K2 Portable Locator Device
“
Product Information
Specifications:
- Compliance: FCC Part 15
- Radiation Exposure Limits: FCC approved for uncontrolled
environment - Minimum Distance: 0cm between radiator and body during
operation
Product Usage Instructions
Installation:
- Place the device on a stable surface.
- Ensure there is no obstruction around the device to allow
proper ventilation. - Connect the device to a power source following the provided
instructions.
Operation:
- Turn on the device using the power button.
- Follow the on-screen instructions or refer to the user manual
for specific functions. - Adjust settings as needed for optimal performance.
Maintenance:
- Regularly clean the device with a soft, dry cloth to prevent
dust buildup. - Avoid exposing the device to liquids or extreme
temperatures. - Keep the device away from direct sunlight to prevent
damage.
Frequently Asked Questions (FAQ)
Q: Can I modify the device without voiding the warranty?
A: Any changes or modifications not approved by the manufacturer
can void your warranty and authority to operate the equipment.
Q: What should I do if the device causes interference?
A: Ensure the device is not causing harmful interference and
accept any received interference. Contact customer support if
issues persist.
Q: How far should I keep the device from my body during
operation?
A: The device should be operated with a minimum distance of 0cm
between the radiator and your body to comply with FCC
guidelines.
“`
FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
Documents / Resources
 | Huthur K2 Portable Locator Device [pdf] User Manual 2BGM6K2, 2BGM6K2, k2, Magicard Pro, K2 Portable Locator Device, K2, Portable Locator Device, Locator Device, Device |