VIS-ISMART503V2
AI IP Camera
One-stop solution provider
Product features
| Image Sensor | Sensor | 1/2.8″ color CMOS Sensor |
| Lens | M12, f: 3.2 mm, F2.2, 3 megapixel | |
| Visual angle | H: (horizontal) 96°, V: (vertical) 56°, D: (diagonal) 128° | |
| Minimum illumination | 0.01 Lux | |
| Audio | Input / Output | Two-way voice intercom available (built-in microphone and speaker) |
| Audio compressing method | AAC | |
| Video | Video compressing method | H.264, H.265 |
| Lighting frequency | 50 Hz, 60 Hz | |
| Image frame rate | 15 fps | |
| Maximum image resolution | 2304 x 1296 px | |
| Light source for night vision | Mid-power infrared lamp (850nm in wavelength) / dual-source white-light source with an irradiation distance of 7m | |
| Network | Wireless network | 2.4G Wi-Fi (IEEE802.11b/g/n), built-in antenna |
| Protocols supported | TCP/IP, UDP/IP, DHCP, RTMP, MUTP | |
| IP address supported | Dynamic IP address supported | |
| Pan-tilt | rotation angle | H: (horizontal) 355°, V: (vertical) 90° |
| Alarm notification | Alarm methods | Alarm push by mobile APP, white light flashing and alarm sound |
| AI | Intelligent features | Human contour detection, activity zone, vechicle detection, pet snapshot and package inspection |
| Wake-up | Wake-up methods | PIR body induction wake-up & remote wake-up |
| Video recording | Recording methods | Alarm triggered recording & manual recording |
| Video storage | Local micro SD card (not included) & cloud storage | |
| Indicator lamps | LED indicator | RGB tri-color lamp indicating the status of power / network signal / functionality |
| Battery | Capacity | 9000 mAh |
| Removability | Unremovable | |
| Battery life | 8 months (provided that 20 10s videos are recorded per day, pan-tilt does not rotate) | |
| Standby time | 2 years | |
| Charging voltage | DV 5 V +/- 5% 1.5 A | |
| Charge time | Within 15 hours | |
| Protection method | IP65 is dustproof and waterproof; over-current/over-discharge/over-charge/short circuit/charging protection at high & low temperatures | |
| Power consumption | Standby | 2.23 W (3.8V 588 mA) |
| Daytime operation | 1 W (3.8 V 264 mA) | |
| Night operation | 1.68 mW (4 V 0.42 mA) | |
| Interfaces | Power supply | 1 micro USB interface |
| SD card slot | 1 micro SD card slot (up to 128GB supported, SD card not included) | |
| Keys | 1 reboot key & 1 on/off key | |
| Installation method | Installation method | Ceiling or wall hanging |
| Environment | Dustproof & waterproof | IP65 |
| Operating environment | Minus 10° ~ 45° C | |
| Storage environment | Minus 20° ~ 60° C | |
| Specifications | Size (L*W*H) | 81.3 mm * 119.2 mm * 80.6 mm |
| Net weight | 500 g | |
| Gross Weight | 600 g | |
| Material + process | ABS + PC | |
| Color | White with high gloss | |
| Certifications | Certificate | CE, FCC, RoHS, WEEE, MSDS, UN38.3 |
Documents / Resources
 | i-SMART VIS-ISMART503V2 AI IP Camera [pdf] Owner's Manual VIS-ISMART503V2 AI IP Camera, VIS-ISMART503V2, AI IP Camera, IP Camera, Camera |