KRAMER-PT-580T-HDMI-Line-Transmitter-LOGOKRAMER PT-580T HDMI Line Transmitter

KRAMER-PT-580T-HDMI-Line-Transmitter-IMAGE

Ntuziaka a na-enyere gị aka ịwụnye na iji ngwaahịa gị nke mbụ. Maka ozi zuru ezu, gaa na http://www.kramerav.com/manual/PT-580T ka ibudata akwụkwọ ntuziaka kacha ọhụrụ ma ọ bụ nyochaa koodu QR n'aka ekpe

Kwụpụ 1: Lelee ihe dị na igbe

  • The PT-580T HDMI Line Transmitter or TP-580T ~ Mounting Brackets
    HDMI Line Transmitter or the TP-580R HDMI Line Receiver ~
  • 1 Power adapter (12V DC input for TP-SBOT/R  and SV DC for PT-SBOT)
  • Arịọnụ Brackets
  • 4 Rubber ụkwụ
  • 1 Ndenye mmalite ndu

Kwụpụ 2: Wụnye PT-580, TP-580T, TP-580R
Mount the devices in racks using the optional RK-T2B rack adapter for TP-580T and TP-SBOR and the optional RK-1T2PT rack adapter for PT-580T (available for purchase) or place them on shelves.

Kwụpụ 3: Jikọọ ntinye na ntinye
After mounting the units, connect the inputs and outputs. Always switch OFF the power on each device before connecting it to your PT-580TITP-580T and TP-580R.KRAMER-PT-580T-HDMI-Line-Transmitter-1KRAMER-PT-580T-HDMI-Line-Transmitter-2

Twisted Pair Pinout: Maka njikọ HDBaseT, lee eserese wiring dị n'okpuruKRAMER-PT-580T-HDMI-Line-Transmitter-3

Kwụpụ 4: Jikọọ ike
Connect the power adapters to the PT-580T/TP-580T and TP-SBOR and plug the adapter/s into the mains electricity.

Okwu Mmalite

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 14 groups that are clearly defined by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers; GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Video Products; GROUP 12: Digital Signage; GROUP 13: Audio; and GROUP 14: Collaboration. Congratulations on purchasing your Kramer PT-580T or TP-580T or TP-580R transmitter/receiver pair, which is ideal for the following typical applications:

  • Usoro ntule n'ime ụlọ ọgbakọ, ọnụ ụlọ, ụlọ nzukọ, ụlọ oriri na ọṅụṅụ na ụlọ ụka, ụlọ mmepụta ihe
  • Mgbazinye na stagING
    Cheta na: that PT-580T, TP-580T, and TP-580R are purchased separately, and can be connected to other HDBaseT certified transmitters and receivers, respectively.

Na-amalite

Anyị na -akwado gị:

  • Kpughee akụrụngwa ahụ nke ọma wee chekwaa igbe na ihe nkwakọ ngwaahịa maka mbupu n'ọdịnihu
  • Review ọdịnaya nke akwụkwọ ntuziaka onye ọrụ a
    gaa www.kramerav.com/downloads/PT-580T ịlele maka akwụkwọ ntuziaka onye ọrụ ọgbara ọhụrụ, mmemme ngwa, yana ịlele ma nkwalite firmware dị (ebe ọ dabara).
Imezu Ọrụ Kachasị Mma
  • Use only good quality connection cables (we recommend Kramer high-performance, high-resolution cables) to avoid interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low-quality cables)
  • Edebela eriri ndị ahụ n'ukwu siri ike ma ọ bụ tụgharịa umengwụ ka ọ bụrụ akwa mkpuchi
  • Zere ndabichi site na ngwa eletriki eletrik nwere ike imetụta ogo mgbaama
  • Position your Kramer PT-580T, TP-580T, and TP-580R transmitter/receiver pair away from moisture, excessive sunlight, and dust This equipment is to be used only inside a building. It may only be connected to other equipment that is installed inside a building.
Ntuziaka nchekwa

Kpachara anya: Enweghị akụkụ ndị na -ahụ maka ọrụ n'ime unit
Ịdọ aka ná ntị: Use only the Kramer Electronics input power wall adapter that is provided with the unit
Amụma: Kwupu ike ma kwụpụ unit na mgbidi tupu ịwụnye

