JEYI I9-Seal

JEYI I9-Seal M.2 NVMe SSD Enclosure User Manual

Model: I9-Seal

Okwu mmalite

This manual provides comprehensive instructions for the installation, operation, and maintenance of your JEYI I9-Seal M.2 NVMe SSD Enclosure. This device converts an NVMe M.2 solid-state drive into a portable external storage solution with high-speed USB 3.2 Gen 2 connectivity.

Ihe ngwugwu

Biko chọpụta na agụnyere ihe niile edepụtara n'okpuru na ngwugwu gị:

JEYI M.2 NVMe SSD Enclosure
Ihe mkpuchi ọkụ
Screwdriver
USB-A to USB-C Cable (10Gbps)
USB-C to USB-C Cable (10Gbps)
Lanyard

JEYI I9-Seal M.2 NVMe SSD Enclosure package contents — Image: Contents of the JEYI I9-Seal M.2 NVMe SSD Enclosure package, showing the enclosure, two cables, thermal pads, a screwdriver, and a lanyard.

Ntuziaka nhazi

Follow these steps to install your NVMe M.2 SSD into the JEYI I9-Seal enclosure:

Kwadebe Ihe Mkpuchi ahụ: Gently slide open the enclosure to reveal the internal PCB.
Tinye pad thermal: Peel off the protective films from both sides of a thermal pad and carefully place it onto the NVMe SSD chip area. This aids in heat dissipation.
Insert NVMe SSD: Align your NVMe M.2 SSD (2280 form factor only) with the M-Key slot on the PCB. Insert the SSD firmly but gently into the slot at an angle.
Chekwaa SSD: Once inserted, gently push down the SSD and secure it with the provided screw using the included screwdriver. Ensure the SSD is flat and securely fastened.
Mechie ihe mkpuchi ahụ: Carefully slide the enclosure cover back into place until it clicks securely.

Gbawara view of JEYI I9-Seal M.2 NVMe SSD Enclosure showing internal components and thermal pad placement — Image: An exploded diagram illustrating the internal structure of the enclosure, including the aluminum alloy case, heat dissipation shell, thermal pad, and screw, demonstrating how to assemble the SSD within the enclosure.

Diagram showing compatibility with M.2 2280 NVMe SSDs only — Image: A visual guide indicating that the enclosure is compatible exclusively with M.2 2280 NVMe SSDs, with other sizes (2230, 2242, 2260) marked as incompatible.

Ntuziaka ọrụ

Once your NVMe SSD is securely installed, connect the enclosure to your device:

Jikọọ na ngwaọrụ: Use either the provided USB-C to USB-C cable or the USB-A to USB-C cable to connect the enclosure to a compatible USB port on your computer, smartphone, tablet, or game console.
Ihe ngosi ike: A small LED indicator on the enclosure will illuminate, signifying that the device is powered on and connected.
Disk Recognition: Your operating system (Windows, macOS, Linux, Android, iOS) should automatically detect the new storage device. If it's a new SSD, you may need to initialize and format it through Disk Management (Windows) or Disk Utility (macOS) before use.
Nyefee data: You can now perform data backup, file transfers, disk upgrades, data recovery, or use it for storage expansion. The enclosure supports USB 3.2 Gen 2 speeds up to 10Gbps.

JEYI I9-Seal M.2 NVMe SSD Enclosure connected to various devices like laptop, smartphone, and tablet — Image: The JEYI I9-Seal enclosure connected to a laptop, smartphone, and tablet, demonstrating its wide compatibility with Windows, Linux, and Mac OS 8.0 and above systems, including Thunderbolt compatibility.

Comparison of USB data transfer speeds, highlighting 10Gbps for USB 3.2 Gen 2 — Image: A graphic illustrating data transfer speeds, showing USB 2.0 at 480Mbps, USB 3.0 (USB 3.2 Gen 1) at 5Gbps, and USB 3.1 (USB 3.2 Gen 2) at 10Gbps, emphasizing the enclosure's high-speed capability for NVMe drives.

