Sharp GX-BT190 Crystal Clear Series Portable Bluetooth Speaker User Manual

Okwu mmalite

Daalụ maka ịzụrụasing the Sharp GX-BT190 Crystal Clear Series Portable Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. Please read it thoroughly before use to ensure optimal performance and longevity of your device.

Image: The Sharp GX-BT190 portable Bluetooth speaker, showcasing its illuminated ring and robust design, surrounded by a light mist.

Kedu ihe dị na Igbe ahụ

Gbaa mbọ hụ na ihe niile dị mgbe ị na-ewepụ igbe:

• Sharp GX-BT190 Bluetooth Speaker
• Lanyard (for easy carrying)
• USB USB USB (Ụdị-C)
• Akwụkwọ ntuziaka (akwụkwọ a)

Ngwaahịa gafereview

The Sharp GX-BT190 is designed for portability and durability, featuring intuitive controls and a robust build.

Foto: Ihu kpọmkwem view of the Sharp GX-BT190 speaker, highlighting the central Sharp logo and the surrounding blue LED mood light.

Akụkụ ndị bụ isi:

• IP67 anaghị egbochi mmiri na uzuzu: Designed to withstand immersion in water and protect against dust, allowing it to float.
• Ndụ batrị nke awa 15: Extended playtime for continuous music enjoyment.
• 6 LED Mood Light Modes: Dynamic lighting effects that synchronize with your music.
• Ezi ikuku stereo (TWS) ijikọ: Connect two GX-BT190 speakers for an enhanced stereo sound experience.
• Oku na-anaghị aka: Igwe okwu arụnyere n'ime ya maka njikwa oku dị mfe.
• Ebube dị obere: Lightweight (8 ounces) with an included lanyard for easy transport.

Melite

1. gingchaji Okwu Okwu

Before first use, fully charge the speaker. A full charge takes approximately 3-4 hours.

1. Locate the charging port, usually protected by a waterproof flap.
2. Open the flap and connect the supplied USB charging cable to the speaker's charging port.
3. Jikọọ nsọtụ nke ọzọ nke eriri USB na ihe nkwụnye ọkụ USB (anaghị etinye ya) ma ọ bụ ọdụ ụgbọ USB nke kọmputa.
4. Ọkụ ihe ngosi chaja ga-enwu. Ọ ga-agbanyụ ma ọ bụ gbanwee agba ozugbo chajịchara ya nke ọma.

2. Gbanyụọ / gbanyụọ

• Iji gbanye: Press and hold the Power button for approximately 2-3 seconds until you hear an audible prompt and the LED lights activate.
• Iji gbanyụọ: Press and hold the Power button again for approximately 2-3 seconds until you hear an audible prompt and the LED lights turn off.

3. Njikọ Bluetooth

Connect your Sharp GX-BT190 speaker to your Bluetooth-enabled device.

Image: A hand holding the Sharp GX-BT190 speaker, positioned next to a smartphone screen showing its Bluetooth settings, illustrating the pairing process.

1. Ensure the speaker is powered on and in pairing mode (the LED indicator will typically flash rapidly).
2. On your smartphone, tablet, or other Bluetooth device, go to the Bluetooth settings menu.
3. Chọọ maka available devices. You should see "SHARP GX-BT190" in the list.
4. Select "SHARP GX-BT190" to connect. Once connected, you will hear a confirmation sound, and the LED indicator will typically stop flashing and remain solid.
5. Ọkà okwu ahụ ga-anwa ijikọghachi na ngwaọrụ ejikọtara ikpeazụ ozugbo mgbe agbanyere ya.

4. Ezi Ikuku Stereo (TWS) Pairing

For an immersive stereo experience, you can pair two Sharp GX-BT190 speakers together.

1. Ensure both GX-BT190 speakers are powered on and not connected to any Bluetooth device.
2. On one of the speakers (this will be your primary speaker), press and hold the TWS button (refer to speaker diagram if available, otherwise assume a dedicated button or a combination).
3. Onye ọkà okwu mbụ ga-achọ ọkà okwu nke abụọ. Ozugbo ejikọtara ya, ị ga-anụ ụda nkwenye.
4. Now, connect your Bluetooth device to the primary speaker as described in the "Bluetooth Pairing" section. Both speakers will play audio in stereo.
5. Iji kwụpụ TWS, pịa ma jide bọtịnụ TWS na nke ọ bụla n'ime okwu okwu.