Ngwaahịa Kramer megharịrị

Ntuziaka elektrọnik na ngwa elektrọnik (WEEE) nke 2002/96/EC bu n'uche belata ego WEEE ezigara maka mkpofu ahịhịa ma ọ bụ ịgba ọkụ site na -achọ ka anakọta ya ma megharịa ya. Iji rube isi n'iwu WEEE, Kramer Electronics emela nhazi na European Advanced Recycling Network (EARN), ọ ga -ekpuchikwa ụgwọ ọgwụgwọ ọ bụla, imegharị ihe na iweghachi ihe mkpofu Kramer Eletrọniki ejiri akara mbata rute n'ụlọ ọrụ EARN. Maka nkọwa gbasara nhazi mmegharị nke Kramer na obodo gị, gaa na peeji mmegharị anyị na http://www.kramerAV.com/support/recycling/.

N'imeview

This section describes the PT-580, TP-580T, and TP-580R features.

TP-580T na TP-580R karịrịview

The TP-580T and TP-580R are a high-performance, HDBaseT technology twisted pair transmitter and receiver for HDMI, bidirectional RS-232 and IR signals. The TP-580T converts the HDMI signal, RS-232 and IR input signals to a twisted pair signal. The TP-580R converts the twisted pair signal back into HDMI, RS-232, and IR signals. The TP-580T and the TP-580R can form a transmission and reception system either together or each device separately with another certified HDBaseT device. For exampN'ezie, transmitter na nnata usoro nwere ike mejupụtara nke TP-580T na-ejikọ na Kramer TP-580R na-etolite a transmitter nnata ụzọ.
Ihe ntụgharị TP-580T na njirimara nnata TP-580R:

  • Otu bandwidth ruru 10.2Gbps (3.4Gbps kwa ọwa eserese), na-akwado mkpebi 4K
  • Oke nke 70m (230ft) na 2K, 40m (130ft) na mkpebi 4K UHD
    For optimum range and performance using HDBaseT™, use Kramer’s BC−HDKat6a cable. Note that the transmission range depends on the signal resolution, source and display used. The distance using non−Kramer CAT 6 cable may not reach these ranges.
  • HDBaseT™ technology
  • Ndakọrịta HDTV na nnabata HDCP
  • HDMI support – HDMI (deep color, x.v.Color™, lip-sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS−HD, CEC, 2k, 4k, 3D)
  • EDID pass-through, passes EDID/HDCP signals from the source to the display
  • Bidirectional RS-232 interface – commands and data can flow in both directions via the RS−232 interface, allowing status requests and control of the destination unit
  • Ihe interface infrared bidirectional maka njikwa anya nke ngwaọrụ dị n'akụkụ (lee Nkebi 4.1)
  • LED status indicators for input selection, output, link, and power
  • Compact DigiTOOLS® enclosures and these can be rack mounted side-by-side in a 1U rack space with the optional RK-3T, RK-6T or RK-9T universal rack adapters
 PT-580T karịrịview

PT-580T bụ ihe na-arụ ọrụ dị elu, teknụzụ HDBaseT Twisted Pair transmitter maka akara HDMI wee tụgharịa ya na mgbama ụzọ gbagọrọ agbagọ. Ihe nnata HDBaseT (maka example the TP-580R or WP-580R) converts the twisted pair signal back into an HDMI signal and together they form a transmitter-receiver pair. The PT-580T transmitter features:

  • Otu bandwidth ruru 10.2Gbps (3.4Gbps kwa ọwa eserese), na-akwado mkpebi 4K
  • Oke nke ruru mita 70 (230 ụkwụ)
  • teknụzụ HDBaseT
  • Ndakọrịta HDTV na nnabata HDCP
  • HDMI support – HDMI (deep color, x.v.Color™, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS−HD, CEC, 2k, 4k, 3D)
  • ngafe EDID – na-ebufe akara EDID site na isi mmalite gaa na ngosipụta
  • Ihe ngosi ọkwa LED maka ike
  • Ultra-Compact PicoTOOLS™ – 4 units can be rack mounted side−by−side in a 1U rack space with the optional RK−4PT rack adapter
    For optimum range and performance using HDBaseT™, use Kramer’s BC−HDKat6a cable. Note that the transmission range depends on the signal resolution, source and display used. The distance using
    non−Kramer CAT 6 cable may not reach these ranges.
 Banyere HDBaseT™ Teknụzụ

