Detached Motion Sensor with 
5.0 SIG Mesh
HC038V/BT HCD038/BT
0/1-10V Output DALI Output
Product Description
HC038V/BT is a Bluetooth 0/1-10V control base whereas HCD038/BT is a Bluetooth DALI control base with a 30mA DALI power supply built in. They work with a wide range of microwave and PIR sensor heads. They are ideal for plastic luminaires as compared to metal luminaires because Bluetooth signals can transmit through the plastic. They are suitable for any typical indoor applications such as office, classroom, car park, warehouse, and other commercial/industrial areas. With Bluetooth wireless mesh networking, it makes communication much easier without any hardwiring, which eventually adds value to luminaires and saves costs for projects. Meanwhile, simple device setup and commissioning can be done via 
the app.
App Features
Grouping luminaires via mesh network
– Two levels: room & group
– Synchronization control
7 types of scene options to set up:
– Generic Scenes
– Lux ON/OFF Scenes
– Daylight Harvest (Open-loop)
– Daylight Harvest (Closed-loop)
– Simple circadian rhythm without daylight sensor (HCD038/BT)
– Advanced circadian rhythm with daylight sensor (HCD038/BT)
– Time-based Scene
App Features
 | Push switch configuration |
| Detailed motion sensor settings | |
| Schedule to run scenes based on time and date | |
| Astro timer (sunrise and sunset) | |
| Floorplan feature to simplify project planning | |
| Staircase function (master & slave) | |
| Offline commissioning | |
| Different permission levels via authority management | |
| Network sharing via QR code or key code | |
| Remote control via gateway support HBGW01 | |
| Interoperability with Hytronik Bluetooth product portfolio | |
| Compatible with EnOcean range of wireless switches | |
| Device firmware update over-the-air (OTA) | |
| Continuous development in progress… |
Hardware Features
 | HC038V/BT: 0/1-10V output : − 400VA (capacitive) − 800W (resistive) |
| HCD038/BT: 30mA DALI broadcast output for up to 15 LED drivers | |
| Plug’n’Play for flexible installation and cost saving assemble | |
| Support to control DT8 LED drivers (HCD038/BT) | |
| 2 Push inputs for flexible manual control(HCD038/BT) | |
| Zero crossing detection circuit to reduce in-rush current and prolong relay lifetime (HC038V/BT) | |
| Loop-in and loop-out terminals for efficient installation (HC038V/BT only) | |
| 5-year warranty |
Fully support EnOcean switch EWSSB/EWSDB
Technical Specifications (HC038V/BT HCD038/BT)
Bluetooth Transceiver
| Operation frequency | 2.4 GHz – 2.483 GHz |
| Transmission power | 4 dBm |
| Range (Typical indoor) | 10~30m |
| Protocol | 5.0 SIG Mesh |
Safety & EMC
| EMC standard (EMC) | EN55015, EN61000, EN61547 |
| Safety standard (LVD) | EN60669-1, EN60669-2-1 |
| RED | EN300328, EN301489-1/-17 |
| Certification | Semko, CB, CE , EMC, RED, RCM |
Input & Output Characteristics
| Operating voltage | 220~240VAC 50/60Hz |
| Stand-by power | <1W |
| Load ratings: HC038V/BT HCD038/BT | Capacitive: 400W; Resistive: 800W 30mA (max. 15 devices) |
| Warming-up | The 20s |
Environment
| Operation temperature | Ta: -20 °C ~ +55°C |
| Case temperature (Max.) | Tc: +75 °C |
| IP rating | IP20 |
Mechanical Structure & Dimensions
HC038V/BT (0/1-10V output)
HCD038/BT (DALI output)
Wire Preparation
To make or release the wire from the terminal, use a screwdriver to push down the button.
Wiring Diagram
Technical Specifications for Sensor Heads
PIR Sensor Properties
| Sensor principle | PIR detection |
| Operating voltage | 5VDC |
| Detection range* | HIR05 & HIR05/FM & HIR05/E & HIR07 Max installation height：3m Max detection range：6m (diameter) HIR11 Max installation height：15m (forklift) 12m (single person) Max detection range： 20m (diameter) HIR12 Max installation height：15m (forklift) 12m (single person) Max detection range： 18m * 6m (L * W) |
HF Sensor Properties
| Sensor principle | High Frequency (microwave) |
| Operating voltage | 5VDC |
| Operation frequency | 5.8GHz +/- 75MHz |
| Transmission power | <0.2mW |
| Detection range* | SAM20 / SAM21 / SAM22 Max installation height：3m Max detection range：12m (diameter) SAM23 Max installation height：15m (forklift) 12m (single person) Max detection range： 20m (diameter) |
* The detection range is heavily influenced by sensor placement (angle) and different walking paces. It may be reduced under certain conditions.
