HBEM8200D/F is a DALI/Bluetooth convertor, which converts a standard DALI/DALI2 emergency driver output to Bluetooth output, so that user can view, edit and manage the emergency system though high-end Koolmesh platform. User can then enjoy all the powerful and convenient features in Koolmesh platform, such as scheduling a monthly self test or annually self test in the app, checking the DALI/DALI2 emergency drivers’ status, including automatic email notication upon detecting fault, automatic monthly/yearly (functional/duration test) emergency report generation etc. All the settings and parameters can be set in both Koolmesh app and Koolmesh IOT platform.

App Features

	Floorplan feature to simplify project planning
	Grouping luminaires via mesh network
	Scenes
	Push switch con‑guration
	Schedule to run scenes based on time and date
	Astro timer (sunrise and sunset)
	Device ‑rmware update over-the-air (OTA)
	Power-on status (memory against power loss)
	Of­ine commissioning
	Different permission levels via authority management
	Network sharing via QR code or keycode
	Remote control via gateway support HBGW01
	Interoperability with Hytronik Bluetooth product portfolio
	Compatible with EnOcean BLE switches
	Continuous development in progress…

Hardware Features

	l00mA DALI broadcast output for up to 50 LED drivers
	Compact design
	2 Push inputs for flexible manual control
	Short-circuit protection
	Overload protection
	5-year warranty

Fully support EnOcean self-powered switch module PTM2 l 5B (HBES0 1 /W & HBES0 1 /B)

5.0 SIG mesh
Smartphone app for both iOS & Android platform
Koolmesh Pro app for iPad
Web opp/platform: www.iot.koolmesh.com

Note:

Point to Point Control: l pc HBEM8200D/F convertor for l pc 3rd party DALI/DALl2 emergency driver.
Remote Control and Monitoring: with Bluetooth gateway HBGWOl, users can remotely control and monitor emergency system via Koolmesh mobile/tablet opp & web opp platform.
HBEM8200D/F & 3rd Party standard DALI/DALl2 emergency driver does not need to connect to central DALI PSU.
HBEM8200D/F provides power supply to the 3rd party standard DALI/DALl2 emergency driver.

Technical Specifications

Bluetooth Transceiver
Operation frequency	2.4 GHz 2.483 GHz
Transmission power	4 dBm
Range (Typical indoor)	l0~30m
Protocol	” 5.0 SIG Mesh

Mechanical Structure & Dimensions

Wire Preparation

To make or release the wire from the termin al, use a screwd river to push down the button.

1. 1. 200 metres (total) max. for 1 mm’ CSA (Ta= 50°C)
   2. 300 metres (total) max. for 1.5mm’ CSA (Ta= 50°C)

Wiring Diagram

Normal Mode
It is the mode in which mains supply is available, with the battery charged or charging. In this mooe, HBEM8200D/F is a standard Bluetooth dimmer with DALI broadcasting function, also with ability to create scenes and controllable by motion sensor, Push switch, schedules and opp.
Emergency Mode
It is the mode in which mains supply hos foiled and whilst the control gear is pcwered by the battery until deep discharge point. In this mode,
HBEM8200D/F is unable to be controlled by motion sensor, Push switch, schedules and opp. However, some emergency parameters con still be conjured via the opp. such as time scheduled for self-test, duration for extended emergency mode etc.
Rest Mode
It’s the mode in which the luminoires ore intentionally off whilst the control gear is powered by the battery. To enter this mooe, the prerequisite is that there is no mains supply. In this mode, the luminoires will be turned off automatically and HBEM8200D/F is powered by the battery. If the luminoires ore forced to turn on in this mode, HBEM8200D/F will then be adjusted to emergency mode. When mains supply is recovered, HBEM8200D/F will return to normal mode.
Inhibit Mode
It is the mode in which HBEM8200D/F is powered from mains but prevented from going into emergency mode in the event mains failure. Please enter this mode only in special applications whereby emergency functions is not needed, such as when electricians need to cut off power supply when doing examinations and maintenance work of HBEM8200D/F.
Extended Emergency Mode
It is the mode in which the control gear continues to operate the luminoires in the some way as in emergency mode for the programmed prolong time ofter the restorations of the mains supply. When this mooe is enabled, HBEM8200D/F will remain in emergency mode even when mains supply is recovered. In this mooe, the user must set the time extended for emergency mode; when the time extended elapses, HBEM8200D/F will return to normal mooe.
Self test (Monthly)
HBEM8200D/F carries out routine test on emergency lighting based on pre-programmed time via the opp & web opp ploform or ofter receiving manual commands from the opp & web opp platform. During the self test process, tests for load connections (such as open circuit, short-circuit) and battery connections (such as open circuit, short-circuit, polarity reversal etc.) will be carried out.
All the DALI emergency drivers Self Test feedbacks. results and related Events (Such as the open circuit and short circuit of the load connection, open circuit and short circuit for battery connection) ore generated by the driver itself. the HBEM8200D/F convertor will only retrieve the data from the emergency driver and translate the DALI feedback into Bluetooth Mesh data correctly and accurately and display to the end user interface (App and Web opp Platform). It will not contain any Emergency Self Test circuit in the products itself.
Self test (Annually)
The test is carried out mainly to check the battery level. The user must make sure that the battery for DALI emergency driver is fully charged before HBEM8200D/F carries out annual test. Also, the battery lifetime statistics will be analysed and displayed on a chart basis.

Push switch function
Users con connect Push switch to HBEM8200D/F to achieve multiple functions such as manually trigger monthly self test, annually self test, invalid and back to normal mode. Those options con be selected in Koolmesh opp Push switch settings.

Dimming Interface Operation Notes

Switch-Dim

The provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching [momentary) wall switches. Detailed Push switch configurations con be set on Kool mesh opp.

Additional Information / Documents

1. 1. To learn more about detailed product features/functions, please refer to www.hytronik.com/download->knowledge ->Introduction of App Scenes and Product Functions
   2. Regarding precautions for Bluetooth product installation and operation, please kindly refer to wwwhytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation

1. 1. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology->DALl-to Bluetooth Converter/Translator Module
   2. Regarding Hytronik standard guarantee policy, please refer to wwwhytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy

Documents / Resources

HYTRONIK HBEM8200D/F Built mIn DALI to Bluetooth Converter Translator Module [pdf] User Manual HBEM8200D F Built mIn DALI to Bluetooth Converter Translator Module, HBEM8200D F, Built mIn DALI to Bluetooth Converter Translator ModuleBluetooth Converter Translator Module, Converter Translator Module, Translator Module

References

• User Manual