Installation Guide

Desktop Installation

To install the switch for desktop use:

1. Remove the adhesive backing papers from the feet.
2. Attach the feet to the bottom of the switch to prevent it from slipping when placed on a desktop.

Note: This device also supports wall-mounting installation. For detailed information, please refer to the Wall Mounting Guide on the device's support page.

Connection for PoE Switch

For simplicity, the ES210GMP model is used as an example throughout this guide.

Diagram Description: A network setup showing a Router/Gateway connected via LAN/WAN ports to a TP-Link Omada PoE Switch. A DC Power Adapter and AC Power Cord are shown connected to the switch. The switch's PoE+ ports (1-8) are connected to various Powered Devices (PD) such as an IP Camera, an Access Point (AP), and an IP Phone. A Personal Computer (PC) is connected to another port on the switch.

Note:

• The PoE ports can also connect to non-PoE devices, but they will only transmit data.
• The PoE ports shall not be used to charge lithium batteries or devices supplied by lithium batteries.
• Maximum PoE power is 30 W for each PoE port. The total PoE budget is 65 W for ES205GP/ES206GP and 123 W for ES210GMP.
• PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary due to client limitations and environmental factors.

LED Explanation

Connection for Non-PoE Switch

For simplicity, the ES205G model is used as an example throughout this guide.

Diagram Description: A network setup showing a Router/Gateway connected via LAN/WAN ports to a TP-Link Omada Non-PoE Switch. A Power Adapter is shown connected to the switch. A Personal Computer (PC) is connected to one of the Ethernet Ports (1-5) on the switch.

Configuration

The switch supports two configuration methods:

• Standalone Mode: Configure and manage the switch singly.
• Controller Mode: Configure and manage network devices centrally. This is recommended for large-scale networks consisting of multiple devices like access points, switches, and gateways.

Note: When the switch is changed from Standalone Mode to Controller Mode, its configurations will be lost. For details, refer to the related documents on the TP-Link download center: https://www.tp-link.com/support/download/?type=smb.

Method 1: Standalone Mode

In Standalone Mode, use a computer to configure and manage the switch.

Diagram Description: A PC is connected to a TP-Link Omada Switch.

1. To access the management page of the switch, open a web browser and type the switch's IP address in the address field, then press Enter.
   • If the switch obtains an IP address from the DHCP server (typically a router), find the switch's IP address on the DHCP server.
   • If not, use the default IP address 192.168.0.1 to launch the switch's management page.
   Note: Make sure the switch and computer are in the same subnet.
2. Enter admin for both the username and password (in lowercase letters) to log in. The first time you log in, change the password to better protect your network and devices.
3. After a successful login, the main page will appear. You can click the menus on the top and left sides to configure the corresponding functions.

For detailed configurations, refer to the User Guide available on the TP-Link download center: https://www.tp-link.com/support/download/?type=smb.

Method 2: Controller Mode

Choose from the following two types of Omada Controller:

Type 1: Omada Hardware Controller

The Omada Hardware Controller is a good alternative if you do not have a spare PC to run the Omada Software Controller. It needs to be purchased separately. For more details, refer to the Installation Guide of the Omada Hardware Controller.

Diagram Description: A network topology showing a Router/Gateway, a TP-Link Omada Switch, multiple Omada Access Points (EAPs), and client devices. The devices are interconnected, forming a network managed by the Omada Hardware Controller.

Note: Before you start, ensure your devices are powered up and connected according to the topology figure.

• A DHCP server (typically a router with DHCP function enabled) is required to assign IP addresses to the EAPs and clients in your local network.
• The Omada Controller must have network access to your Omada devices (router, switch, and EAPs) to find, adopt, and manage them.

Type 2: Omada Software Controller

On a PC with Windows OS or Linux OS, download the Omada Software Controller from https://www.tp-link.com/support/download/omada-software-controller/. Then run the file and follow the wizard to install and launch the Omada Software Controller. To manage your devices, the Omada Software Controller needs to keep running on your computer.

Diagram Description: A network topology showing a Router/Gateway, a TP-Link Omada Switch, multiple Omada Access Points (EAPs), and client devices. The devices are interconnected, and an Omada Software Controller is shown running on a Host PC, managing the network.

