Agafee H3 Na-agba ọsọ Man Combo Ụzọ ọpụpụ

Ozi ngwaahịa

Nkọwapụta

Oke	Nkọwa	Uru
Nlereanya	JRMECW	Anaghị echekwa ya
Ụdị ọrụ		Tụkwasịnụ Voltage	120/347V/60Hz
Mmepụta Voltage	4.5VDC
Ike mmepụta	4W
Mmepụta Lumen	150+Lm
Okpomọkụ agba	6000K-7000K
Batrị	3.6V 1000mAh Ni-Cd batrị
Ọnụ ego kacha ugbu a (mA)	AC:110mA/DC:230mA
Mwepu kacha ugbu a (mA)	800mA
Oge Nchaji	24H
Oge mgbapụta	90Nkeji
Igwe ọkụ	14 LEDS + 2 * 1.2W LED lamp isi
Nha ịbụ	2.7LBS
Mkpokọta nha	2.76LBS
Ogo IP	IP20
Asambodo	Edepụtara UL
Akwụkwọ ikike	Akwụkwọ ikike afọ ise maka akụkụ eletrik na ụlọ; Atọ afọ akwụkwọ ikike maka batrị.

Nwụnye
Iji wụnye H3TM Running Man Combo Exit Sign LED Light Emergency Light, soro usoro ndị a:

1. Gbaa mbọ hụ na agbanyụrụ ọkụ tupu echichi.
2. Tinye akara ngosi ọpụpụ n'ebe a ma ama nke a na-ahụ ngwa ngwa ma ọ bụrụ na ihe mberede mere.
3. Jikọọ ọkụ ọkụ kwesịrị ekwesị dị ka voltage chọrọ (120/347V/60Hz).
4. Ọ bụrụ na ọ dị mkpa, gbanwee ntụzịaka nke akara ọpụpụ iji hụ na ọhụhụ kacha mma.
5. Ozugbo etinyere ya, nwalee ịrụ ọrụ nke akara ọpụpụ iji hụ na ọ na-enwu nke ọma n'oge ihe mberede.

Akụkụ

Akụkụ nke H3TM Running Man Combo Exit Sign LED Light Emergency Light bụ:

• Ogologo: 9.05 sentimita asatọ
• Ogologo: 13.58 sentimita asatọ
• Omimi: 1.97 inch

Ajụjụ A na-ajụkarị (FAQ)

• Ajụjụ: Gịnị bụ akwụkwọ ikike mkpuchi maka ngwaahịa a?
  A: Ngwaahịa na-abịa na akwụkwọ ikike afọ ise maka akụkụ eletrik na ụlọ, yana akwụkwọ ikike afọ atọ maka batrị.
• Ajụjụ: Gịnị bụ ọkwa IP nke ngwaahịa a?
  A: Ngwaahịa ahụ nwere ọkwa IP20.
• Ajụjụ: Gịnị bụ agba okpomọkụ nke LED?
  A: The agba okpomọkụ nke ikanam bụ 6000K-7000K.

Njirimara ngwaahịa

• SKU # 155391
• Ike mmepụta: 4W
• Lumen: 150+lm
• CCT: 6000K-7000K
• Ụlọ ABS thermoplastic nke a na-akpụzi injection
• Oge nchaji: 24H
• Oge mbupu: 90MIN
• Volt ntinye: 120/347V/60Hz
• Batrị: 3.6V 1000mAh Ni-Cd batrị
• Ogo IP: IP20
• Igwe ọkụ: 14 LEDS + 2 * 1.2W Igwe ọkụ ọkụamp isi
• Asambodo: UL Edepụtara
• Akwụkwọ ikike: (akwụkwọ ikike afọ 5 maka akụkụ eletrik na ụlọ; akwụkwọ ikike afọ 3 maka batrị)

Nkọwapụta

Oke	Nkọwa na	Uru
Izugbe Arụmọrụ	Nlereanya	JRMECW
	Ụdị ọrụ anaghị echekwa ya
	Tụkwasịnụ Voltage	120/347V/60Hz
	Waltagna 6W Max
	Mmepụta Voltage	4.5VDC
	Ike mmepụta	4W
	Mmepụta Lumen	150+Lm
	Okpomọkụ agba	6000K-7000K
	Batrị	3.6V 1000mAh Ni-Cd batrị
	Ọnụ ego dị ugbu a (mA) AC: 110mA/DC:230mA
	Mwepu kacha ugbu a (mA)	800mA
	Oge Nchaji	24H
	Oge mgbapụta	90Nkeji
	Ikanam	14 LEDS + 2 * 1.2W LED lamp isi
	Nha ịbụ	2.7LBS
	Mkpokọta nha	2.76LBS
	Ogo IP	IP20
	Asambodo	Edepụtara UL
	Akwụkwọ ikike	Akwụkwọ ikike afọ ise maka akụkụ eletrik na ụlọ; Akwụkwọ ikike maka batrị afọ atọ

Akụkụ

Nwụnye

AKWỤKWỌ Mpụga Foto na Nchikota Ìhè Ọsọ Mberede
Nchekwa dị mkpa Gụọ ma soro ntuziaka nchekwa niile.

