JBL GO2 Mini Portable Wireless Bluetooth Speaker User Manual

Okwu mmalite

The JBL GO2 Mini is a full-featured waterproof portable Bluetooth speaker designed to take with you everywhere. Stream music wirelessly via Bluetooth for up to 5 hours of continuous JBL quality sound. Its new IPX7 waterproof design allows music lovers to bring their speaker poolside or to the beach without worry. The GO2 also offers a crystal clear speakerphone experience with its built-in noise-cancelling speakerphone.

Foto: N'ihu view of the JBL GO2 Mini Portable Bluetooth Speaker.

Kedu ihe dị na Igbe ahụ

• 1 x JBL GO2 Speaker
• 1 x Micro USB Cable for charging
• 1 x Ntuziaka mmalite ngwa ngwa
• 1 x Mpempe akwụkwọ nchekwa
• 1 x kaadị ikike

Ngwaahịa gafereview

Familiarize yourself with the buttons and ports on your JBL GO2 speaker.

Foto: Top view of the JBL GO2 Mini speaker, highlighting the control buttons.

Foto: Akụkụ view of the JBL GO2 Mini speaker, showing the Micro USB charging port and 3.5mm audio input port, protected by a waterproof flap.

Bọtịnụ na egosi:

• bọtịnụ ike (⏻): Pịa ka ịgbanwuo ma ọ bụ gbanyụọ ọkà okwu.
• Bọtịnụ Bluetooth (Ⓑ): Pịa ka ịbanye mode mmakọ Bluetooth.
• Bọtịnụ ala ala (-): Pịa ka ibelata olu.
• bọtịnụ elu olu (+): Pịa ka iwelie olu.
• Multifunction Button (▶):
  • Pịa otu ugboro iji kpọọ/kwụsịtụ egwu.
  • Pịa ugboro abụọ ka ịgafe na egwu na-esote.
• Ihe ngosi LED: Na-egosi ọkwa ike, ọkwa nchaji na ọkwa njikọ Bluetooth.

ọdụ ụgbọ mmiri:

• Audio Input (3.5mm): Jikọọ ngwaọrụ ọdịyo mpụga site na iji eriri ọdịyo 3.5mm.
• Micro USB Port: Maka ịchaji ọkà okwu.
• Igwe okwu: Maka oku na-enweghị aka.

Melite

1. gingchaji Okwu Okwu

1. Mepee ihe mkpuchi mmiri na-adịghị amịpụta n'akụkụ ọkà okwu ahụ.
2. Connect the Micro USB cable to the speaker's Micro USB port and the other end to a USB power adapter (not included) or a computer's USB port.
3. Ihe ngosi LED ga-egosi ọkwa nchaji. Ụgwọ zuru ezu na-ewe ihe dị ka awa 2.5.
4. Once fully charged, disconnect the cable and ensure the waterproof flap is securely closed to maintain water resistance.

2. Ịgbanye / gbanyụọ

• Iji gbanye, pịa ⏻ Power Button. The LED indicator will light up.
• Iji gbanyụọ, pịa ma jide ⏻ Power Button until the LED indicator turns off.

3. Njikọ Bluetooth

1. Turn on the JBL GO2 speaker. The LED indicator will flash blue, indicating it's in pairing mode.
2. Na ngwaọrụ Bluetooth gị (ama, mbadamba, wdg), gaa na ntọala Bluetooth.
3. Họrọ "JBL GO2" site na ndepụta ngwaọrụ dị.
4. Once connected, the LED indicator will turn solid blue, and you will hear a confirmation sound.
5. Ọ bụrụ na a kpaliri maka paswọọdụ, tinye "0000".

Ọkà okwu ahụ ga-ejikọghachi na ngwaọrụ ikpeazụ ejikọtara ozugbo mgbe agbanyere ya, ọ bụrụ na ngwaọrụ ahụ dị n'ime oke ma gbanye Bluetooth.

Ntuziaka ọrụ

Egwu Egwu

• Gwuo/kwụsịtụ: Pịa ▶ Multifunction Button once.
• Track na-esote: Pịa ▶ Multifunction Button twice quickly.
• Njikwa olu: Jiri ihe + (Volume Up) and - (Volume Down) buttons on the speaker, or control volume from your connected device.

Ịkpọ oku na-enweghị aka

When connected to your smartphone via Bluetooth, the JBL GO2 can be used as a speakerphone.

• Oku azaa: Pịa ▶ Multifunction Button once.
• Oku ngwụcha: Pịa ▶ Multifunction Button once during a call.
• Jụ oku: Pịa ma jide ▶ Multifunction Button for 2 seconds.
• Gbanwee n'etiti oku: If a second call comes in, press the ▶ Multifunction Button once to answer the new call and put the current call on hold. Press again to switch back.
• Reject Second Call: Pịa ma jide ▶ Multifunction Button for 2 seconds to reject the incoming second call.

Gbanyụọ ike akpaaka

The JBL GO2 will automatically power off after 15 minutes of inactivity (no audio input or button presses) to conserve battery. To reactivate, press the Power Button.

Nlekọta

Ozi Mmiri Na-anaghị Akwado Mmiri (IPX7)

The JBL GO2 is IPX7 waterproof. This means it can be immersed in water up to 1 meter (3 feet) for up to 30 minutes. Ensure the waterproof flap covering the charging port and audio input is securely closed before exposing the speaker to water.

Image: The JBL GO2 Mini speaker partially submerged in water, demonstrating its waterproof capability.

Ihe dị mkpa: Do not charge the speaker if it is wet. Always ensure the ports are completely dry before connecting the charging cable.

Nlekọta batrị

• Avoid exposing the speaker to extremely high temperatures, as this can degrade battery performance.
• Store the speaker in a cool, dry, and well-ventilated place when not in use for extended periods.
• Repeated charging and discharging, even when done correctly, will gradually shorten the usable time of the battery.

Nhicha

Jiri nwayọ hichaa ọkà okwu, damp akwa . Ejila kemịkalụ siri ike ma ọ bụ ihe mkpocha abrasive.

Nchọpụta nsogbu

If you encounter issues not listed here, please refer to the official JBL support websaịtị ma ọ bụ kpọtụrụ ndị ahịa.

Nkọwapụta

Image: The JBL GO2 Mini speaker with its dimensions (width, height, depth) clearly indicated.

Akwụkwọ ikike na nkwado

Ozi akwụkwọ ikike

The JBL GO2 Mini Portable Wireless Bluetooth Speaker comes with a Akwụkwọ ikike nwere okeBiko lee kaadị akwụkwọ ikike dị na ngwugwu ngwaahịa gị maka usoro na ọnọdụ ụfọdụ, gụnyere oge mkpuchi na oke.

Nkwado ndị ahịa

Maka enyemaka ọzọ, nkwado teknụzụ, ma ọ bụ akwụkwọ ikike, biko gaa na nkwado JBL gọọmentị websaịtị ma ọ bụ kpọtụrụ ngalaba ọrụ ndị ahịa ha. Enwere ike ịchọta ozi kọntaktị na JBL websaịtị ma ọ bụ n'ime akwụkwọ ngwaahịa gị.

Ị nwere ike ịchọta ozi ndị ọzọ na akụrụngwa nkwado na Onye ọrụ JBL Websaịtị.