Okwu mmalite
Thank you for choosing the roborock Saros 20 Robot Vacuum and Mop. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your device. Please read it thoroughly before use and retain it for future reference.
Melite
Iwepu na ntinye
Carefully remove all components from the packaging. Ensure all parts listed in the packing list are present. Place the RockDock charging station in an open area with sufficient clearance for the robot to maneuver.
- Ensure at least 75cm (29.5 inches) clearance above the dock for tank removal.
- Ensure at least 40cm (15.7 inches) clearance on both sides of the dock.
- Ensure at least 120cm (47.2 inches) clearance in front of the dock.
Image: All components of the roborock Saros 20, including the robot vacuum, RockDock, mop pads, power cord, cleaning solution, and user manual.
Connecting the RockDock
- Connect the power cord to the back of the RockDock.
- Tinye nkwụnye ọkụ n'ime oghere mgbidi.
- Install the dock base by sliding it into the designated slot at the bottom front of the RockDock.
Video: A quick start guide demonstrating the initial setup of the roborock Saros 20, including unboxing, dock placement, and power connection.
Nchaji Mbụ na Njikọ Ngwa
Place the robot vacuum onto the RockDock to charge. For first-time use, download the Roborock app and follow the on-screen instructions to connect your device to your home Wi-Fi network (supports both 2.4 GHz and 5 GHz networks).
Video: Instructions on how to connect the roborock Saros 20 to the mobile application for smart control and mapping.
Ihe dị mkpa:
- For optimal mapping, run the robot in "Vacuum Only" mode twice before enabling mopping functions.
- Ensure your phone is on a 2.4GHz or 5GHz mixed Wi-Fi network during setup.
Ntuziaka ọrụ
Ụdị nhicha
The roborock Saros 20 offers various cleaning modes accessible via the Roborock app:
- Naanị oghere: For dry debris on all surfaces.
- Naanị kpochaa: Maka ihicha mmiri n'ala siri ike.
- Vacuum & mop: Ịsachapụ ihe na ihicha ihe n'otu oge.
- Nhicha ahaziri ahazi: Adjust suction power, water flow, and cleaning routes for specific rooms or zones.
Atụmatụ Smart
- AdaptiLift Chassis 3.0: Dynamically adjusts the robot's height to cross thresholds up to 3.46 inches and clean carpets up to 1.18 inches deep. The robot learns and remembers the best strategy for crossing obstacles.
- StarSight Autonomous System 2.0: Advanced 3D ToF sensors and an RGB camera enable precise navigation and obstacle recognition (over 300 types). The robot can detect and avoid small objects and cables.
- DirTect Technology: Identifies different types of messes (dry debris, liquid spills) and automatically adjusts cleaning strategy (boosts suction for dry, switches to mop-focused for liquid).
- FlexiArm Technology: Extends the side brush and mop to reach corners, edges, and under furniture (as low as 3.13 inches) for comprehensive coverage.
- AI-Powered App Control (SmartPlan 3.0): Learns your home layout and routines, optimizes cleaning sequences, and allows for voice control (e.g., "Hello Rocky").
Image: The roborock Saros 20 robot vacuum navigating around various household items on a wooden floor, demonstrating its obstacle avoidance capabilities.
Image: The roborock Saros 20 robot vacuum extending its side brush to clean along a wall and into a corner, highlighting its edge cleaning feature.
Nlekọta
Regular maintenance ensures optimal performance and extends the lifespan of your roborock Saros 20.
RockDock Maintenance
- Tankị mmiri ruru unyi efu: When the dirty water tank is full, remove it, empty the contents, rinse thoroughly, and securely close before reinstalling.
- Refill Clean Water Tank: Remove the clean water tank, fill with clean water, and securely close before reinstalling.
- Replace Dust Bag: When the dust bag is full, open the front panel, remove the old dust bag (the carrying handle will seal it), wipe the filter, and insert a new disposable dust bag securely.
- Clean Cleaning Tray: Remove the cleaning tray from the dock, rinse it clean, and wipe it dry before reinstalling.