Nlekọta

To ensure optimal performance and longevity of your JEYI I9-Seal enclosure:

Njikwa okpomọkụ: Aluminom casing and thermal pads are designed for efficient heat dissipation. During prolonged high-speed data transfers, the enclosure may become warm to the touch. This is normal and indicates effective heat transfer from the SSD.
Nhicha: Jiri akwa dị nro ma kpọọ nkụ hichaa mpụta nke ogige ahụ. Zere iji ihe nhicha mmiri ma ọ bụ ihe mgbaze.
Nchekwa: Mgbe ejighị ya mee ihe, chekwaa ogige ahụ n'ebe dị jụụ, kpọrọ nkụ na-adịghị na ìhè anyanwụ kpọmkwem na oke okpomọkụ.
Nlekọta USB: Handle the USB cables carefully. Avoid sharp bends or excessive pulling to prevent damage.

Nchọpụta nsogbu

Nsogbu	Ihe nwere ike ime	Ngwọta
Kọmputa ahụghị ihe mkpuchi ahụ.	Njikọ eriri adịghị atọ ụtọ. Awụnyebeghị SSD nke ọma. Edebeghị / hazie SSD. Ọdụ ụgbọ mmiri ma ọ bụ eriri USB ezughị oke.	Gbaa mbọ hụ na ejikọrọ eriri na nchekwa. Re-open enclosure and verify SSD is seated correctly and screwed in. Check Disk Management (Windows) or Disk Utility (macOS) to initialize and format the SSD. Gbalịa ọdụ ụgbọ mmiri ma ọ bụ eriri USB dị iche.
Ọsọ mbufe data dị nwayọ.	Connected to a slower USB port (e.g., USB 2.0). Thermal throttling due to high temperature. Oke arụmọrụ SSD.	Connect to a USB 3.2 Gen 2 (10Gbps) compatible port. Ensure thermal pads are correctly installed. Allow the enclosure to cool if it becomes excessively hot. Verify your NVMe SSD's rated speed.
Enclosure gets very hot.	Normal operation during heavy data transfer. Ineffective thermal pad contact.	This is expected as the aluminum casing dissipates heat. Ensure thermal pads are correctly positioned and making good contact with the SSD and enclosure.

Nkọwapụta

Njirimara	Nkọwa
Nlereanya	I9-Seal
Ụdị	JEYI
Ngwaọrụ Akụrụngwa	USB 3.2 Gen 2 (USB-C)
Ọnụego mbufe data	Ruo 10 Gbps
Ụdị SSD dakọtara	NVMe M.2 (PCI-E M-Key)
Supported SSD Form Factor	2280 (80mm) only
Oke Nchekwa Ike	4 TB
Chipset	JMS583 A3
Atụmatụ	UASP Support, TRIM Support, Win to Go (WTG) Support
Ihe onwunwe	Aluminom Alloy
Agba	Ọlaọcha
Akụkụ ngwaahịa	4.06 x 1.02 x 0.39 sentimita (103 x 26 x 10 mm)
Ibu Ibu	0.317 ounce (9 grams)
Sistemu eji arụ ọrụ dakọtara	Windows, macOS, Linux, iOS, gam akporo

Diagram of the JMS583 A3 master chip — Image: A detailed illustration of the JMS583 A3 master chip, which is integrated into the enclosure for stable and high-speed data transmission up to 10Gbps.

Akwụkwọ ikike na nkwado

For warranty information or technical support, please refer to the official JEYI websaịtị ma ọ bụ kpọtụrụ ndị ọrụ ahịa ha ozugbo. A na-enye nkọwa gbasara oge nkwa na ọwa nkwado kpọmkwem na akwụkwọ ịzụrụ ihe gị ma ọ bụ na nke onye nrụpụta websaịtị.

Onye nrụpụta: JEYI

Websaịtị: Visit the JEYI Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.