Management Interface Options

Choose from the following two types of Management Interface:

Type 1: Via Web Browser

1. Open the Omada Controller's web page.

• For Omada Software Controller: Launch the Omada Software Controller on your PC. After the initiation process, the controller automatically opens its web page. If not, click "Launch a Browser to Manage the Network".
• For Omada Hardware Controller: The Omada Hardware Controller obtains its IP address from the router's DHCP server. To find its IP address:
  • Find the IP address of your router. Open the command line on your PC and enter ipconfig. In the result list, find the "Default Gateway", which is also the IP address of the router.
  • Launch a web browser and enter the router's IP address. Log into the router's web page (default username and password are 'admin'). Navigate to Network > LAN > DHCP Client List to find the IP address of your controller using its MAC address.
  • Enter the controller's IP address in your browser's address bar to open its web page.

2. On the Omada Controller's page, follow the wizard to complete the quick setup.

3. After quick setup, the login page appears. Enter the username and password you created and click "Log in". You can then further configure the controller.

4. (For Remote Management) You can remotely access and manage your controller via Omada Cloud Service.Note: Before starting, ensure both your controller and your PC can access the internet.

• For Omada Software Controller: Refer to its User Guide.
• For Omada Hardware Controller:
  1. Ensure Cloud Access is enabled on your controller. By default, Cloud Access is enabled. Verify that the Cloud LED is flashing slowly.
  2. Launch a web browser and enter https://omada.tplinkcloud.com. Enter your TP-Link ID and password to log in. Click "+ Add Controller" and select "Hardware Controller" to add your controller.

Type 2: Via Omada App

1. Download the TP-Link Omada App on your mobile device from the App Store or Google Play.

App Store/Google Play Icons Description: Textual representation of app store download buttons: "[Download on the App Store]" and "[Get it on Google Play]". A QR code for the Omada App is also mentioned but excluded.

2. Launch your Omada App and configure the controller at a local or remote site.

• Local Management:
  1. Connect your mobile device to the EAP using the default SSID (format: TP-Link_2.4GHz/5GHz_XXXXXX) printed on the product label.
  2. Launch the Omada App, go to "Local Access", and tap the "+" button in the upper-right corner to add the controller. You can then further configure the controller.
• Remote Management:

  Note: Before starting, ensure both your controller and mobile device can access the internet.

  • For Omada Software Controller:
    1. Ensure Cloud Access is enabled on your controller and your controller has been bound with your TP-Link ID.
    2. Launch the Omada App and log in with your TP-Link ID. Go to "Cloud Access". A list of controllers bound with your TP-Link ID will appear. You can then further configure the controller.
  • For Omada Hardware Controller:
    1. Ensure Cloud Access is enabled on your controller. By default, Cloud Access is enabled. Verify that the Cloud LED is flashing slowly.
    2. Launch the Omada App and log in with your TP-Link ID. Go to "Cloud Access". Tap the "+" button in the upper-right corner to add your controller. You can then further configure the controller.

Environmental and Physical Specifications

Community and Support

To ask questions, find answers, and communicate with TP-Link users or engineers, please visit the TP-Link Community: https://community.tp-link.com/business.

For technical support and other information, please visit https://www.tp-link.com/support/?type=smb.

A QR code is also provided for quick access to support information (QR code excluded).

Declarations of Conformity

EU Declaration of Conformity:

• For ES205G/ES206GP/ES208G: TP-Link declares that the device complies with essential requirements and other provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863. The original EU declaration of conformity can be found at https://www.tp-link.com/en/support/ce/.
• For ES205GP/ES210GMP: TP-Link declares that the device complies with essential requirements and other provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and (EU)2015/863. The original EU declaration of conformity can be found at https://www.tp-link.com/en/support/ce/.

UK Declaration of Conformity:

TP-Link declares that the device complies with essential requirements and other provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016. The original UK declaration of conformity can be found at https://www.tp-link.com/support/ukca/.

Regional Availability

Some models featured in this guide may be unavailable in your country or region. For local sales information, visit https://www.tp-link.com/business-networking/.

Safety Information

• Keep the device away from water, fire, humidity, or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If service is needed, please contact TP-Link.
• Do not use a damaged charger or USB cable to charge the device.
• Do not use any chargers other than those recommended by TP-Link.
• The adapter shall be installed near the equipment and shall be easily accessible.
• Use only power supplies provided by the manufacturer and included in the original product packaging. If you have any questions, please contact TP-Link.
• Place the device with its bottom surface downward.
• (For ES205GP/ES206GP/ES210GMP) The socket-outlet shall be installed near the equipment and shall be easily accessible.
• (For ES205GP/ES206GP/ES210GMP) The plug on the power supply cord is used as the disconnect device; the socket-outlet shall be easily accessible.
• (For ES205GP/ES206GP/ES210GMP) Plug the product into wall outlets with an earthing connection through the power supply cord.
• (For ES205GP/ES206GP/ES210GMP) The PoE ports shall not be used to charge lithium batteries or devices supplied by lithium batteries.