- Clean Charging Contacts and Dock Location Beacon: Use a dry, soft cloth to wipe these components.
Video: A detailed guide on how to clean and maintain the RockDock of the roborock Saros 20, including emptying tanks and replacing the dust bag.
Robot Vacuum Maintenance
- Clean Dustbin and Filter: Remove the top cover, take out the dustbin, open the filter cover, remove the washable filter, and rinse both the dustbin and filter with water. Air-dry for at least 24 hours before reinstalling. (Do not use a brush or your fingers on the filter).
- Paadị Mop Dị Ọcha: Remove the mop pads from the robot. Clean them with water and air-dry.
- Clean Side Brushes: Remove the side brushes (using a screwdriver if necessary), clean any tangled hair or debris, and reinstall.
- Clean Omni-directional Wheel: Remove the omni-directional wheel, clean any tangled hair or debris, rinse with water, air-dry, and reinstall.
- Clean Main Brushes: Remove the main brush cover, remove the main brushes, clean any tangled hair or debris, wipe the main wheels, and reinstall the brushes and cover ensuring correct fitting.
Video: Instructions on how to maintain the roborock Saros 20 robot vacuum, covering cleaning of the dustbin, filters, brushes, and wheels.
Nchọpụta nsogbu
If you encounter issues with your roborock Saros 20, refer to the following common solutions:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Robot not turning on. | Ọkwa batrị dị ala. | Place the robot on the RockDock to charge. |
| Robot na-arapara ọtụtụ oge. | Obstacles (cables, small items) or high thresholds. | Clear the area of obstacles. Ensure AdaptiLift Chassis 3.0 is enabled in the app for high thresholds. |
| Arụmọrụ nhicha na-adịghị mma. | Clogged brushes/filters, full dustbin, or dirty mop pads. | Clean/replace brushes and filters. Empty dustbin. Clean mop pads. |
| Mop pads detaching during cleaning. | Improper installation or worn-out pads. | Ensure mop pads are securely attached. Replace if worn. |
| Nsogbu njikọ ngwa. | Incorrect Wi-Fi password, wrong network band, or robot not in pairing mode. | Ensure correct Wi-Fi credentials. Check phone is on 2.4/5GHz mixed network. Reset Wi-Fi on robot (press Power and Dock buttons simultaneously for 3 seconds). |
For more detailed troubleshooting, please refer to the Roborock app or the official Roborock websaịtị.
Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Ụdị | roborock |
| Aha Nlereanya | Roborock Saros 20 |
| Ike imi | 36,000 Pa |
| Obstacle Crossing | Up to 3.46 inches (double-layer threshold) |
| Carpet Cleaning Depth | Ruo 1.18 sentimita asatọ |
| Ogologo Robọt | 3.14 inches (Ultra Slim) |
| Mop Washing Temperature | 212°F (Hot Water Wash) |
| Mop Drying Temperature | 131°F (Hot Air Drying) |
| Dust Emptying Interval | Up to 65 days (auto dust emptying) |
| Sistemụ igodo | StarSight Autonomous System 2.0 (3D ToF sensors, RGB camera) |
| Obstacle Recognition | Over 300 types of obstacles |
| Ndụ batrị | 180 nkeji |
| Ọkwa mkpọtụ | 55 decibel |
| Usoro njikwa | App, Push Button, Voice (Amazon Alexa, Google Home, Siri, Matter) |
| Akụkụ ihe (L x W x H) | 15"L x 18.7"W x 19.2"H |
| Ibu Ibu | 27.12 pound |
Akwụkwọ ikike & Nkwado
The roborock Saros 20 comes with a standard manufacturer's warranty. For specific warranty details and to register your product, please visit the official roborock websaịtị.
Atụmatụ Nchedo
Extended protection plans are available for purchase:
- Atụmatụ Nchekwa Afọ 2: One-time payment of $119.99
- Atụmatụ Nchekwa Afọ 3: One-time payment of $159.99
- Nchedo zuru oke: Monthly payment of $16.99 (covers all eligible past and future purchases)
For technical support, troubleshooting assistance, or to inquire about service, please contact roborock customer service through the app or their official websaịtị.