HDBaseT™ is an advanced all-in-one connectivity technology (supported by the HDBaseT Alliance). It is particularly suitable in the consumer home environment as a digital home networking alternative where it enables you to replace numerous cables and connectors by a single LAN cable used to transmit, for example, vidiyo enweghị nkọwa zuru oke, ọdịyo, IR, yana akara njikwa dị iche iche.
Ngwaahịa ndị akọwara n'akwụkwọ ntuziaka onye ọrụ a bụ HDBaseT gbaara ama.

Iji eriri akpa abụọ agbagọ agbagọ

Kramer engineers have developed special twisted pair cables to best match our digital twisted pair products; the Kramer BC−HDKat6a (CAT 6 23 AWG cable) significantly outperforms regular CAT 5 / CAT 6 cables.
We strongly recommend that you use a shielded twisted pair cable.

Na-akọwa TP-580T HDMI Line TransmitterKRAMER-PT-580T-HDMI-Line-Transmitter-4
# atụmatụ ọrụ
1 HDBT pụọ RJ-45

njikọ

Jikọọ na HDBT IN RJ-45 njikọ na TP-580R
2 HDMI n'ime njikọ Jikọọ na isi iyi HDMI
3 AKWỤKWỌ/ỌZỌ mgba ọkụ Gaa na PROG iji kwalite na firmware Kramer ọhụrụ site na RS-232, ma ọ bụ slide na NORMAL maka ịrụ ọrụ nkịtị.
4 RS-232 9-pin D-sub njikọ Jikọọ na ọdụ ụgbọ mmiri RS-232 maka nkwalite ngwa ngwa yana njikwa ngalaba ebe aga
5 IR 3.5mm Mini-Jack Connector Connects to an external infrared transmitter/sensor (receiver)
6 12V DC + 12V DC njikọ maka ike unit
7 IN Ikanam Na-enwu akwụkwọ ndụ akwụkwọ ndụ mgbe ejikọrọ ngwaọrụ ntinye HDMI
8 Ọ BỤ Ikanam Na-enwu akwụkwọ ndụ akwụkwọ ndụ mgbe achọpụtara ngwaọrụ mmepụta HDMI
9 njikọ Ikanam Na-enwu akwụkwọ ndụ akwụkwọ ndụ mgbe njikọ TP na-arụ ọrụ
10 ON Ikanam Ọkụ mgbe ị na-anata ike
Na-akọwapụta TP-580R HDMI Line nnataKRAMER-PT-580T-HDMI-Line-Transmitter-5
# atụmatụ ọrụ
1 HDBT IN RJ-45

njikọ

Jikọọ na HDBT pụọ RJ-45 njikọ na

TP-580T

2 HDMI pụọ njikọ Jikọọ na HDMI nnabata
3 AKWỤKWỌ/ỌZỌ Button Gaa na PROG iji kwalite na firmware Kramer ọhụrụ site na RS-232, ma ọ bụ slide na NORMAL maka ịrụ ọrụ nkịtị.
4 RS-232 9-pin D-sub njikọ Jikọọ na ọdụ ụgbọ mmiri RS-232 maka nkwalite ngwa ngwa yana njikwa ngalaba ebe aga
5 IR 3.5mm Mini-Jack Connector Connects to an external infrared transmitter/sensor (receiver)
6 12V DC + 12V DC njikọ maka ike unit
7 IN Ikanam Na-enwu akwụkwọ ndụ akwụkwọ ndụ mgbe ejikọrọ ngwaọrụ ntinye HDMI
8 Ọ BỤ Ikanam Na-enwu akwụkwọ ndụ akwụkwọ ndụ mgbe achọpụtara ngwaọrụ mmepụta HDMI
9 njikọ Ikanam Na-enwu akwụkwọ ndụ akwụkwọ ndụ mgbe njikọ TP na-arụ ọrụ
10 ON Ikanam Na-enwu akwụkwọ ndụ akwụkwọ ndụ mgbe ị na-enweta ike
Nkọwapụta PT-580TKRAMER-PT-580T-HDMI-Line-Transmitter-6
# atụmatụ ọrụ
1 N'ime njikọ HDMI Jikọọ na isi iyi HDMI
2 ON Ikanam Ọkụ mgbe ị na-anata ike
3 HDBT pụọ RJ-45

