1. Produk Lebihview
The FOTING In/Above Ground Pool Pump is a self-priming, dual-speed pump designed for efficient water circulation in various swimming pools. Equipped with a robust 2HP copper wire motor, it offers a flow rate of up to 3170 GPH (low speed) and 7000 GPH (high speed), with a maximum head lift of 69 feet. This pump features thermal overload protection for enhanced safety and longevity, and includes a removable filter basket and drain plug for easy maintenance. It is suitable for both above-ground and in-ground pool applications, as well as water parks, bathing pools, hot tubs, spas, and irrigation systems.
Figure 1: FOTING In/Above Ground Pool Pump with included 1.5" and 2" NPT inlet connectors and waterproof tape.
2. Informasi Keselamatan
Harap baca dan pahami semua petunjuk keselamatan sebelum pemasangan dan pengoperasian. Kegagalan mengikuti petunjuk ini dapat mengakibatkan sengatan listrik, kebakaran, atau cedera serius.
- Selalu putuskan aliran listrik ke pompa sebelum melakukan servis atau pemeliharaan apa pun.
- Pastikan pasokan listrik sesuai dengan tegangan pompa.tagpersyaratan e (230V).
- The pump must be installed by a qualified electrician in accordance with all local and national electrical codes.
- Jangan operasikan pompa jika kabel daya rusak.
- Jauhkan anak-anak dan orang yang tidak berkepentingan dari pompa selama pengoperasian.
- The pump is equipped with thermal overload protection. If the pump stops unexpectedly, allow it to cool down before attempting to restart. Investigate potential causes such as clogs or insufficient water flow.
3. Pengaturan dan Instalasi
Proper installation is crucial for the pump's performance and longevity. The pump is self-priming, but proper plumbing connections are essential.
3.1 Pembongkaran dan Pemeriksaan
- Keluarkan semua komponen dari kemasannya dengan hati-hati.
- Verify that all parts are present: pump unit, two 1.5" NPT inlet adapters, two 2" NPT inlet adapters, and waterproof tape.
- Inspect the pump for any visible damage that may have occurred during shipping. Do not install if damaged.
3.2 Penempatan
- Place the pump on a solid, level surface near the pool.
- Pastikan ventilasi yang memadai di sekitar motor.
- Position the pump to minimize the length of suction and discharge piping.
3.3 Sambungan Pipa
The FOTING pump supports two methods for water pipe connection using the included 1.5" and 2" NPT inlet adapters.
Figure 2: Two methods for connecting water pipes to the pump, utilizing 1.5-inch and 2-inch PVC pipe adapters.
- Method 1: Direct PVC Pipe Connection
Connect 1.5" or 2" PVC pipes directly to the pump's inlet and outlet ports using the appropriate adapters and waterproof tape for a secure, leak-free seal. - Method 2: Flexible Hose Connection
Utilize the provided adapters to connect flexible hoses (1.5" or 2") to the pump. Ensure hose clamps are used for a tight connection. - Ensure all connections are sealed properly to prevent air leaks, which can affect pump priming and efficiency.
3.4 Koneksi Listrik
This pump operates on 230V. A power cord is not included and must be wired by a qualified electrician according to local electrical codes.
- Ensure the power supply is off before making any electrical connections.
- Connect the pump to a dedicated circuit with appropriate overcurrent protection.
- Verifikasi volume yang benartage dan ampperingkat era.
4. Operasi
The FOTING pool pump features dual-speed operation, allowing you to optimize performance and energy consumption.
4.1 Priming Pompa
- Before initial startup, ensure the pump is filled with water through the skimmer or by removing the transparent lid and filling the filter basket housing.
- Close all drain valves and ensure the pool water level is above the skimmer.
- Once filled, replace the lid securely. The pump's self-priming capability will then quickly establish water flow.
4.2 Dual Speed Control
The pump offers two operating speeds: High and Low. A switch located at the bottom of the motor allows you to select the desired speed.
Figure 3: High Speed mode provides 7000 GPH for rapid water circulation and daytime use.
