SF Quartz Analog Digital Watch NT77118PP01W User Manual

1. Okwu mmalite

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your SF Quartz Analog Digital Watch, model NT77118PP01W. Please read this manual thoroughly to ensure proper use and care of your watch.

2. Akụrụngwa Ngwaahịa

• Ngosipụta abụọ: Combines analog hands with a digital display for versatile timekeeping.
• Ihe owuwu na-adịgide adịgide: Features a rugged case and a sturdy Polyurethane (PU) strap designed for everyday and outdoor use.
• Ọrụ agbakwunyere: Includes an alarm, stopwatch, and backlight for enhanced utility.
• Nguzogide mmiri: Water resistant up to 30 meters (3 ATM), suitable for splashes or brief immersion, but not for swimming or diving.

3. Lelee akụrụngwa

Mara ihe ndị bụ isi dị na elekere gị:

Foto 3.1: Akụkụ view of the watch, highlighting the 'LIGHT', 'MODE', 'ADJUST', and 'RESET' buttons, along with the analog crown.

• Analog Crown: Used for setting the analog time.
• Bọtịnụ ọkụ: Na-eme ka ìhè azụ maka ngosipụta dijitalụ rụọ ọrụ.
• Bọtịnụ MODE: Cycles through different digital modes (Time, Alarm, Stopwatch).
• Bọtịnụ gbanwee: Used to enter and confirm settings in various modes.
• Bọtịnụ Tọgharia: Used to change values or reset functions within settings.

4. Nhazi ntuziaka

4.1 Ịtọ oge Analog

1. Pull the analog crown (located on the right side of the watch) outwards.
2. Tụgharịa okpueze iji bugharịa aka elekere na nkeji gaa n'oge achọrọ.
3. Push the crown back in to secure the analog time setting.

4.2 Ịtọ Oge na Ụbọchị Dijitalụ

1. Pịa MODE button repeatedly until the digital time display flashes, indicating it is in setting mode.
2. Pịa Tụgharịa button to cycle through the values (seconds, minutes, hours, date, month, day).
3. Jiri ihe KWESỊRỊ button to increase the selected value. Hold KWESỊRỊ iji kwalite uru ahụ ngwa ngwa.
4. Ozugbo ntọala niile ziri ezi, pịa bọtịnụ MODE bọtịnụ ka ịpụ na ọnọdụ ntọala.

5. Ntuziaka ọrụ

5.1 Iji ọkụ azụ

Pịa ÌHÈ button (top left) to illuminate the digital display for a few seconds. This is useful in low-light conditions.

5.2 Using the Alarm Function

1. Pịa MODE bọtịnụ ruo mgbe oge mkpu ahụ ga-apụta.
2. Pịa KWESỊRỊ button to enter alarm setting mode (the hour digits will flash).
3. Jiri ihe Tụgharịa bọtịnụ iji họrọ n'etiti ntọala elekere na nkeji.
4. Jiri ihe KWESỊRỊ button to set the desired alarm hour and minute.
5. Pịa MODE bọtịnụ iji pụọ na ntọala mkpu.
6. Iji mee ka mkpu ahụ rụọ ọrụ/gbanyụọ ya, pịa bọtịnụ KWESỊRỊ na Tụgharịa buttons simultaneously in alarm mode. An alarm icon will appear/disappear.

5.3 Iji elekere nkwụsị

1. Pịa MODE button until the stopwatch display appears (usually showing 00:00:00).
2. Pịa KWESỊRỊ bọtịnụ iji malite elekere nkwụsị.
3. Pịa KWESỊRỊ bọtịnụ ọzọ iji kwụsịtụ elekere nkwụsị.
4. Pịa Tụgharịa button while paused to reset the stopwatch to zero.
5. Iji maliteghachi site na steeti kwụsịtụrụ, pịa bọtịnụ KWESỊRỊ bọtịnụ.

6. Nlekọta

6.1 Na-ehicha elekere gị

Jiri akwa dị nro hichaa akpa nche na eriri mgbe niile. Maka unyi isi ike, ntakịrị damp cloth can be used, followed by immediate drying. Avoid using chemical cleaners or solvents, as these can damage the watch materials.

6.2 Mmiri Nguzogide

Your watch is water resistant up to 30 meters (3 ATM). This means it can withstand splashes, rain, or brief immersion in water. However, it is ọ bụghị suitable for showering, swimming, diving, or any activities involving high water pressure or prolonged submersion. Do not operate any buttons while the watch is wet or submerged.

6.3 nnọchi batrị

The watch is powered by a Lithium Polymer battery. When the digital display becomes dim or the watch stops functioning, the battery may need replacement. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and water resistance.

Ọgụgụ 6.1: N'azụ view of the watch, showing the stainless steel case back. This area should only be opened by a professional for battery replacement or service.

7. Nchọpụta nsogbu

• Analog hands not moving: Check if the analog crown is pushed in completely. If it is, the battery may be low or depleted.
• Ngosipụta dijitalụ enweghị oghere ma ọ bụ gbagọrọ agbagọ: Batrị ahụ nwere ike ịdị ala ma ọ bụ gwụchaa. Dochie batrị ahụ.
• Oge na-ezighi ezi egosiri: Refer to Section 4.1 and 4.2 to reset the analog and digital time.
• Mmiri n'ime elekere: Immediately take the watch to a qualified service center. Do not attempt to open it yourself.

8. Nkọwapụta

Foto 8.1: N'ihu view of the SF Quartz Analog Digital Watch, model NT77118PP01W.

9. Akwụkwọ ikike na nkwado

9.1 Amụma akwụkwọ ikike

This SF watch comes with a Akwụkwọ ikike nrụpụta ọnwa 6 on manufacturing defects. To avail warranty service, you must present your original purchase invoice at any authorized Titan Service Center. No separate warranty card is required.

9.2 Ozi kọntaktị

For further details or service-related inquiries, please contact Titan India customer support:

• Nọmba na-anaghị akwụ ụgwọ: 1800-266-0123 (Available 10 AM to 7 PM, all days of the week)
• Email: customercare@titan.co.in
• Onye nrụpụta: Titan Company Limited, Sipcot Industrial Complex, Hosur, Tamil Nadu - 635129