njikọ

Jikọọ na HDBT IN RJ-45 njikọ na TP-580R
4 5V DC + 5V DC njikọ maka ike unit

Cheta na: Section 5 shows how to connect the PT-580T.

Njikọ njikọ RS-232KRAMER-PT-580T-HDMI-Line-Transmitter-7

Ijikọ TP-580T na TP-580R

Gbanyụọ ọkụ mgbe niile na ngwaọrụ ọ bụla tupu ị jikọọ ya na nnyefe na nnata gị. Mgbe jikọọ Transmitter na nnata gị, jikọọ ike ha wee gbanye ọkụ na ngwaọrụ ọ bụla.
Ị nwere ike iji TP-580T HDMI Line Transmitter na TP-580R HDMI Line Receiver iji hazie ihe HDMI transmitter / nnata usoro, dị ka e gosiri na ex.ample in Figure 5. To connect the TP-580T, connect the:

  1. HDMI isi iyi (maka example, ihe ọkpụkpọ DVD) na njikọ HDMI IN.
  2. RS-232 9-pin D-sub njikọ na kọmputa (maka example, laptọọpụ iji chịkwaa projector).
  3. IR 3.5mm mini-jack to an IR emitter.
  4. HDBT OUT RJ-45 connector over twisted pair to the TP-580R HDBT IN connector. Alternatively, you can use any other certified HDBaseT receiver device (for example, Kramer WP-580R)
  5. 12V DC power adapter to the power socket and connect the adapter to the mains electricity (not shown in Figure 5). To connect the TP-580R, connect the:
    Iji jikọọ TP-580R, jikọọ:
  6. Njikọ HDMI OUT na onye na-anabata HDMI (maka example, projector).
  7. RS-232 9-pin D-sub njikọ na ọdụ ụgbọ mmiri RS-232 (maka ex.ample, projector nke laptọọpụ ejikọrọ na TP-580T na-achịkwa).
  8. IR 3.5mm mini-jack to an IR sensor.
  9. HDBT IN RJ-45 njikọ karịrị ụzọ gbagọrọ agbagọ na TP-580T HDBT OUT njikọ. N'aka nke ọzọ, ịnwere ike iji ngwaọrụ mgbasa ozi HDBaseT ọ bụla (maka example, Kramer WP-580T)
  10.  12V DC power adapter to the power socket and connect the adapter to the mains electricity (not shown in Figure 5).KRAMER-PT-580T-HDMI-Line-Transmitter-8Connecting the TP-580T/TP-580R Transmitter/Receiver Pair
Ijikwa ngwa A/V site na nnyefe IR

Ebe ọ bụ na akara IR na TP-580T/TP-580R transmitter / nnata ụzọ bụ bidirectional, ị nwere ike iji a remote control transmitter (nke a na-eji maka ịchịkwa ngwa n'akụkụ, maka ex.ample, ihe ọkpụkpọ DVD) izipu iwu (na akụrụngwa A/V) site na njedebe nke sistemụ nnyefe / nnata. Iji mee nke a, ị ga-eji Kramer mpụga IR sensọ n'otu nsọtụ (P/N: 95-0104050) na Kramer IR emitter cable na nsọtụ nke ọzọ (P/N: C-A35/IRE-10)
Two IR Emitter Extension Cables are also available: a 15 meter cable and a 20 meter cable. The example na foto nke 6 na-egosi otu esi ejikwa ihe ọkpụkpọ DVD ejikọrọ na TP-580T site na iji njikwa anya, site na TP-580R. Na nke a exampLe, Mpụga IR sensọ jikọọ na IR njikọ nke TP-580R na IR Emitter jikọọ n'etiti TP-580T na DVD ọkpụkpọ. Ihe njikwa ime DVD na-eziga iwu ka ọ na-atụ aka na ihe mmetụta IR mpụga. Ihe mgbaàmà IR na-agafe na eriri TP na IR Emitter na ihe ọkpụkpọ DVD, nke na-aza iwu ezigara.KRAMER-PT-580T-HDMI-Line-Transmitter-9
Controlling a DVD Player via the TP-580R