Onye na-arụ ọrụ

1. Nghaghachi egwu

• Gwuo/kwụsịtụ: Pịa bọtịnụ Play/kwụsịtụ otu ugboro ka ịkpọọ ma ọ bụ kwụsịtụ egwu.
• Elu elu/ala: Press the Volume + button to increase volume, and the Volume - button to decrease volume.
• Track na-esote: Press and hold the Volume + button to skip to the next track.
• Gara aga Track: Press and hold the Volume - button to go to the previous track.

2. Oku na-enweghị aka

Mgbe ejikọtara ya na ekwentị mkpanaaka gị, enwere ike iji ọkà okwu ahụ maka oku na-enweghị aka.

• Oku azaa: Press the Play/Pause button once when an incoming call rings.
• Oku ngwụcha: Pịa bọtịnụ Play/kwụsịtụ otu ugboro mgbe oku na-aga ka ịkwụsị ya.
• Jụ oku: Pịa ma jide bọtịnụ Play/Pause maka sekọnd abụọ mgbe oku na-abata kụrụ.

3. LED Mood Lights

The speaker features 6 different LED mood light modes.

• Gbanwee ụkpụrụ: Press the Light Mode button (or a dedicated button, if available) to cycle through the different light effects.
• Gbanyụọ ọkụ: Continue pressing the Light Mode button until the lights turn off, or press and hold the button for 2 seconds.

4. Waterproof and Floating Functionality

Image: The Sharp GX-BT190 speaker covered in water droplets, demonstrating its IP67 waterproof rating and suitability for use near water.

The GX-BT190 is IP67 rated, meaning it is protected against dust ingress and can withstand immersion in water up to 1 meter for 30 minutes. It is also designed to float on water.

• Ensure the charging port flap is securely closed before exposing the speaker to water.
• Do not submerge the speaker for extended periods or beyond the specified depth.
• After exposure to water, wipe the speaker dry with a soft cloth before charging.

Nlekọta

1. Nhicha

• Jiri nwayọ hichaa ọkà okwu, damp cloth. Do not use abrasive cleaners, alcohol, or chemical solvents.
• Ensure the charging port is dry before connecting any cables.

2. Nchekwa

• Chekwaa ọkà okwu n'ebe dị jụụ, kpọrọ nkụ na-adịghị na ìhè anyanwụ kpọmkwem na oke okpomọkụ.
• Ọ bụrụ na ị na-echekwa ya ruo ogologo oge, chajie batrị ahụ ruo ihe dịka 50% kwa ọnwa ole na ole iji chekwaa ahụike batrị.

3. Nlekọta batrị

• Zere ịchaji batrị ugboro ugboro.
• Ewepụla batrị ahụ ka ọ bụrụ oke okpomọkụ ma ọ bụ oyi.

Nchọpụta nsogbu

Nkọwapụta

Image: The Sharp GX-BT190 speaker displayed next to a smartphone, with measurements indicating its compact size of approximately 3.5 inches wide and 2.9 inches high.

Akwụkwọ ikike na nkwado

Ozi akwụkwọ ikike

The Sharp GX-BT190 speaker comes with a 1-afọ akwụkwọ ikike site na ụbọchị azụrụ ya. Akwụkwọ ikike a na-ekpuchi ntụpọ nrụpụta na ọrụ aka n'oge ojiji nkịtị. Ọ naghị ekpuchi mmebi sitere na ojiji na-ezighị ezi, ihe mberede, mgbanwe na-akwadoghị, ma ọ bụ mmebi nkịtị.

Maka nkwupụta akwụkwọ ikike, biko jigide ihe akaebe nke ịzụrụ.

Nkwado ndị ahịa

If you encounter any issues or have questions regarding your Sharp GX-BT190 speaker, please contact Sharp customer support. Refer to the official Sharp websaịtị ma ọ bụ nkwakọ ngwaahịa gị maka ozi kọntaktị kachasị ọhụrụ.

• Tupu ịkpọtụrụ nkwado, biko regharịaview ngalaba nchọpụta nsogbu nke akwụkwọ ntuziaka a.
• Have your product model number (GX-BT190) and proof of purchase ready.