Evenflo Shyft Intuiti Travel System with Revolve180 LiteMax NXT Infant Car Seat Manual

Okwu mmalite

The Evenflo Shyft Intuiti Travel System combines a lightweight, luxury stroller with the innovative Revolve180 LiteMax NXT Rotational Infant Car Seat. This system is designed to provide a smooth ride and convenient functionality for parents, adapting to your child's needs from infancy through toddlerhood.

The stroller features a modular frame that supports multiple modes of use, including infant car seat, toddler seat, and lay-flat carriage. It boasts all-wheel suspension and high-traction rubber tires for superior maneuverability. The Revolve180 LiteMax NXT Infant Car Seat is designed for infants weighing 3 to 30 lbs and measuring 15.7 to 32 inches, offering a unique 180-degree rotation for easy access.

Figure 1: The Evenflo Shyft Intuiti Travel System offers six modes of use, adapting from infant car seat to toddler seat and lay-flat carriage, facing either parent or forward.

Melite

Mgbakọ stroller

1. Unfold the stroller frame by releasing usoro mkpọchi.
2. Attach the wheels by pushing them into the designated slots until they click securely.
3. Install the seat unit or car seat adapter onto the frame. Ensure it is properly latched.
4. Adjust the handlebar to your preferred height by pressing the adjustment buttons.

Infant Car Seat Installation (Vehicle)

The Revolve180 LiteMax NXT Infant Car Seat features the LockStrong™ belt tensioning system for secure installation. Always refer to the full car seat manual for detailed, step-by-step installation instructions and vehicle-specific guidance.

1. Debe ntọala oche ụgbọala ahụ n'oche ụgbọala ahụ.
2. Open the LockStrong™ tensioning arm and route the vehicle seat belt through the designated belt path.
3. Buckle the vehicle seat belt and remove all slack.
4. Close the LockStrong™ tensioning arm to tighten the belt for a secure fit.
5. Verify the installation by checking for less than one inch of movement at the belt path.

Operating the Stroller

Na-edozi ogwe aka

The stroller features a 3-position articulated leatherette handlebar. Press the buttons on either side of the handlebar to adjust its height to a comfortable pushing position.

Figure 2: The stroller's handlebar can be adjusted to three different positions for ergonomic comfort.

Seat Recline and Conversion

The modular seat can be reclined to multiple positions, including a lay-flat carriage mode suitable for newborns. To recline, locate the recline mechanism on the back of the seat. To convert to carriage mode, fully recline the seat and adjust the footrest. The seat can also be reversed to face the parent or face forward.

Sistemụ breeki

The stroller is equipped with linked brakes that lock both rear wheels simultaneously. To engage the brakes, press down on the brake pedal located near the rear wheels. To release, lift the pedal.

Mgbanwe Canopy

The height-adjustable UPF 50+ canopy provides ample sun protection. Adjust the canopy by sliding it along the frame to accommodate your child's height.

Nka nchekwa

An extra-large storage basket is located beneath the seat, providing convenient space for your essentials.

Figure 3: The extra-large storage basket offers ample space for carrying baby essentials.

Operating the Revolve180 LiteMax NXT Infant Car Seat

Ntugharị ogo 180

The Revolve180 LiteMax NXT Infant Car Seat features a one-hand, 180-degree rotation mechanism, making it easier to place your child into and remove them from the car seat. To rotate, ensure the car seat is not in motion and follow the instructions in the full manual to unlock and swivel the seat.

Figure 4: The Revolve180 LiteMax NXT Infant Car Seat rotates 180 degrees for convenient loading and unloading.

Ndozi eriri

The car seat features a no-rethread harness system, allowing for easy adjustment of the harness height as your child grows without needing to re-thread the straps.

Nlekọta

Ntuziaka nhicha

• Akwa: The seat and canopy fabrics (25% Cotton, 25% Polyester, 25% Polypropylene) are designed to be easy to clean. Refer to the product label for specific washing instructions. Typically, machine wash cold on a delicate cycle and tumble dry low.
• Frame: Enwere ike iji mgbasa ozi hichaa etiti igwe ahụ dị ọchaamp akwa na ncha dị nro.
• Wheel: The EVA tire material can be cleaned with water and mild soap. Regularly check wheels for debris and ensure smooth rotation.

Nchekwa

When not in use, store the travel system in a dry, cool place away from direct sunlight to prevent material degradation.

Nchọpụta nsogbu

Okwu izugbe

• Stroller anaghị apịaji/na-atụgharị nke ọma: Ensure all locking mechanisms are disengaged and the seat is in the correct position for folding. Check for any obstructions.
• Ụkwụ anaghị atụgharị n'efu: Inspect for debris (e.g., dirt, hair) caught in the wheel axles. Clean as necessary.
• Car seat not rotating: Ensure the car seat is properly installed in the base and the rotation release lever is fully engaged.

For more detailed troubleshooting or issues not listed here, please consult the comprehensive user manual included with your product or contact Evenflo customer support.

Nkọwapụta

Akwụkwọ ikike na nkwado

Akwụkwọ ikike nke onye nrụpụta

The Evenflo Shyft Intuiti Travel System comes with a 90-day limited manufacturer's warranty. Please retain your proof of purchase for warranty claims.

Nkwado ndị ahịa

For assistance with product installation, troubleshooting, or any other inquiries, Evenflo offers support through their ParentLink® Consumer Care Team. You can find contact information and resources on the official Evenflo websaịtị.

Evenflo also provides live video support with certified car seat safety technicians to assist with proper vehicle installation, ensuring you can drive with confidence.

Gaa leta Ụlọ Ahịa Evenflo dị na Amazon maka ozi ndị ọzọ na ngwaahịa.