GRAFJALLET Side Table Instruction Manual

Okwu mmalite

This manual provides detailed instructions for the assembly, operation, and maintenance of your GRAFJALLET Side Table. Please read this manual carefully before beginning assembly and retain it for future reference.

The GRAFJALLET Side Table features a bold, industrial-inspired design with robust metal construction and functional details. It is designed for indoor use.

Ozi nchekwa

• Na-agbaso ntuziaka nhazi nke ọma mgbe niile iji hụ na ọ kwụsiri ike ma dịkwa nchebe.
• Ebufeela tebụl.
• Debe obere akụkụ n'ebe ụmụaka nọ n'oge mgbakọ iji gbochie ihe ize ndụ ịkpagbu.
• Ensure all fasteners are securely tightened before use. Periodically check and re-tighten if necessary.
• Ezubere ngwaahịa a maka naanị ime ụlọ.

Ihe ngwugwu

Verify that all components are present before starting assembly. The package contains one unit of the GRAFJALLET Side Table.

• Top panel (Particleboard, Paper foil, Plastic edging)
• Frame components (Steel, Epoxy/polyester powder coating)
• Side panels (Steel, Epoxy/polyester powder coating)
• Shelf (Steel, Epoxy/polyester powder coating)
• Bottom panel (Steel, Epoxy/polyester powder coating)
• Door (Steel, Epoxy/polyester powder coating)
• Ụkwụ na-agbanwe agbanwe
• All necessary fasteners and fittings

Package dimensions: Width: 42 cm, Height: 8 cm, Length: 60 cm. Total weight: 8.52 kg.

Ntọala na Mgbakọ

Assembly is required for this product. Please follow the visual instructions provided with your product packaging for detailed step-by-step guidance. Below are general tips:

1. Wepu akụrụngwa: Jiri nlezianya wepụ akụkụ niile na nkwakọ ngwaahịa ma dobe ha n'elu dị ọcha ma dị nro iji gbochie ncha.
2. Chọpụta akụkụ: Match each component with the parts list in your product's assembly diagram.
3. Mkpọkọta Frame: Begin by assembling the main frame structure using the provided fasteners. Ensure all connections are snug but do not overtighten until the entire frame is assembled.
4. Install Panels and Shelf: Attach the side panels, bottom panel, and shelf to the frame as indicated in the assembly guide.
5. Tinye Ọnụ Ụzọ: The door can be mounted to open either to the right or to the left. Choose your preferred orientation and attach the door using the hinges and handle provided.
6. Tinye Ogwe Elu: Chekwaa panel nke dị n'elu na nhazi a gbakọtara.
7. Hazie Ụkwụ: Screw in the adjustable feet to the bottom of the table legs. These feet allow you to level the table on uneven surfaces.
8. Mmechi ikpeazụ: Once all parts are in place, go back and securely tighten all fasteners.

Image: Fully assembled GRAFJALLET Side Table. This image illustrates the final appearance of the product after successful assembly.

Ntuziaka ọrụ

The GRAFJALLET Side Table is designed for straightforward use.

• Gbazi Elu: The table is equipped with adjustable feet. To level the table or slightly adjust its height, rotate the feet clockwise or counter-clockwise until the desired stability and height are achieved.
• Ọrụ Ọnụ Ụzọ: The cabinet door can be opened by pulling the handle. Ensure the door closes completely to keep contents secure and dust-free.
• Nchekwa: Utilize the open shelf and the enclosed cabinet for storing various items.

Nlekọta

Proper care will help maintain the appearance and longevity of your side table.

• Nhicha: Jiri akwa hichaa tebụl dị ọcha dampjiri ncha dị nro mee ya.
• ihicha: Always wipe dry with a clean, dry cloth immediately after cleaning to prevent water spots or damage.
• Zere kemịkalụ siri ike: Do not use abrasive cleaners, strong solvents, or harsh chemicals as they may damage the finish.
• Nlele anya mgbe niile: Na-elele skru niile na ihe dabara adaba iji hụ na ha kwụsiri ike. Tinyegharịa ọzọ ma ọ dị mkpa.

Nchọpụta nsogbu

If you encounter any issues with your GRAFJALLET Side Table, consider the following common solutions:

• Okpokoro osisi: Check if the adjustable feet are properly leveled. Rotate them to find a stable position. Ensure all assembly screws are tightened.
• Nhazighị Ụzọ: If the door does not close properly or appears misaligned, check the hinge connections. You may need to slightly adjust the hinges or re-tighten their screws.
• Akụkụ na-efu: If any parts were missing upon unboxing, please contact the retailer or manufacturer's customer service with your product model number and a description of the missing part.

Nkọwapụta

Akwụkwọ ikike na nkwado

For information regarding product warranty, returns, or technical support, please refer to the warranty card included with your purchase or visit the official Ikea website. You may also contact the retailer from whom you purchased the product.

When contacting support, please have your model number (405.702.20) and proof of purchase readily available.