Instruction manual


Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.Save all warnings and
instructions for future reference.

Contents hide


When using the machine, always observe the enclosed safety warnings as well as the additional safety warnings.
The following symbols are used throughout this manual:
Denotes risk of personal injury or damage to the machine.


WARNING! This device produces an electromagnetic field during operation. This field may interfere in certain circumstances with active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend that persons with medical implants consult their physician and the medical implant manufacturer before using this device.


Pictograms on charger and battery
The following pictograms have been applied to the charger:

Indoor use only.
Double insulated.
SFail-safe isolating transformer.
Cut-out switch.
Read this manual carefully before using the machine.

The following pictograms have been applied to the battery:

Do not incinerate battery.
Do not expose charger and battery to temperatures above 40 °C.
Do not expose charger and battery to water.
Do not dispose of the battery in unsuitable containers.


Always check that the battery power corresponds to the voltage on the rating plate. Also make sure that the voltage of your charger corresponds to that of your mains.

Your rechargeable drill/screwdriver has been designed for drilling in wood, metal, stone and plastics and for screwdriving applications.

  1. On/off switch
  2. Forward/reverse switch
  3. LED light
  4. Torque adjustment collar
  5. Chuck
  6. Collar
  7. Battery
  8. Battery release button

Charging the battery
The battery (7) must be charged before first use.
Only after several charge and discharge cycles the battery will attain full capacity.

The red charging indicator lights when the battery is being charged.
The green charging indicator lights when the battery has been fully charged.
Never charge the battery for more than 5 hours. If the red indicator does not light, the battery may be too warm. In this case let the battery cool down before charging.

To install the battery (fig. B)
Slide the battery into the base of the drill until it clicks into place.
To remove the battery (fig. C)
Press the battery release button (8) and slide the battery from the base of the drill.
LED light (3)
Your drill/screwdriver is equipped with a LED light.
The LED light will light when you operate the machine, providing the work area to be lighted.
Positioning and removing a drill or screw bit (fig. A)

This tool is equipped with a keyless chuck (5).

Before positioning or removing a drill or screw bit always remove the battery from the machine.

Forward/reverse switch (fig. A)

Adjusting the torque (fig. A)

This machine has been fitted with an adjustable coupling to limit the torque when tightening screws.

Switching on and off (fig. A)


The machine does not require any special maintenance.



Voltage V 4.4
No-load speed min -1 0 – 700
Chuck capacity mm 0.8 – 10
Drilling capacity in steel mm 10
Torque positions 17+1
Battery type Li-ion
Battery capacity mAh 1,300
Charging duration battery h 3-5
Model number battery S-BP1807-14. 4V
Weight kg 1.4


Mains voltage V 110-240
Mains frequency Hz 50/60
Output voltage Vdc 16.8

Measured values determined according to EN60745: Typically the A-weighted sound pressure level of the machine is 87 dB(A).
Uncertainty K = 3 dB(A). The noise level when working can exceed 98 dB(A).
Wear hearing protection!
Vibration total values (triax vector sum) determined according to EN 60745: m/s 2  <2.5.
Uncertainty K = 1.5 m/s 2 .
Refer to the enclosed guarantee conditions for the terms and conditions of guarantee.
Your product, accessories and packaging should be sorted for environmental-friendly recycling.
Do not dispose of power tools into domestic waste. According to the European Guideline 2002/96/EC for Waste Electrical and Electronic
Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally friendly way.

Battery packs/batteries
Unwanted battery packs/batteries should be disposed of or recycled in an environmentally friendly way and in conformance with the local regulations.


• Rechargeable drill
EN 55014-1: 2006 + A1+ A2, & CISPR16-1-2-3
EN 55014-2: 1997+A1+A2,
EN60745-1:2009, EN60745-2-1:2010,
EN60745-2-2:2010 Afps GS 2014:01
• according to the provisions of the directives
2014/30/EU 2006/42/EC, ANNEX 1 2011/65/EU
Keeper of the technical documentation:

A.N.P van Oort
Dvize bv
Witte Vlinderweg 51,1521 PS Wormerveer, Nederland
+31 (0)75 303 0013,
Dvize bv Witte Vlinderweg 51
1521 PS Wormerveer
+31 (0)75 303 0013
Imported/Distributed by Dvize bv, The Netherlands
Licensed by Hyundai Corporation, Korea


Documents / Resources

HYUNDAI 56112 Boor Machine [pdf] Instruction Manual
56112 Boor Machine, 56112, Boor Machine
Tags: 5611256112 Boor MachineBoor MachineHYUNDAI
22 hours ago

Recent Posts

TOA F-1300WTWP Speaker Systems Instruction Manual

F-1300WTWP Speaker Systems OPERATING INSTRUCTIONS SPEAKER SYSTEMS F-1300B F-1300BT F-1300BTWP F-1300W F-1300WT F-1300WTWP Thank you…

39 seconds ago

KLARSTEIN 10030043 SHETLAND 600 Dehumidifier Instruction Manual

10030043 SHETLAND 600 Dehumidifier SHETLAND 600 Luftentfeuchter Dehumidifier Deshumidificador Déshumidificateur Deumidificatore 10030042 10030043 Sehr…

1 min ago

lumilum LUM-B34XTS-DMX1 Decoder Instruction Manual

LUM-B34XTS-DMX1 Decoder B43XT SERIES DMX1 (IP20) DecoDer / controller ModEl: lUM-B34XTS-dMX1 Lumilum® B34XT Series DMX…

2 mins ago

Klarstein 10034641 TOWNHOUSE Air Cooler User Manual

10034641 TOWNHOUSE Air Cooler TOWNHOUSE Luftkühler Air Cooler Enfriador de aire Rafraîchisseur d'air Raffreddatore d'aria…

3 mins ago

NINJA AG551ANZ Smart XL Grill and Air Fryer Smart Cook System Instructions

AG551ANZ Smart XL Grill and Air Fryer Smart Cook System VISIT US ONLINE AT:…

4 mins ago

PAX A920 OptConnect SIM Card Installation Guide

A920 OptConnect SIM Card DCCSUPPLY.COM SALES@DCCSUPPLY.COM 847-266-1220 PAX A920 OptConnect SIM Card Installation Instructions How…

4 mins ago