HYPERX Alloy Origins 65 Keyboard User Guide
- A USB-C port
- B Adjustable keyboard feet
- C USB-C to USB-A cable
Press “FN” and a function key at the same time to activate its secondary feature as indicated on the keycap side-print.
|FUNCTION KEYS||SECONDARY FEATURE|
|Switch between the profiles saved to the onboard memory.|
|Play/pause , skip backwards or skip forward while listening to music or watching videos.|
|Mute , decrease , or increase computer audio.|
|Enable Game Mode to disable the Windows key and prevent accidental interruption during gaming. The Windows key will illuminate when Game Mode is enabled.|
|Increase or decrease the LED backlight brightness. There are 5 levels of brightness.|
HyperX NGENUITY Software
To customize lighting, Game Mode, and macro settings, download the HyperX NGENUITY software at: hyperxgaming.com/ngenuity
Questions or Setup Issues?
Contact the HyperX support team at:
FCC Compliance and Advisory Statement
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, according to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try correct the interference
by one or more of the following measures:
- Reorient the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into and outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any special accessories needed for compliance must be specied in the instruction manual.
Warning: A shielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment.
CAUTION: Any changes or modications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
India RoHS Statement
This product, as well as its related consumables and spares, complies with the reduction in hazardous substances provisions of the “India E-waste Rule 2016.” It does not contain lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except where allowed pursuant to the exemptions set in Schedule 2 of the Rule.
©Copyright 2021 HP Development Company, L.P. All rights reserved. All registered trademarks are property of their respective owners. The information contained herein is subject to change without notice.
Documents / Resources
|HYPERX Alloy Origins 65 Keyboard [pdf] User Guide|
Alloy Origins 65, Origins 65 Keyboard