BoxWave DirectSync PD Cable (3ft) - USB-C to USB-C (100W) Instruction Manual

1. Pendahuluan

This manual provides essential instructions for the proper use and maintenance of your BoxWave DirectSync PD Cable. This USB-C to USB-C cable is designed for efficient power delivery up to 100W and high-speed data transfer, compatible with various USB-C devices, including the XTool XT90.

Image 1.1: The BoxWave DirectSync PD Cable, coiled for storage.

2. Fitur Produk

• Pengiriman Daya 100W: Supports fast charging for a wide range of USB-C devices, including laptops, tablets, and smartphones, with power delivery up to 100 Watts.
• Transfer Data Berkecepatan Tinggi: Facilitates data synchronization at speeds up to 480Mbps, allowing for quick file transfers while charging.
• Desain Anyaman yang Tahan Lama: Constructed with high-grade nylon braiding for enhanced durability, resistance to tangles, and protection against daily wear and tear.
• Reinforced Strain Relief: Features rubberized grommet strain reliefs at both connector ends to prevent cable fraying and ensure a stable connection over time.
• Universal USB-C Compatibility: Designed for use with USB-C enabled devices, such as the XTool XT90.

Image 2.1: The cable connected to a laptop, illustrating its power delivery capability.

Image 2.2: The cable simultaneously charging a laptop and a smartphone, demonstrating charge and sync functionality.

3. Pengaturan dan Koneksi

1. Identifikasi Port: Ensure your device and power source (e.g., wall adapter, computer) have compatible USB-C ports.
2. Hubungkan ke Sumber Daya: Insert one end of the BoxWave DirectSync PD Cable into a USB-C power adapter or a USB-C port on a computer.
3. Hubungkan ke Perangkat: Insert the other end of the cable into the USB-C port of your device (e.g., XTool XT90, laptop, smartphone).
4. Verifikasi Koneksi: Confirm that both ends of the cable are securely seated in their respective ports. Your device should indicate that it is charging or connected for data transfer.

Image 3.1: The BoxWave DirectSync PD Cable connected to an XTool XT90 device.

4. Petunjuk Pengoperasian

4.1 Mengisi Daya Perangkat Anda

To charge your device, connect the cable as described in the "Setup and Connection" section. The cable supports Power Delivery (PD) up to 100W, allowing for rapid charging when paired with a compatible power adapter and device. Charging speed may vary based on the power source and device capabilities.

4.2 Transfer Data

For data transfer, connect your device to a computer using the BoxWave DirectSync PD Cable. Once connected, your device should appear as a removable storage device or prompt you to select a connection mode (e.g., "File Transfer," "PTP"). Follow your device's instructions to initiate data transfer. The cable supports data speeds up to 480Mbps.

5. Pemeliharaan dan Perawatan

• Penyimpanan: Store the cable in a clean, dry place away from extreme temperatures and direct sunlight. Avoid tightly coiling or bending the cable at sharp angles to prevent internal damage.
• Pembersihan: Gunakan kain lembut dan kering untuk membersihkan kabel dan konektor dengan lembut. Jangan gunakan pembersih cair atau bahan abrasif.
• Penanganan: Always grasp the connector head when plugging or unplugging the cable, rather than pulling on the cable itself. This helps preserve the integrity of the strain relief and internal wiring.
• Inspeksi: Periksa kabel secara berkala untuk melihat tanda-tanda keausan, sobekan, atau kerusakan pada konektor. Hentikan penggunaan jika ditemukan kerusakan.

Gambar 5.1: Close-up view of the durable nylon braided cable design.

Image 5.2: Detail of the reinforced strain relief, designed to prevent cable damage at the connector.

6. Penyelesaian masalah

7. Spesifikasi

• Model: DirectSync PD Cable
• Merek: KotakGelombang
• Tipe Konektor: USB-C ke USB-C
• Panjang Kabel: 3 feet (approximately 100 cm)
• Pengiriman Daya: Hingga 100W
• Kecepatan Transfer Data: Hingga 480Mbps
• Bahan: High-grade Nylon Braided
• Warna: Hitam legam
• Berat Barang: 3 ons

8. Garansi dan Dukungan

BoxWave products are designed for reliability and performance. For information regarding warranty coverage, technical support, or to contact customer service, please visit the official BoxWave website or refer to the product packaging for specific details.

Weblokasi: www.boxwave.com