GL iNet FGB-01 Open Source Remote KVM
Ka anyị malite
Achọrọ enyemaka? Nyochaa koodu QR maka nkuzi vidiyo na ntuziaka onye ọrụ.
Ọdịnaya ngwugwu
Nhazi
- Wepu taabụ ikewapụ batrị rọba.
- Remove the cover from the notch on 1he side of the device.
- Take out the USB dongle. (FGB-01-D)
- Insert the USB dongle into the Comet {GL-RM1 ).
- The FingerBot can be controlled through the GLKVM app
Ịwụnye
- Clean the surface of the device before Installation.
- Peel off the protective sticker from 1he adhesive on the bottom of the FingerBolt.
- Stick the FingerBat near the control button of 1he device.
- Testing pressure levels
The FingerBot features two different pressing levels. You can adjust the level at any time through the GLKVM App.- Light Press Mode: Use for shorter keys.
- Hird Press Mada: Use for longer key.
- Operation made
- The FlngerBot features two different operation modes.. You can adjust the modes at any time through the GLKVM App.
- Press Mode: Pressing the button or controlling one-way switches. Ideal for tasks like powering on a PC.
- lnstallallan an the laplap
Mara: Only for laptops with edge-mounted power buttons.- Secure the bracket in the desired position and tighten it.
- Attach the FingerBot to the bracket and test its alignment.
- Tesl button
Use the test button to find your preferred pressing level:- First press – FingerBot extends to Light Press.
- Second press – FlngerBot extends to Hard Press.
- Third press – FingerBot retracts.
Dochie batrị
How ta replaC41 your battery;
- Kwadebe batrị CR2.
- Remove the cowr from 1he notch on the side of the device.
- Dochie batrị.
- Put the cover back on the device
Nkwado
Set up video and FAQs
Maka nkọwa zuru ezu na nke emelitere, biko gaa na nke anyị websaịtị
- https://link.gl-inet.com/fgb-01-userguide-support
- Email:
- Esemokwu:
- Reddit:
- Nzukọ:
NKWUKWU
- We provide a two-year limited warranty for the product and a 3-month limited warranty for accessories.
- An extra warranty may apply according to the local law in which the product purchase took place.
- Any damage to the caused by not following the instructions will render this warranty null and void.
- Any damage to the product caused by modifying the PCBA, components, or case will render this warranty null and void.
- Okwu kpatara site na iji firmware nke atọ nwere ike ọ gaghị enweta nkwado gọọmentị n'aka anyị.
- Any damage to the product caused by inappropriate use, e.g., inappropriate voltage input, high temperature, dropping in the water or on the ground, will render this warranty null and void.
- Pictures in the instructions are only for reference. We reserve the right to change or modify these materials without further notice.
Ụlọ ọrụ Hong Kong
GL Teknụzụ (Hong Kong) Oke 601, Ụlọ 5W, Hong Kong Science Park, Shatin, NT, Hong Kong
Ụlọ ọrụ Shenzhen
Shenzhen Guanglianzhitong Tech Co., Ltd. Ụlọ 305 – 306, Skyworth Digital Building, Shiyan Street, Baoan District, Shenzhen, China, 518000 (+86-0755-86606126)
FCC ịdọ aka ná ntị
Iji mesie nkwenye na-aga n'ihu, mgbanwe ma ọ bụ mgbanwe ọ bụla nke ndị otu ahụ akwadoghị. Ndị na-ahụ maka nnabata nwere ike imebi ikike onye ọrụ iji rụọ akụrụngwa a.
Nkwupụta FCC
Ngwa a na-akwado akụkụ 15 nke Iwu FCC. A na-arụ ọrụ n'okpuru ọnọdụ abụọ a:
- Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ, yana
- Ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike ibute ọrụ na-achọghị.
IHE: A nwalere ngwa a wee hụ na ọ dabara na oke maka ngwaọrụ dijitalụ Klas B, dabere na akụkụ 15 nke iwu FCC. Emebere oke ndị a iji nye nchebe ezi uche dị na ya megide nnyonye anya na-emerụ emerụ na ntinye ụlọ. Akụrụngwa a na-ewepụta, na-eji ma nwee ike ịgbasa ike ugboro redio yana, ọ bụrụ na etinyeghị ya ma jiri ya dịka ntuziaka ahụ siri dị, nwere ike ibute ndabichi na-emerụ ahụ na nkwukọrịta redio. Agbanyeghị, enweghị nkwa na nnyonye anya agaghị eme na otu nrụnye. Ọ bụrụ na akụrụngwa a na-ebute nnyonye anya na-emerụ ahụ na nnabata redio ma ọ bụ telivishọn, nke enwere ike ikpebi site na ịgbanyụ ma gbanye akụrụngwa, a na-agba onye ọrụ ume ka ọ nwaa idozi nnyonye anya site na otu ma ọ bụ karịa n'ime usoro ndị a:
- Megharịa ma ọ bụ bugharịa antenna nnata.
- Mee ka nkewa dị n'etiti akụrụngwa na nnata.
- Jikọọ akụrụngwa n'ime oghere na sekit dị iche na nke ejikọrọ onye nnata.
- Kpọtụrụ onye na-ere ahịa ma ọ bụ onye ọrụ redio/TV nwere ahụmahụ maka enyemaka.
Nkwupụta Mkpughe Radiation FCC
The equipment complies with the FCC Radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. EU Declaration of Conformity Hereby, GL Technologies (Hong Kong) Limited declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53 /EU and 2011/65/EU. A copy of the EU Declaration of Conformity (DoC) is available online at https://www.gl-inet.com/products/certificate.
kpachara anya
Ihe ize ndụ nke ọkụ ma ọ bụ mgbawa ma ọ bụrụ na ejiri ụdị na-ezighi ezi dochie batrị.
- Dochie batrị nwere ụdị na-ezighi ezi nke nwere ike imeri ihe nchekwa (maka mbuample, n'ihe banyere ụfọdụ ụdị batrị lithium).
- Ntụnye batrị n'ime ọkụ ma ọ bụ oven dị ọkụ, ma ọ bụ n'ụzọ igwe ihichapụ ma ọ bụ igbutu batrị, nke nwere ike ibute mgbawa.
- Ịhapụ batrị n'ime oke ikuku gbara okirikiri nke nwere ike ibute mgbawa ma ọ bụ mgbapụta nke mmiri ma ọ bụ gas na -ere ọkụ; na
- Batrị nwere oke ikuku ikuku dị ala nke nwere ike ibute mgbawa ma ọ bụ mwepu nke mmiri mmiri ma ọ bụ gas na-ere ọkụ.
Akwụkwọ / akụrụngwa
 |
GL iNet FGB-01 Open Source Remote KVM [pdf] Akwụkwọ ntuziaka onye ọrụ FGB01D, 2AFIW-FGB01D, 2AFIWFGB01D, FGB-01 Open Source Remote KVM, FGB-01, Open Source Remote KVM, Source Remote KVM, Remote KVM, KVM |