- High Speed (7000 GPH): Ideal for faster filtration, cycling the entire pool volume quickly, and during periods of heavy use or when cleaning the pool.
Figure 4: Low Speed mode provides 3170 GPH for energy saving and quieter operation during off-peak hours.
- Low Speed (3170 GPH): Recommended for energy saving, quieter operation, and maintaining filtration during less active periods or overnight.
Adjust the speed based on your pool's size, filtration requirements, and desired energy consumption.
5. Pemeliharaan
Regular maintenance ensures optimal performance and extends the lifespan of your FOTING pool pump.
5.1 Membersihkan Keranjang Filter
The pump is equipped with a removable filter basket to capture debris. The transparent lid allows for easy visual inspection.
Figure 5: The extra-large filter basket effectively collects leaves, twigs, and gravel, and is easily removable for cleaning.
- Matikan pompa dan putuskan daya.
- Unscrew the transparent lid counter-clockwise.
- Lepaskan keranjang filter dan buang semua kotoran yang terkumpul.
- Bilas keranjang secara menyeluruh dengan air.
- Periksa cincin-O pada tutupnya untuk melihat apakah ada keretakan atau keausan; ganti jika perlu.
- Place the clean basket back into the pump and securely fasten the lid.
5.2 Draining the Pump
The integrated drain plug allows for easy water drainage, particularly useful for winterization or extended periods of non-use.
Gambar 6: Lebihview of pump features including the drain plug for easy water removal and the transparent cover for filter basket visibility.
- Matikan pompa dan putuskan daya.
- Locate the drain plug at the bottom of the pump housing.
- Unscrew the drain plug to allow water to exit the pump.
- Setelah airnya habis, pasang kembali sumbatnya dengan aman.
6. Penyelesaian masalah
This section provides solutions to common issues you may encounter with your FOTING pool pump.
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Pompa tidak menyala | Tidak ada pasokan daya Beban berlebih termal diaktifkan Masalah motorik | Periksa sambungan daya dan pemutus arus. Allow pump to cool down; check for clogs. Hubungi dukungan pelanggan jika masalah berlanjut. |
| Pompa menyala tetapi tidak ada aliran air. | Pompa tidak disiapkan Kebocoran udara di saluran hisap Clogged filter basket/impeller | Pastikan pompa terisi air. Check all suction line connections for tightness. Clean filter basket; inspect impeller for debris. |
| Aliran air berkurang | Keranjang filter tersumbat Partially blocked plumbing Permukaan air kolam rendah | Bersihkan keranjang filter. Inspect and clear plumbing lines. Ensure pool water level is adequate. |
| Kebisingan yang berlebihan | Kebocoran udara Puing-puing di impeler Keausan bantalan motor | Check suction line for air leaks. Bersihkan impeller. Hubungi dukungan pelanggan. |
7. Spesifikasi
Detailed technical specifications for the FOTING In/Above Ground Pool Pump.
| Atribut | Nilai |
|---|---|
| Merek | FOTING |
| Nomor Model | J11502-Dual Speed-230V |
| Gaya | 2HP Dual Speed-230V |
| Warna | Black&blue |
| Bahan | Termoplastik |
| Dimensi Produk (P x L x T) | 25.5" x 7.8" x 11" |
| Berat Barang | 37 pon |
| Sumber Daya | AC |
| Jil.tage | 230 Volt |
| Laju Aliran Maksimum | 116 Galon Per Menit (7000 GPH) |
| Tinggi Angkat Maksimum | 69 Kaki |
| Tipe Motor | Motor Kawat Tembaga |
| Perlindungan | Perlindungan Beban Termal |
Figure 7: Performance curve illustrating the relationship between head lift and flow rate for both high and low speeds.
8. Garansi dan Dukungan
FOTING provides a THREE-YEAR after-sale service for this product.
If you encounter any problems or have questions regarding your FOTING pool pump, please contact our customer support team for assistance. Refer to your purchase documentation for specific contact details or visit the official FOTING weblokasi.