Օգտագործողի ձեռնարկ Q&AՊատասխանել
18 թվականի օգոստոսի 2025 - 09:29
Ժամաչափը տեղադրելու համար Հանթեր 73027 Plug-in Heater with Remote Control, follow these steps:
1. Ensure the heater is plugged into a 120-volt AC outlet.
2. Press the Power Button to turn the heater ON.
3. Press the Timer Button on the remote control to activate the timer function.
4. Each press of the Timer Button increases the running time by 1 hour, up to a maximum of 12 hours.
5. If you want the heater to run continuously, press the Timer Button once more after reaching 12 hours.
6. The heater will automatically turn off when the set time has elapsed.
7. To cancel the timer function and run the heater continuously, press the Timer Button until it shows 0 hours.
Remember, always refer to the owner's manual for detailed instructions and safety precautions when using your Հանթեր 73027 Plug-in Heater with Remote Control.
Ավելացնել նոր մեկնաբանություն