Bafang Electric Bike Conversion Kit User Manual

Produk Selesaiview

The BAFANG BBS01B Electric Bike Conversion Kit transforms a standard bicycle into an e-bike, offering pedal-assist and throttle modes. This kit includes a powerful mid-drive motor, a C18 display, and a 36V 13Ah downtube battery, along with all necessary accessories for installation.

Fitur Utama

• BAFANG BBS01B 36V 250W mid-drive motor with 80NM torque.
• 3.5" Bafang C18 display with 9 levels of pedal assist and auto backlight.
• Includes all tools required for conversion.
• Wide compatibility for bicycles with 34-36mm diameter bottom brackets (68-73mm width), suitable for V-brake and disc brake (not backpedal brake), and chain drive (not belt drive).
• 36V 13Ah downtube battery with 30A BMS for overload, over-discharge, over-current, and short circuit protection, offering 800-1000 cycles.

Product in Action

Video: A brief demonstration of the Bafang mid-drive motor in use on an electric bicycle.

Apa yang Termasuk

Your BAFANG Electric Bike Conversion Kit comes with the following components:

Gambar: Komprehensif view of all components included in the Bafang Electric Bike Conversion Kit.

• Mid-drive Motor (BBS01B 36V 250W)
• Tampilan C18
• 13Ah Downtube Battery
• E-Brake Levers
• 46T Chainring & Guard
• Sensor Kecepatan
• Lengan Engkol
• Kabel 1T4
• Mur Pengunci
• L depanamp
• Tombol Pengatur Waktu Jempol
• Kunci
• Sarung tangan
• Ikatan Kabel
• Crank Removal Tools

Pemeriksaan Kompatibilitas

Before installation, ensure your bicycle meets the following compatibility requirements:

Image: Visual guide for checking bike frame and bottom bracket compatibility.

• Bagian bawah braket: Must have a diameter between 34-36mm and a width between 68-73mm.
• Tipe Rem: Suitable for V-brake and disc brake systems. Not compatible with backpedal brakes.
• Sistem transmisi: Only suitable for chain drive systems. Not compatible with belt drive.
• Bahan Bingkai: Installation on carbon fiber frames is NOT suggested.

Panduan Instalasi

Follow these steps carefully to install your BAFANG mid-drive conversion kit. For a visual guide, please refer to the official installation video below.

Video Instalasi

Video: Step-by-step installation guide for the Bafang e-bike conversion kit.

Petunjuk Langkah demi Langkah

1. Hapus Komponen yang Ada: Carefully remove the chainring, crank arms, and bottom bracket from your bicycle.
2. Pasang Chainring: Attach the new chainring to the motor using the provided M5 bolts.
3. Install Chain Guard: Secure the chain guard using the supplied screws.
4. Dudukan Motor: Slide the motor assembly into the bottom bracket shell of your bike frame.
5. Motor Aman: Use the Y-shaped motor mount bracket on the left side to secure the motor.
6. Install Crank Arms: Attach the crank arms to the motor spindle.
7. Rantai Instalasi: Route and install the chain onto the new chainring and rear cassette.
8. Hubungkan Kabel Harness: Connect the main wiring harness into the motor assembly.
9. Hubungkan Periferal: Connect the front lamp, speed sensor, and gear sensor (if applicable) to the main harness.
10. Install Brake Levers: Slide the brake levers onto the handlebar and tighten them securely.
11. Install Thumb Throttle: Install the thumb throttle onto the handlebar and tighten.
12. Instalasi Layar: Mount the C18 display to your handlebars and secure it.
13. Install Battery Mount: Securely install the battery mount onto your bike frame, typically on the downtube.
14. Pasang Baterai: Slide the battery onto the installed battery mount until it clicks into place.

Image: Detailed wiring diagram for connecting all components of the Bafang kit.

Petunjuk Pengoperasian

Once installed, power on your e-bike and familiarize yourself with the C18 display and pedal assist functions.

Power On and System Check

Press and hold the power button on the C18 display to turn on the system. The display will show battery level, speed, and pedal assist level.

Image: The Bafang C18 display, showing key ride information.

Mode Bantuan Pedal

The C18 display offers 9 levels of pedal assist. Use the up/down buttons to adjust the assist level. Higher levels provide more motor assistance.

• Pure Throttle Mode: Engage the thumb throttle for motor power without pedaling.
• Mode Bantuan Pedal: The motor provides assistance as you pedal, with 9 adjustable levels.
• Mode Bantuan Berjalan: Memberikan bantuan kecepatan rendah untuk menuntun sepeda.
• Modus Manual: Ride the bike without any motor assistance.

Image: Bafang motor specifications and available riding modes.

Pemeliharaan

Regular maintenance ensures the longevity and optimal performance of your BAFANG e-bike conversion kit.

Perawatan Baterai

• Isi daya baterai secara teratur, bahkan saat tidak digunakan, untuk menjaga kondisi baterai tetap baik.
• Hindari mengosongkan baterai sepenuhnya.
• Simpan baterai di tempat yang sejuk dan kering.
• The built-in 30A BMS protects against overcharge, over-discharge, over-current, and short circuits.

Motor and Drivetrain

• Keep the chain and chainring clean and lubricated.
• Periodically check all bolts and connections for tightness.
• Ensure the speed sensor is clean and properly aligned.

Inspeksi Umum

• Regularly inspect all wiring for any signs of wear or damage.
• Check brake functionality and adjust as needed.
• Keep the display clean and protected from harsh weather.

Penyelesaian Masalah

If you encounter issues with your BAFANG e-bike kit, refer to the common problems and solutions below.

Masalah Umum

Motor not turning on / No power:

• Periksa tingkat pengisian baterai.
• Ensure all electrical connections are secure, especially the main wiring harness to the motor and battery.
• Verify the display is properly connected and powered on.
• Inspect for any visible damage to cables or connectors.

Chain skipping:

• Ensure the chainring is correctly installed and tightened.
• Check chain tension and condition; a worn chain may need replacement.
• Verify the chain guard is not interfering with chain movement.

Motor not assisting / inconsistent power:

• Check the pedal assist level on the C18 display.
• Ensure the speed sensor is clean, properly mounted, and its magnet is correctly aligned with the sensor.
• Verify the throttle connection if using throttle mode.

Spesifikasi

Garansi dan Dukungan

For warranty information and technical support, please refer to the documentation provided with your purchase or contact BAFANG customer service directly. Protection plans may also be available for extended coverage.