1. Review eserese ahụ nke ọma tupu ịmalite.
2. Njikọ eletrik niile ga-abụrịrị site na koodu mpaghara, iwu na koodu eletrik nke mba.
3. Kwupu ike na fiusi ma ọ bụ sekit breaker tupu ịwụnye ma ọ bụ rụọ ọrụ.
4. Ejila n'èzí.
5. Awụkwasịla n'ebe dị ize ndụ, ma ọ bụ nso gas ma ọ bụ igwe ọkụ eletrik.
6. Ekwela ka eriri ọkụ metụ elu dị ọkụ.
7. Ekwesịrị ịkwanye akụrụngwa n'ebe dị elu na ebe a na-agaghị etinye ya na tampsite n'aka ndị ọrụ na-enweghị ikike.
8. Ojiji ngwa ngwa nke onye nrụpụta akwadoghị nwere ike ibute ọnọdụ adịghị mma.
9. Ejila akụrụngwa a maka ndị ọzọ karịa ebumnuche ebumnuche.
10. Ọ bụ naanị ndị ọrụ ruru eru kwesịrị ịrụ ọrụ niile.
11. Kwe ka batrị chajị awa iri abụọ na anọ tupu ojiji mbụ.

Jiri naanị ikuku na-agbanwe agbanwe

Chekwaa ntuziaka ndị a

N'ịchọpụta dijram

AC Waya

• Jikọọ waya ọcha na nnọpụiche.
• Ọ bụrụ na ị na-eji 120V, jikọọ waya ojii na ndu ọkụ.
• Ọ bụrụ na ị na-eji 347V, jikọọ waya uhie na ndu ọkụ.
• Kpuchie ndu nke ejighi ya.

Mgbakọ Lamp Isi

1. Jiri screwdriver dị larịị mepee mkpuchi ihu.
2. Fanye lamp isi na nkuku nke isi etiti. Họrọ ntụzịaka nke lamp isi tupu itinye ya.
3. Jikọọ njikọ nwoke na lamp isi na njikọ nwanyi na PCBA.

Ntuziaka ntinye

Ihe nrụnye kwesịrị ekwesị maka mgbidi mgbidi, n'akụkụ akụkụ, n'elu ụlọ.

1. Mepee mkpuchi ihu ma kpokọta 2 pcs lamp isi na etiti.
2. Knockout kwesịrị ekwesị ugwu ịghasa oghere na cable oghere, na-egbenye azụ efere na mgbidi mgbe nri ụlọ AC ọkọnọ cable n'ime azụ efere (lee fig 3).
3. Maka ebumnuche nrịgo elu na akụkụ, wepụ ihe mkpuchi oghere nke dị n'elu ma ọ bụ n'akụkụ nke unit ahụ, ma kpọkọta ihe mkpuchi (lee Fig 4,5,6).
4. Tinye crossbar na igbe nkwụsịtụ, tọọ ogologo agụba nke crossbar na-emetụ J-Box.
5. Nyefee eriri ndị kwesịrị ekwesị site na oghere na-ebuli elu site na ụlọ ahụ.
6. Mee njikọ eletrik n'ime J-Box dị ka eserese wiring.
7. Tinye waya karịrị akarị n'ime igbe J-Box, jiri skru mee ka mkpuchi ahụ sie ike na crossbar nke mere na a na-ekedo mkpuchi ahụ nke ọma ma sie ike na mgbidi ahụ.
8. Tinye njikọ batrị na bọọdụ PC, weghachite mkpuchi ihu na unit ahụ, ma dozie ọnọdụ lamp isi dị ka mkpa.
9. Ọ bụrụ na ntụzịaka pictogram gbakọtara adabaghị, enwere ike ịwepụta eserese ahụ maka ntụzịaka mgbanwe ma ọ bụ dochie eserese ahụ, wee tinye ya n'ime ngwa mgbasa ozi (Lee Fig 7).

Na-ejikọta Isi Isi

• Iji 1pc batrị, enweghị ike ime.
• Iji batrị 2pcs nwere ikike dịpụrụ adịpụ.
• Jikọọ waya ndọtị isi nke dịpụrụ adịpụ na waya dịpụrụ adịpụ, odo dị mma), odo odo na-adịghị mma (-). jikọọ wires na iji waya akụ.

Ntụaka ikike ime anya n'okpuru:

1. KDR-880-(HO)2RC nwere oke. 3.6V 2W ike ime.
2. KDR-880-4RC nwere oke. 3.6V 4W ike ime.

Foto ngwa

Ngwugwu

Katọn (inch)	Qty / Katọn	Net arọ / katọn	Nnukwu ibu / katọn
14.37 x 9.76 x 6.14	2 PC	5.51LBS	6.28LBS

Akwụkwọ ikike

• Akwụkwọ ikike afọ ise maka akụkụ eletrik na ụlọ.
• Akwụkwọ ikike maka batrị afọ atọ.

866-786-1117
www.BeyondLEDTechnology.com
N'ihi nkwalite ngwaahịa na-aga n'ihu, ozi dị na akwụkwọ a nwere ike ịgbanwe.

Akwụkwọ / akụrụngwa

Agafee H3 Na-agba ọsọ Man Combo Ụzọ ọpụpụ [pdf] Akwụkwọ ntuziaka H3, H3 na-agba ọsọ nwoke combo ụzọ ọpụpụ, onye na-agba ọsọ Combo Exit Sign, Man Combo Exit Sign, Combo Exit Sign, Combo Exit Sign

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