Օգտագործողի ձեռնարկ Q&AՊատասխանել
10 թվականի օգոստոսի 2025 - 11:17
Ծրագրավորելու համար FuseBox TD1 Time Switch for different ON and OFF times on specific days of the week, follow these steps:
1. Press and hold the "RESET" button for 3 seconds to initiate programming functions.
2. Set the DAY and TIME:
- Press and hold the "¹" button for 5 seconds to switch between 24H and 12H modes.
- Use the "D+", "H+", and "M+" buttons to set the day, hour, and minute.
3. Select the function required: PROGRAMMING, PULSE, or COUNTDOWN.
4. For programming:
- Press the "PROGRAM" button.
- Set the ON time for memory location 1 by pressing "H+" or "M+" and then select the desired day option by pressing "D+".
- Set the OFF time for memory location 1 in the same way.
- Repeat steps 2-6 for memory locations 2-16.
- Press "¹" to end programming.
5. Վերագտնելview programmed time settings, press the "PROGRAM" button.
6. For the programmed times to operate automatically, set the timer to "AUTO OFF" (ON LED is not illuminated).
7. For manual override, press the "MANUAL" button to switch between ON, ON AUTO, OFF, and AUTO OFF programmed times.
By following these steps, you can program the FuseBox TD1 Time Switch for different ON and OFF times on specific days of the week as needed.
Ավելացնել նոր մեկնաբանություն