2515BONEHDPB Bone Conduction Wireless Headphones
3 12 4
5
1 . // 2 . 3 .Type-C 4 . L E D 5 . //
// / 6 .
3
LED power on; 5
LED power off;
BT 3
LED Pairing; BH318 LED5 C o n n e c t e d
/BT / 2 2 2 5 USB LE D
6
Manual Instruction for
Bone Conduction
Wireless Headphones
6
3 12 4
5
1.Power On/ Power Off/ Volume up
2.Volume down 3.Type – C charging port 4.LED indicator 5.Multifunctional
buttons: Pause/ Play/ Answer Phone Call/ End Phone Call/Nxet/ Voice Assistant 6.Microphone
BH318
In the BT connection music playback state, click the multi-function button to pause, and then click the multifunction button to play;
In the incoming call state: click the multifunction button to answer, long press the multi-function button for 2 seconds to reject the call. In the call state, click the multi-function button to hang up
The next song: Double click on the multifunction button In a song: Three clicks multifunction key
BT connection, long press the multifunction button for 2 seconds to enter the voice mode, and long press the button again for 2 seconds to exit Reset: After plugging the charging line, the headphone will be reset and powered off for charging. Clear pairing information: Press the power button and the volume off button for 5 seconds to clear the pairing information in shutdown mode, Red and Blue light blinks 1 second spontaneously Charging: In case of using charging line for charging, connect the headphone with the USB power. During the charging, LED turns red. After charging, the LED turns blue.
Documents / Resources
 |
IFECCO 2515BONEHDPB Bone Conduction Wireless Headphones [pdf] User Guide 2515BONEHDPB, Bone Conduction Wireless Headphones |
