iClever BK60 Wireless Keyboard
Package Contents
- 1 x Wireless Solar Keyboard
- 1 x User Manual
Specifications
| Connection Type | Bluetooth 5.0 |
| Bluetooth Technology | Bluetooth Low Energy |
| Dimensions | 429.4*150.5*20.63mm |
| Connected Devices | Up to 3 |
| Layout Compatibility | Windows/Mac |
| Power | Solar Pannel + CR2032 Battery |
| Solar Charge Time (500 lux)
| 5-7 Hours by Solar / light
|
| Solar Work Time without Light | 3-4 Days {based on 2 hours/day) |
| CR2032 Battery Working Time | 13 Months {based on 2 hours/day) |
| Sleep Time | 30 Minutes (press any key to wake) |
| Key Structure | Scissor Switch |
| Frequency Band | 2402MHz – 2480MHz
|
| Maximum Transmission power | 0 dBm |
System Requirements
- iOS 9.0 or later iPhone/iPad
- macOS 10.12 or later Mac/iMac
- Windows 8 or later with Bluetooth HID Profile PC/laptop/tablet
- Android 6.0 or later smartphone
NOTE:
It is not fully compatible with Bluetooth adapter, Mac mini, Samsung Smart TV1 and Nokia phones.
Product Overview
- Power Indicator: slide the power switch to ON to turn on the keyboard.
- Bluetooth Indicator: hold and press Bluetooth Button for 3 seconds to pair mode and the indicator keep flashing.
- Low Battery Indicator: when the keyboard is at critical battery level (5% or below), the battery LED will pulse red.
Power Saving Mode
The keyboard will enter power-saving mode after 30 minutes of inactivity. Press any key to activate it.
Note:
there may be a slight typing delay during the first 3 seconds of waking up.
Guide to Use
How to pair with Bluetooth devices?
Pair with the 1st device
- Step 1. Move the power switch to “ON” to tum on the keyboard, and the indicator will be on for 3s.
- Step 2. Pull out the tab from the top side to activate the CR2032 Battery.
- Step 3. Pull out tabs from two of Solar Pannel to activate it.
- Step 4. Click
once to choose Bluetooth channel 1, then hold and press this button for 5s until the indicator keeps flashing to Bluetooth pairing mode. - Step 5. On your device, open the Bluetooth settings and select “iClever Solar KB” from the list to connect ii.
How to find “iClever Solar KB” in different system:
- For Windows 10:
Click Win Key> Settings> Devices> Bluetooth & other devices> Add Bluetooth or other device > Bluetooth > select “iClever Solar KB” to connect. - For Mac {MacBook/iMac):
Click System Preferences > Bluetooth > select “iClever Solar KB” to connect. - For iOS {iPad/iPhone) and Android:
Click Setting > Bluetoolh > select “iClever Solar KB” to connect.
Pair with the 2nd device
Step 1. Click 
once to choose Bluetooth channel 2, then hold and press this button for 5s until the indicator keeps fiashing to Bluetooth pairing mode. Step 2. On your device, open the Bluetooth settings and select “iClever Solar KB” from the list to connect ii.
Pair with the 3rd device
- Step 1. Click
once to choose Bluetooth channel 3, then hold and press this button for 5s until the indicator keeps fiashing to Bluetooth pairing mode. Step 2. On your device, open the Bluetooth settings and select “iClever Solar KB” from the list to connect it.
Notes:
- The Bluetooth pairing name may be shown as “Keyboard”.
- Keep the keyboard and your Bluetooth device in 30cm in Bluetooth pairing. —each channel can pair with 1 device (3 channels in total).
- The keyboard will connect with the last-used device automatically.
Switch connection between multiple devices
Switch connection between multiple devices previously connected Press the corresponding 
button to switch keyboard connection to previously connected devices.
Keys and Functions
The table below describes special key combinations for different operating systems.
Change/ Remove Battery
- When the keyboard is at critical battery level (5% or below), the battery LED will pulse red.
- Use a screwdriver to remove screw on the battery tray.
- Pull the battery tray out and replace the old battery with CR2032 coin cell battery.
- Dispose of the battery according to local laws.
Contact
For more questions, please contact us by support@iclever.com
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the use(s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the Instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING!
The product contains non-replaceable batteries. Remove and Immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate.
Even used batteries may cause severe injury or death. Call a local poison control center for treatment information. Non-rechargeable batteries are not to be recharged.
Do not force discharge, recharge, disassemble, heat above {manufacture(s specified temperature rating: 65°) or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical bums The compatible battery type(CR2032)
The nominal battery voltage: 3V
Ensure the batteries are installed correctly according to polarity{+ and -) Do not mix old and new batteries, different brands or types of batteries, such as alkaline, carbon-zinc, or rechargeable batteries.
Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations. Always completely secure the battery compartment. If the battery compartment does not close securely, slop using the product. remove the batteries, and keep them away from children.
WARNING
INGESTION HAZARD: This product contains a button cell or coin battery.
WARNING
- INGESTION HAZARD: This product contains a button cell or coin battery.
- DEATH or serious injury can occur if ingested.
- A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
- KEEP new and used batteries OUT OF REACH of CHILDREN
- Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
FAQ
Delay/laggy when typing or frequently get disconnected.
Restart your Bluetooth device. ,Make sure that iClever device and your device are within close proximity of each other. ,Try moving away at least 8 inches from: Any device that could emit wireless waves: Microwave, cordless phone, baby monitor, wireless speaker, garage door opener, WiFi router Computer power supplies, Metal or metal wiring in the wall ,Do not use your wireless keyboard on metal surfaces. ,Check your computer memory, insufficient memory may cause the delay. ,Try on a different APP/device to connect.
How much light is needed?
iClever Solor Keyboard requires only a modest level of light to operate and store energy. Indirect sunlight or indoor illumination is fine. When exposed to dim room light on a continuous basis, the keyboard has enough power for use. Because indoor environments usually have periods of darkness, a moderate level of room lighting is recommended for much of the day. The recharge time for the keyboard is much less in brightly lit environments or when the keyboard is placed in direct sunlight. The keyboard stores energy automatically, even when turned off. This stored energy allows you to use the keyboard without light for a while. With a full charge, the keyboard can operate up to 3 days in total darkness before needing a recharge.
Checking for adequate light
To check the battery status, there's no shortcut. When the keyboard's battery reaches a critical level {5% or below), the battery LED will pulse red.
Why is a CR2032 coin cell battery built in?
The CR2032 backup battery guarantees that the keyboard remains functional even in darkness or low light. This battery can power the keyboard for more than 13 months, based on 2 hours of daily use.
Documents / Resources
 | iClever BK60 Wireless Keyboard [pdf] User Manual BK60, BK60 Wireless Keyboard, BK60, Wireless Keyboard, Keyboard |