Nke bu nke ochieample na Figure 7 na-egosi otu esi ejikwa ihe ngosi LCD ejikọrọ na TP-580R site na iji njikwa anya, site na theTP-580T. Na nke a example, the External IR Sensor is connected to the IR connector of the TP-580T and an IR Emitter is connected between the TP-580R and the LCD display. The LCD display remote control sends a command while pointing towards the External IR Sensor. The IR signal passes through the TP cable and the IR Emitter to the LCD display, which response to the command sent.KRAMER-PT-580T-HDMI-Line-Transmitter-10 Controlling an LCD Display via the TP-580T

Ijikọ na PC

Ebe ọ bụ na akara IR na TP-580T/TP-580R transmitter / nnata ụzọ bụ bidirectional, ị nwere ike iji a remote control transmitter (nke a na-eji maka ịchịkwa ngwa n'akụkụ, maka ex.ample, ihe ọkpụkpọ DVD) izipu iwu (na akụrụngwa A/V) site na njedebe nke sistemụ nnyefe / nnata. Iji mee nke a, ị ga-eji Kramer mpụga IR sensọ n'otu nsọtụ (P/N: 95-0104050) na Kramer IR emitter cable na nsọtụ nke ọzọ (P/N: C-A35/IRE-10)
Two IR Emitter Extension Cables are also available: a 15 meter cable and a 20 meter cable. The example na foto nke 6 na-egosi otu esi ejikwa ihe ọkpụkpọ DVD ejikọrọ na TP-580T site na iji njikwa anya, site na TP-580R. Na nke a example, the External IR Sensor is connected to the IR connector of the TP-580R and an IR Emitter is connected between the TP-580T and the DVD player. The DVD remote control sends a command while pointing towards the External IR Sensor. The IR signal passes through the TP cable and the IR Emitter to the DVD player, which responds to the command senKRAMER-PT-580T-HDMI-Line-Transmitter-11Njikwa RS-232

Ijikọ PT-580T

Always switch off the power to each device before connecting it to your PT-580T and the receiver. After connecting your PT-580T/receiver, connect the power and then switch on the power to each device.
Iji jikọọ PT-580T na onye nnata (maka example, TP-580R), dị ka e gosiri na exampna foto 9, mee ihe ndị a:

  1. Jikọọ isi iyi HDMI (maka example, ihe ọkpụkpọ DVD) na njikọ HDMI IN.
  2.  Connect the HDBT OUT RJ-45 connector over twisted pair to the TP-580R HDBT IN connector.Alternatively, you can use any other certified HDBaseT receiver device (for example, Kramer WP-580R)
  3. On the TP-580R, connect the HDMI OUT connector to an HDMI acceptor (for example, projector).
  4. Connect the 5V DC power adapter to the power socket on the PT-580T and the 12V DC power adapter to the power socket on the TP-580R and connect the adapter to the mains electricity (not shown in Figure 9).KRAMER-PT-580T-HDMI-Line-Transmitter-12

Ijikọ njikọ RJ-45

Akụkụ a na-akọwa pinout TP, na-eji eriri pin-to-pin kwụ ọtọ nwere njikọ RJ-45.
Cheta na: that the cable Ground shielding must be connected/soldered to the connector shield.

