ifi Go Blu Pocket Rocket Hi-Res Bluetooth DAC User Guide
Power On/Off and Bluetooth format prompt
Long press the power switch to power on/off the GO blu.
Note: press the power switch twice and the voice will prompt you about the Bluetooth format you are currently receiving.
This knob controls:
- Volume control (turn)
- Play/Pause (a short click)
- Skip forward (two short clicks)
- Skip back (three short clicks)
- Wake up voice assistant (long press
Settings and Bluetooth pairing
This button cycles between (Please refer to item 4):
Off > XBass > XSpace > XBass + XSpace (short click) Pairing (long press)
Sound effects and Bluetooth status LED
The LED colour scheme indicates the current sound effects and Bluetooth status of GO blu.
- XBass + XSpace
|Off||Wireless Bluetooth (Connected)|
|Blue (flashing)||Wireless Bluetooth (Awaiting connection)|
|Blue/Red (flashing)||Wireless Bluetooth (Pairing)|
From switch on, the GO blu will blink blue as it searches for a previously paired device. If a stored device is not found, it will automatically enter pairing mode and blink blue/red.
To enter pairing mode, long-press the button until Bluetooth Mode LED flashes blue / red. To pair, look for “GO blu” in the list of available Bluetooth devices on your phone.
The GO blu is able to store up to 8 paired Bluetooth devices.
Balanced 4.4mm headphone output
Connect balanced 4.4mm headphones
S-Balanced 3.5mm headphone output
Connect 3.5mm headphones.
System reset (long press ≥3s).
The USB-C socket isn’t just a charging port, it plays up to 24 bit 96kHz directly from USB input. It will take <40 minutes for a high-powered USB charger to fully charge GO blu. Use the enclosed USB ‘Type A’ to ‘Type C’ cable, smart charger or a regular charger up to 6.3V.
LED for Battery Status
*Battery LED will flash when it is charging
Built-in mic for hands-free calls when paired with your smartphone.
Tip: To wake up your phone’s voice assistant, long-press the multi-function knob.
|Chipset||Qualcomm QCC 5100 Series|
|Input||USB-C/Bluetooth 5.0 ( AAC, SBC, aptX, aptX HD, aptX Adaptive, aptX LL, LDAC, LHDC/HWA Codec)|
|Balanced||245mW @ 32Ω; 5.6V @ 600Ω|
|UnBAL||165mW @ 32Ω; 2.8V @ 600Ω|
|Frequency Response:||20Hz – 45kHz (-3dB)|
|Battery||Lithium-polymer 450mAh approx. ~10 hours|
|Power System:||Charging via USB-C, BC V1.2 compliant up to 1000mA charging current and 6.3 volts|
|Dimensions||55 x 34 x 13 mm
2.2″ x 1.3″ x 0.5”
|Weight||26 g (0.92 oz)|
|Warranty period:||12 months|
|*Specications are subject to change without notice.|
|ifi User Guide|
Go Blu, Pocket Rocket Hi-Res Bluetooth DAC