CHESONA -logo

GUIDE GUIDE
iPad Pro 12.9 case with keyboard

CHESONA YF150 iPad Pro 12 9 Case with Keyboard-

Nkwado ndị teknuzu

If you have any issues or questions, let us know ASAP! We would love to get you taken care of right away! All units come with a full 12-month warranty, so you can relax and take comfort in your purchase.

Ngwugwu gụnyere

1 xTouchpad keyboard with case
1x Type-C Charging Cable.
1 x ntuziaka onye ọrụ

Nchaji

  1. Plug the Type-C end of the charging cable into the keyboard and the USB end into your preferred USB charger (USB charger is not included).
  2. Fully charge your keyboard or charge it for more than 3 hours before you use it for the first time.

Atụmatụ ahụigodo

CHESONA YF150 iPad Pro 12 9 Case with Keyboard-Features

Njikwa ọkụ azụ

CHESONA YF150 iPad Pro 12 9 Case with Keyboard-control

Note

  1. If the Backlit was turned off by CHESONA -iconletter, please press CHESONA -iconagain to turn on the Backlit.
  2. If the Backlit was turned off by Fn+ A/S/D, please press Fn+A/S/D again to turn on the Backlit.
  3. The backlight function will be turned off automatically when the battery is low.

Nkọwa Key Function

CHESONA YF150 iPad Pro 12 9 Case with Keyboard-key

How to get the keyboard to sync with iPad

  1. Power on the keyboard by sliding the On/Off switch to the on position.
  2. Press ‘FN’CHESONA -icon1 and the letter ‘C’CHESONA -icon2, together. NO, The PAIR indicator will flash slowly, the keyboard’s Bluetooth is now active.
  3. Turn on Bluetooth on your iPad.
  4. Open the iPad Bluetooth Search when the Bluetooth pair lights start blinking.
  5. “Bluetooth Keyboard” will appear on the search page. Select it and the Bluetooth will be connected.

Cheta na: If no button is pressed for 10 minutes, the keyboard will enter sleep mode to save power. Press any key on the keyboard to wake up the Bluetooth to get it to work again. You don’t need to re-connect the Bluetooth.

CHESONA YF150 iPad Pro 12 9 Case with Keyboard-fig1

Trackpad/Indicator Overview

CHESONA YF150 iPad Pro 12 9 Case with Keyboard-fig2

CHESONA -icon3Turn the touchpad function on/off Use the key combination to turn the touchpad on or off. Indicator Light

Ìhè njiri mara

CapsLock Indicator Light:
Press the Caps Lock key and the indicator light will turn on.
Wireless Connect Indicator:
Press the “Fn+C” button combination and the indicator light will flash slowly and enter BT pairing mode. When the pairing is complete, the light will go out.
Ìhè Ngosipụta Nchaji:
Slowly flashing red light means the battery is low. The charging light will turn green once the charging is complete.

iOS: Trackpad Gestures

Cheta na: Please upgrade your iPad to the latest iOS version (13.4.1 and above is the best) iOS 13.4.1 mouse function is enabled: “Settings” – “Accessibility”- “Touch” – “Assistive Touch”- “Open”

Mmegharị trackpad iOS usoro Mmegharị trackpad iOS usoro
CHESONA -icon4 Click. Press with one finger until you feel a click. CHESONA -icon5 Drag. One finger presses and the other finger slides on the trackpad to drag it.
CHESONA -icon6 Click and Hold. Press and hold with one finger CHESONA -icon4 Wake iPad. Click the trackpad. Or, if you’re using
an external keyboard, press any key.
CHESONA -icon7 Open the Dock. Use one finger to swipe the pointer past the bottom of the screen. CHESONA -icon8 Go Home. Use one finger to swipe the pointer past the bottom of the screen. After the Dock appears,-swipe the pointer past the bottom of the screen again. Alternatively, click the bar at the bottom of the screen(on an iPad with Face ID)
CHESONA -icon9 View Slide Over. Use one finger to swipe the pointer past the right edge of

the screen. To hide Slide Over, swipe right

ọzọ.

