụ na onye na-ahụ maka ihe na-akụda mmụọ gị nwere ike ịnya nkeji ndị a. Usoro PWM chọrọ 0.15mA nke ọ bụla.
Tc max. achọpụtara na akara ngwaahịa. Biko hụ na okpomọkụ nke Tc point agaghị agafe oke.
Ejikọla “DIM- na -V”.

Kwesịrị ekwesị maka ojiji ime ụlọ ma ọ bụ n'èzí na-enweghị ìhè anyanwụ kpọmkwem. Biko zere imikpu n'ime mmiri ihe karịrị nkeji iri atọ.
A na-ewere ọkụ ọkụ ahụ dị ka akụkụ nke a ga-arụ ọrụ na ngwongwo ikpeazụ. Ebe ọ bụ na nrụnye zuru ezu ga-emetụta arụmọrụ EMC, ndị na-emepụta akụrụngwa ikpeazụ ga-emezigharị Ntuziaka EMC na nrụnye zuru ezu ọzọ.

Akwụkwọ / akụrụngwa

MMADỤ MMA PWM-120-12 Constant Voltagna PWM Output LED Driver [pdf] Akwụkwọ ntuziaka onye ọrụ
PWM-120-12 Constant Voltage PWM Mmepụta Ọkwọ ụgbọala, PWM-120-12, Voltage PWM Mmepụta LED ọkwọ ụgbọ ala, Voltage PWM Output LED Driver, PWM Output LED Driver, Output LED Driver, LED Driver, Driver

Ntụaka

Akwụkwọ ntuziaka onye ọrụ

Atụmatụ

Ngwa

Koodu GTIN

Nkọwa