E IA /TIA 568B
PIN Agba Waya
1 Oroma / Ọcha
2 Orange
3 Agba Ọcha / Ọcha
4 Blue
5 Agba / Ọcha
6 Green
7 Agba aja / White
8 Brown

KRAMER-PT-580T-HDMI-Line-Transmitter-13

Nka na ụzụ nkọwa

TP-580T TP-580R
Ntinye: 1 HDMI njikọ 1 RJ-45 njikọ
Mpụga: 1 RJ-45 njikọ 1 HDMI njikọ
Ụgbọ mmiri: 1 IR na obere jakị 3.5mm (maka emitter ma ọ bụ ihe mmetụta)

1 RS-232 na njikọ 9-pin D-sub

1 IR na obere jakị 3.5mm (maka emitter ma ọ bụ ihe mmetụta)

1 RS-232 na njikọ 9-pin D-sub

MAX. Ọnụọgụgụ DATA: Ruo 10.2Gbps (3.4Gbps n'otu ọwa eserese)
Dịgasị: 70m (230ft) na 2K, 40m (130ft) na mkpebi 4K UHD
Ọnụego BAUD RS-232: 115200
Nkwekọrịta na ọkọlọtọ HDMI: Na-akwado HDMI na HDCP
Ọrụ okpomọkụ: 0 Celsius ruo + 40 Celsius C (32 Celsius ruo 104 Celsius)
Okpomọkụ okpomọkụ: -40 Celsius ruo + 70 Celsius C (-40 Celsius ruo 158 Celsius F)
ỊDỊ umeala n'obi: 10% gaa na 90%, RHL na-abụghị condensing
MGBE AHỤRỤ: 12V DC, 275mA 12V DC, 430mA
DIMENSIONS: 12cm x 7.15cm x 2.44cm (4.7″ x 2.8″ x 1.0″) W, D, H.
Nri: 0.2 n'arọ (0.44 lbs)
Akụkụ Mbupu: 15.7cm x 12cm x 8.7cm (6.2″ x 4.7″ x 3.4″) W, D, H.
Ibu mbupu: 0.72kg (1.6 lbs).
Gụnyere ngwa mma: 2 Nkeji na-enye ọkụ 12V/1.25A
Nhọrọ: RK-3T 19” rack mount; Kramer external IR sensor (P/N: 95- 0104050), Kramer IR emitter cable (P/N: C-A35/IRE-10);

Kramer BC−HDKat6a cable

Nkọwapụta ga-agbanwe na-enweghị ọkwa

Gaa anyị Web saịtị na http://www.kramerav.com iji nweta ndepụta nke mkpebi

PT-580T
Ntinye: 1 HDMI njikọ
Mpụga: 1 RJ-45 njikọ
BANDWIDTH: Na-akwado bandwit ruo 3.4Gbps kwa ọwa eserese
Nkwekọrịta na ọkọlọtọ HDMI: Na-akwado HDMI na HDCP
Ọrụ okpomọkụ: 0 Celsius ruo + 40 Celsius C (32 Celsius ruo 104 Celsius)
Okpomọkụ okpomọkụ: -40 Celsius ruo + 70 Celsius C (-40 Celsius ruo 158 Celsius F)
ỊDỊ umeala n'obi: 10% gaa na 90%, RHL na-abụghị condensing
MGBE AHỤRỤ: 5V DC, 570mA
DIMENSIONS: 6.2cm x 5.2cm x 2.4cm (2.4 ″ x 2.1 ″ x 1 ″) W, D, H
Nri: 0.14 n'arọ (0.3 lbs)
Akụkụ Mbupu: 15.7cm x 12cm x 8.7cm (6.2″ x 4.7″ x 3.4″) W, D, H.
Ibu mbupu: 0.4 n'arọ (0.88 lbs)
Gụnyere ngwa mma: 5V DC ike ọkọnọ
Nhọrọ: 19" RK-4PT ihe nkwụnye ọkụ; Kramer BC-HDKat6a eriri
Nkọwapụta ga-agbanwe na-enweghị ọkwa

Gaa anyị Web saịtị na http://www.kramerav.com iji nweta ndepụta nke mkpebi

For the latest information on our products and a list of Kramer distributors,visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc: All brand names, product names, and trademarks are the property of their respective owners
Anyị na -anabata ajụjụ, nzaghachi na nzaghachi gị.
Web saịtị: www.KramerAV.com
E-mail: [email protected]

Akwụkwọ / akụrụngwa

KRAMER PT-580T HDMI Line Transmitter [pdf] Akwụkwọ ntuziaka onye ọrụ
PT-580T, TP-580T, TP-580R, PT-580T HDMI Line Transmitter, PT-580T, HDMI Line Transmitter

References

Hapụ ikwu

Na adreesị email gị agaghị bipụtara.