CHESONA -icon10 Open Control Center. Use one finger to move the pointer to select the status icons at the top right, then click. Or, select the status icons at the top right, then swipe up with one finger
CHESONA -icon11 Open Notification Center. Use one finger to move the pointer past the top of the screen near the middle. Or, select the status icons at the top left, then click. CHESONA -icon12 Scroll up or down. Swipe two fingers up or down.
CHESONA -icon13 Scroll left or right. Swipe two fingers left or right. CHESONA -icon14 Zoom. Place two fingers near each other. Pinch open to zoom in, or pinch closed to zoom out.
CHESONA -icon16 Go Home. Swipe up with three fingers. CHESONA -icon17 Switch between open apps. Swipe left or right with three fingers.
CHESONA -icon18 Mepee Taa

View. When the Home screen or the Lock screen is visible, use two screen Swipe fingers to swipe right.

 

CHESONA -icon19

Open search from the Home down with two fingers.
CHESONA -icon20 Secondary click. Click with two fingers to show the quick actions menu for items like icons on the Home screen, messages in a mailbox, and the Camera button in Control Center. Or, if you’re using an external keyboard, you can press the Control key while you click the trackpad.

 Ntinye na mwepu

  1. Removing the back protective piece: hold the iPad on both sides and use your thumbs to gently push off the back cover (see photo.) The cover is held in place by two tabs.
  2. Gaa n'ihu ka ''hichapụ' mkpuchi ahụ pụọ na iPad.
  3. Take the iPad out upwards. Or Find out an expired card Insert the card into the gap and push the card to the side of the cover a little bit Slide the card from one side to another Separate the iPad from the cover easily

CHESONA YF150 iPad Pro 12 9 Case with Keyboard-fig5

nkọwa

Vol -arụ ọrụ Voltage 3.0-4.2V Ugbu a ≤1mA
batrị ikike 450mAh Nchaji Ugbu a 200mA
Na-arụ ọrụ Ugbu A 85-120MA Ihi ụra Ugbu A <40uA
Nchaji Time 2-3 awa Oge edemede 2-3 sekọnd
Oge Njikere 180 ụbọchị Jikọọ Anya ≤10 mita
Ntinye Port -Dị-C USB Na-arụ ọrụ okpomọkụ -10 ° C-55 ° C
ọrụ Oge 50 hours continuous use time when the backlit is off 5 hours continuous use time when the backlit is on

Na-arụ ọrụ Environment

  1. Stay away from oil, chemical or other organic liquids.
    Note: liquid intake can lead to a short circuit. 
  2. Stay away from 2.4G frequency items such as microwave ovens and routers.
    Note: it will interfere with Bluetooth.
  3. Avoid sunlight exposure and high temperatures.

Ntọala ejibu ụzọ

  1. Turn on the Lock/Unlock After your iPad is connected to our keyboard via Bluetooth, please go to iPad Settings – Display & Brightness -Lock/Unlock – turn it on.
    Cheta na: If the Lock/Unlock function is not turned on, you can’t wake up the Bluetooth function or the iPad by pressing any key on the keyboard once the iPad is in sleep mode.
    CHESONA YF150 iPad Pro 12 9 Case with Keyboard-fig9
  2. Turn off the mouse key function Go to iPad Settings -Accessibility – Touch – Assistive touch – Mouse key- turn it off. Note: If the mouse key function is not turned off, you will be unable to use the ‘7,8,9’ or ‘U, I, 0, J, K, L, M’ keys.

CHESONA YF150 iPad Pro 12 9 Case with Keyboard-fig8

Akwụkwọ / akụrụngwa

CHESONA YF150 iPad Pro 12.9 Case with Keyboard [pdf] Ntuziaka onye ọrụ
YF150, YF150 iPad Pro 12.9 Case with Keyboard, iPad Pro 12.9 Case with Keyboard, Keyboard

Soro mkparịta ụka ahụ

1 Comment

  1. Is it possible to turn down the sensitivity of the touchpad? It often jumps the cursor in a document when I’m typing even though I don’t want that.

Hapụ ikwu

Na adreesị email gị agaghị bipụtara.