Anjou 500ml Essential Oil Diffuser User Manual

Okwu mmalite

Thank you for choosing the Anjou 500ml Essential Oil Diffuser. This device is designed to enhance your environment with soothing aromatherapy and humidification. Featuring a large capacity, quiet operation, and intelligent controls, it provides a consistent and pleasant experience. Please read this manual thoroughly before use to ensure proper operation and maintenance.

Figure 1: Anjou 500ml Essential Oil Diffuser, a sleek white, teardrop-shaped device with control buttons and an LED light strip at its base.

Ngwa ngwaahịa

The Anjou Essential Oil Diffuser package includes the following items:

• 1 x Anjou Essential Oil Diffuser (Model: AJ-AD012)
• 1 x eriri ọkụ AC
• 1 x Folded Measuring Cup
• 1 x Ntuziaka onye ọrụ

Note: The round rubber object found in the bottom of the box is a collapsible cup for filling the diffuser.

Melite

Follow these steps for the initial setup of your diffuser:

1. Debe ihe na-agbasa ihe: Position the diffuser on a flat, stable surface away from direct sunlight or heat sources.
2. Wepu mkpuchi: Gently lift the top cover of the diffuser.
3. Tinye mmiri: Using the provided measuring cup, fill the water tank with clean tap water up to the maximum water level line (500ml). Do not exceed the MAX line.


Figure 2: A transparent view of the Anjou diffuser, emphasizing its 500ml large water capacity, which allows for extended operation times of up to 15 hours.

4. Tinye mmanụ dị mkpa: Add 30-40 drops (approximately 1.5ml) of your preferred essential oil directly into the water tank. The patented OneFill technology ensures consistent scent for 11-15 hours in low mode and 6-10 hours in high mode with a single fill.


Figure 3: An internal cutaway diagram of the Anjou diffuser, illustrating its patented oil flow system designed to create a constant and lasting aroma by efficiently distributing essential oils.

5. Dochie mkpuchi: Tinye mkpuchi elu ahụ n'elu ihe mgbasa ozi ahụ nke ọma.
6. Njikọ Ike: Plug the AC power cord into the diffuser's power input port, then plug the adapter into a standard wall outlet.

Ntuziaka ọrụ

Your Anjou diffuser features intuitive controls for mist and light functions:

Figure 4: A visual representation highlighting the Anjou diffuser's ultra-quiet operation, rated at less than 30dB, making it suitable for bedrooms and quiet environments.

Njikwa alụlụ

• Gbanyụọ/ Gbanyụọ: Pịa bọtịnụ ike (⏻) once to turn on the diffuser. Press again to turn off.
• Gbanwee Ụdị alụlụ: While the diffuser is on, press the power button (⏻) repeatedly to cycle between mist modes:
  • First press: High Mist Mode (6-10 hours run time)
  • Second press: Low Mist Mode (11-15 hours run time)


Figure 5: An image depicting the Anjou diffuser in operation, illustrating the two available mist modes: a high mist setting for stronger diffusion (6-10 hours) and a low mist setting for gentler diffusion (11-15 hours).

• Nịm Oge: Pịa bọtịnụ ngụ oge (◷) repeatedly to set the operating time:
  • 1H (1 hour)
  • 4H (4 hours)
  • 8H (8 hours)
  • ON (Continuous operation until water runs out)
  The diffuser will automatically shut off when the timer expires or when water runs out.

Ikanam Light Control

• Gbanwuo/ Gbanyụọ ọkụ: Pịa bọtịnụ ọkụ (☀) once to turn on the LED light. Press again to turn off.
• Agba okirikiri: With the light on, press the light button (☀) repeatedly to cycle through the 7 available colors.
• Tọọ ihie: Some models allow adjusting brightness. Refer to the specific light button functionality for 100% or 50% brightness options if available.

Figure 6: The Anjou diffuser displaying its control panel with icons for timer settings (1h, 4h, 8h, ON), mist brightness (100%/50%), and power (OFF/ON), along with a colorful LED light spectrum.

Nlekọta

Regular cleaning ensures optimal performance and extends the lifespan of your diffuser. Always unplug the diffuser before cleaning.

Nlekọta kwa ụbọchị

• Wepu mmiri ọ bụla fọdụrụ na tank.
• Jiri ákwà dị nro dị ọcha hichaa ime tankị mmiri ahụ.
• Refill with fresh water for the next use.

Nhicha kwa izu

• Wepụ ihe mgbasa ozi ma wepụ mkpuchi ahụ.
• Wụpụ mmiri ọ bụla fọdụrụ.
• Add 1 tablespoon of white vinegar to the water tank.
• Fill the tank with clean water up to about half capacity.
• Run the diffuser for 10-15 minutes to allow the vinegar to clean the ultrasonic plate.
• Drain the water and wipe the tank thoroughly with a soft cloth.
• Rinse the tank with clean water to remove any vinegar residue.
• Jiri ihe dị nro, d hichaa mpụta nke ihe mgbasa ozi ahụ.amp akwa .

Note: Do not use corrosive detergents or harsh chemicals, as they may damage the diffuser. The BPA-free material is easy to clean.

Nchọpụta nsogbu

Ọ bụrụ na ị na-enwe nsogbu na diffuser gị, biko lelee nsogbu na ngwọta ndị a na-ahụkarị:

Nkọwapụta

Akwụkwọ ikike na nkwado

Anjou products are designed with quality and customer satisfaction in mind. For any questions, concerns, or warranty inquiries regarding your Anjou Essential Oil Diffuser, please contact Anjou customer support. Refer to the contact information provided on the product packaging or the official Anjou websaịtị maka enyemaka.

Biko dowe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike.