akwụkwọ ntuziaka 43058150 Air Compressor
anko 43058150 Air Compressor

This 12V compressor has been designed for inflating car, caravan, motorcycle tyres, sports and camping equipment. Please read the user instructions carefully and use the compressor only in accordance with these Instructions.

Nchedo nchedo

  • Keep out of the reach of Children.
  • Dispose of the wrapping material. Plastic foils and/ or bags may be dangerous toys for children
  • Check the functionality of the device before each use.
  • Do not exceed the maximum allowable pressure for the inflatable.
  • Never leave the compressor unattended when working.
  • Never use the compressor continuously for more than 5 minutes; let it cool down for 15~30 minutes. The compressor may overheat or get damaged if left running for too long.
  • The gauge reading of pressure is approximate → check the pressure using a calibrated pressure gauge.
  • Use the compressor only with 12V DC (e.g. 12V cigarette lighter socket in the car, 230V AC input / 12V DC output adapter, etc.).
  • Ngwa a abụghị maka ndị mmadụ (gụnyere ụmụaka) nwere ike belata, nke nwere ikike ma ọ bụ ikike ọgụgụ isi, ma ọ bụ enweghị ahụmịhe na ihe ọmụma, belụsọ na enyere ha nlekọta ma ọ bụ ntụzi aka nke onye ọrụ na nchekwa ha.
  • E kwesịrị ilekọta ụmụaka iji hụ na ha anaghị eji ngwa eji egwuri egwu.
  • A ga -enyerịrị ngwa naanị na nchekwa obere voltage kwekọrọ na akara dị na ngwa.

Emecharaview

Emecharaview
Emecharaview

  1. Air hose with Valve nozzle
  2. 12V DC adapter
  3. ON / Gbanyụọ mgba ọkụ
  4. Nrụgide nrụgide
  5. Extension inflate tube
  6. Ọkụ ọkụ
  7. Nozzle accessories

Cheta na: The switch for LED light and air compressor has a different print. See Below.

Switch for LED light

Nka na ụzụ data

Ike Isi Iyi: DC 12 volt Ogologo eriri ikuku 60cm
Iri ugbu a: 15 Ampere Arọ 1.8KGS
Max ikuku ikuku 150PSI akụkụ H13.7 x W23.0 x D9.0 cm
Extension inflate tube: 2 mita USB ogologo 2.6 mita
Duration 10 mins

Iji

Inflating car, caravan, motorcycle tyres with equipment valves:

  1. Clip the valve nozzle (1) onto the tire screw tooth valve. Need the extension tube? -Connect the black pipe with one end of the extension tube, and then connect the air nozzle at the end of the extension tube with the tire screw tooth valve.
  2. Plug the 12 V adapter (2) in the 12V DC cigarette lighter socket in your car.
  3. Press the ON/OFF switch (3), turn the compressor on.
  4. While inflating, watch the gauge (4) closely and stop the motor when the manufacturer’s recommended pressure has been achieved, turn the compressor off.
  5. Unclip the valve nozzle and recheck the pressure using a calibrated pressure gauge.

Inflating other inflatable objects

The adapters supplied in the package have been designed for various purposes (e.g. Inflating balls, mats, etc.)

  1. Choose appropriate accessories (7) and screw into the valve nozzle (1).
  2. Plug the 12V adapter (2) in the 12V DC cigarette lighter socket in your car.
  3. Press the ON/OFF switch (3), turn the compressor on.
  4. While inflating, watch the gauge (4) closely and stop the motor when the manufacturer’s recommended pressure has been achieved, turn the compressor off.
  5. Remove the valve nozzle and the adapter

Nhicha na Nchekwa

  • Clean the device using only a slightly moist cloth. Do not use solvents or harsh detergents.
  • Store the compressor in dry and dust-free environment.

 

Akwụkwọ / akụrụngwa

anko 43058150 Air Compressor [pdf] Akwụkwọ ntuziaka onye ọrụ
43058150, Air Compressor

Hapụ ikwu

Na adreesị email gị agaghị bipụtara.