Schneider Electric Altivar 310 Variable Speed Drive User Manual

1. Pendahuluan dan Selesaiview

This manual provides essential information for the safe and efficient operation of the Schneider Electric Altivar 310 Variable Speed Drive (VSD), model ATV310HU15N4E. The Altivar 310 series is designed for simple machine applications, offering robust performance and ease of integration.

Fitur utama dari model ini meliputi:

• Product Group: Easy Altivar 310
• Product Type: Variable Speed Drive
• Application: Simple Machine
• Assembly: With Heat Sink
• Network Phases: Three Phases
• Nilai Pasokan Voltage: 380-460 Volts (-15% to +10%)
• Motor Power: 1.5 kW (2 HP)
• Tingkat Kebisingan: 50 dB

Gambar 1.1: Depan view of the Altivar 310 Variable Speed Drive, showing the display and control panel.

2. Informasi Keselamatan

BAHAYA: RISIKO SENGATAN LISTRIK, LEDAKAN, ATAU KILAT BUSUR LISTRIK.

Only qualified personnel should install, adjust, repair, or maintain this equipment. Read and understand this manual completely before installing or operating the Altivar 310 VSD. Failure to follow these instructions will result in death or serious injury.

Tindakan Pencegahan Keamanan Umum:

• Always disconnect power before working on the drive or connected equipment. Wait at least 15 minutes after disconnecting power for capacitors to discharge.
• Pastikan drive dan motor terhubung ke ground dengan benar.
• Protect against accidental startup.
• Gunakan alat pelindung diri (APD) yang sesuai.
• Verifikasi bahwa volume pasokantage matches the drive's rated voltage.

3. Pengaturan dan Instalasi

Proper installation is crucial for the performance and longevity of the Altivar 310 VSD. Follow these guidelines carefully.

Pemasangan:

The drive should be mounted vertically on a flat, stable surface. Ensure adequate clearance for ventilation, especially around the heat sink. The unit is designed for assembly with a heat sink for efficient thermal management.

Gambar 3.1: Sisi view of the Altivar 310 VSD with the protective cover opened, revealing internal components and connection terminals.

Koneksi Kabel:

All wiring must comply with local and national electrical codes. The Altivar 310HU15N4E is a three-phase unit. Connect the main power supply to the L1/R, L2/S, L3/T terminals and the motor to the U, V, W terminals. Ensure proper grounding (PE) connections.

Gambar 3.2: Atas view of the Altivar 310 VSD, showing the input (R/L1, S/L2, T/L3) and output (U, V, W) terminals, along with control terminals.

Penunjukan Terminal:

• R/L1, S/L2, T/L3: Three-phase AC power input (380-460V).
• U, V, W: Three-phase motor output.
• Bahasa Indonesia: Sambungan pembumian pelindung.
• Terminal Kontrol: For digital inputs, analog inputs/outputs, and relay outputs (refer to detailed wiring diagrams in the full product manual for specific pinouts).

4. Petunjuk Pengoperasian

The Altivar 310 VSD can be operated via its integrated control panel or external control signals.

Panel Kontrol Berakhirview:

The front panel features a 4-digit display, navigation buttons, and an ESC button. The green rotary knob is used for value adjustment and menu navigation.

• Menampilkan: Shows parameters, values, and fault codes.
• Tombol Putar: Used to scroll through menus and adjust parameter values. Press to confirm selection.
• Tombol ESC: Used to exit menus or cancel an operation.

Operasi Dasar:

1. Nyalakan: Apply power to the drive. The display will illuminate.
2. Pengaturan Parameter: Use the rotary knob to navigate to the desired parameter menu (e.g., frequency reference, acceleration/deceleration times). Press the knob to enter the parameter, adjust the value, and press again to confirm.
3. Mulai/Berhenti: Depending on the control mode (local or remote), use the appropriate start/stop command. For local control, there might be dedicated buttons or a specific parameter setting.
4. Pemantauan: The display can show real-time values such as output frequency, motor current, and motor speed.

Refer to the comprehensive programming manual for detailed parameter descriptions and advanced control modes.

5. Pemeliharaan

Regular maintenance ensures optimal performance and extends the lifespan of your Altivar 310 VSD.

Pemeriksaan Rutin:

• Pembersihan: Periodically clean the drive's exterior and ventilation openings to prevent dust accumulation, which can impede cooling. Use a soft, dry cloth. Do not use solvents.
• Inspeksi Penggemar: Check the cooling fan for proper operation and ensure it is free from obstructions. Replace if noisy or not functioning correctly.
• Kekencangan Terminal: Annually check the tightness of all power and control terminal connections. Loose connections can cause overheating and damage.
• Kondisi Lingkungan: Pastikan lingkungan pengoperasian tetap dalam rentang suhu dan kelembapan yang ditentukan.

WARNING: Always disconnect and lock out power before performing any maintenance. Allow 15 minutes for capacitor discharge.

6. Penyelesaian masalah

Bagian ini memberikan panduan untuk masalah umum. Untuk masalah yang kompleks, hubungi dukungan teknis Schneider Electric.

Kesalahan dan Solusi Umum:

For a complete list of fault codes and detailed troubleshooting steps, refer to the full Altivar 310 programming manual.

7. Spesifikasi Teknis

8. Garansi dan Dukungan

Schneider Electric products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Schneider Electric weblokasi.

Dukungan Pelanggan:

For technical assistance, troubleshooting, or service inquiries, please contact Schneider Electric customer support. You can find contact information on the official Schneider Electric websitus atau melalui distributor lokal Anda.

Online resources and additional documentation, including detailed programming manuals and wiring diagrams, are available on the Schneider Listrik weblokasi.