PIR & microwave sensor heads
The range of PIR and microwave sensor heads below offers a powerful number of Plug’n’Play feature options to expand the fiexibility of luminaires design. This approach to luminaire design reduces space requirements and component costs whilst simplifying production.
A. HIR05
PIR sensor head The cable length is around 65cm.
B. HIR05/E
PIR sensor head The cable length is around 65cm.
C. HIR05/FM
PIR sensor head The cable length is around 65cm.
B. HIR07
PIR sensor head Photocell AdvanceTM The cable length is around 30cm.
C. HIR11/S
PIR sensor head Surface mounting For high bay application IP65 (facia/lens part) The cable length is around 65cm.
D. HIR11/F
PIR sensor head Flush-mounting For high bay application IP65 (facia/lens part) The cable length is around 65cm.
E. HIR11/C
PIR sensor head Screw to the luminaire by conduit For high bay application IP65 (facia/lens part) The cable length is around 65cm.
F. HIR12
PIR sensor head For high bay application IP65 (facia/lens part) The cable length is around 65cm.
H. SAM20
HF sensor head Photocell AdvanceTM The cable length is around 30cm.
I. SAM21
HF sensor head IP65 The cable length is around 65cm.
J. SAM22
HF sensor head Flush mount The cable length is around 65cm.
K. SAM23
HF sensor head Photocell advance For high bay application The cable length is around 30cm
Optional Accessory: Reinforced Bluetooth Antenna
For some special applications, customers may need a larger Bluetooth transmission for both smartphones to device and device to device. Thanks to the reinforced Bluetooth antenna, with it being added to the control base HC038V/BT & HCD038/BTthe transmission distance (smartphone to device) enlarges to 20m, the distance of the device to device is around 50m. 
Detection Pattern
Dimming Interface Operation Notes
Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches. Detailed Push switch configurations can be set on the Koolmesh app.
| Switch Function | Action | Descriptions |
| Push switch | Short press (<1 second) * Short press has to be longer than 0.1s, or it will be invalid. | – Turn on/off – Recall a scene – Turn on only – Exit manual mode – Turn off only – Do nothing |
| Double push | – Turn on only – Exit manual mode – Turn off only – Do nothing – Recall a scene | |
| Long press (≥1 second) | – Dimming – Colour tuning – Do nothing | |
| Simulate sensor | / | – Upgrade a normal on/off the motion sensor to a Bluetooth controlled motion sensor |
Additional Information / Documents
- For full explanation of Hytronik Photocell AdvanceTM technology, please kindly refer to
www.hytronik.com/download->knowledge->Introduction of Photocell Advance - To learn more about detailed product features/functions, please refer to
www.hytronik.com/download->knowledge->Introduction of App Scenes and Product Functions - Regarding precautions for Bluetooth product installation and operation, please kindly refer to
www.hytronik.com/download->knowledge->Bluetooth Products-Precautions for Product Installation and Operation - Regarding precautions for microwave sensor installation and operation, please kindly refer to
www.hytronik.com/download->knowledge->Microwave Sensors – Precautions for Product Installation and Operation - Regarding precautions for PIR Sensors installation and operation, please kindly refer to
www.hytronik.com/download->knowledge->PIR Sensors – Precautions for Product Installation and Operation - Datasheet is subject to change without notice. Please always refer to the most recent release on
www.hytronik.com/products/bluetooth technology ->Bluetooth Sensors - Regarding Hytronik standard guarantee policy, please refer to
www.hytronik.com/download->knowledge->Hytronik Standard Guarantee Policy
Subject to change without notice
.Edition: 26 Feb. 2020 Ver. A0 Page 7/7
Documents / Resources
 | HYTRONIK HC038V/BT Detached Motion Sensor with Bluetooth 5.0 SIG Mesh [pdf] Instruction Manual Detached Motion Sensor with Bluetooth 5.0 SIG Mesh, HC038V BT, Detached Motion Sensor with Bluetooth 5.0 SIG Mesh, HC038V BT Detached Motion Sensor with Bluetooth 5.0 SIG Mesh, HCD038 BT |
 | HYTRONIK HC038V/BT Detached Motion Sensor with Bluetooth 5.0 SIG Mesh [pdf] Owner's Manual HC038V-BT, HCD038-BT, HC038V BT, HCD038 BT, Detached Motion Sensor with Bluetooth 5.0 SIG Mesh, HC038V BT Detached Motion Sensor with Bluetooth 5.0 SIG Mesh, HC038V BT Detached Motion Sensor, Detached Motion Sensor, Motion Sensor, Sensor |
