Call Settings – Huawei Mate 10

Call Settings

Enabling call forwarding
If you are unavailable to take a call, you can configure your device to forward calls to another number.

1.  Open Dialer Dialer.

2.  Touch  active tool> Settings.

3.  Touch Call forwarding. If your device has dual SIM support, touch SIM 1 or SIM 2, and then touch Call forwarding.

4.  Select a method of forwarding the call. Enter the destination number and touch Enable.

When call forwarding is enabled, your device will forward certain calls (such as unanswered calls) to the number you specified.

Enabling call waiting

Call waiting allows you to take an incoming call when you are already in a call and switch between the two conversations.

IfYou may need to contact your carrier to enable this feature.

1.  Open Dialer Dialer.

2 Touch  active tool> Settings.

3 Touch Additional settings and switch on Call waiting. If your device has dual SIM support, touch SIM 1 or SIM 2, then Additional settings, and switch on Call waiting.

When you receive an incoming call while already in a call, touch to answer the new call, and to switch between the two calls.

Enabling pocket mode
Enable pocket mode to make sure you don’t miss calls when your device is in your pocket. The ringtone volume will gradually increase when you receive a call.

1.  Open Dialer Dialer.

2 Touch active tool > Settings.

3. Switch on Pocket mode.

Switch on Pocket mode

 

When pocket mode is enabled, the ringtone volume will gradually increase when you receive a call and your device is in your pocket or bag.

Rejecting calls with a text message
Send a predefined text message when you’re not available to take a call.

1. Open Dialer Dialer.

2. Touch active tool > Settings > Reject calls with SMS.

3. Touch a predefined text message to edit the message content. Once you have finished, touch OK to save the message.

When you are unavailable to take an incoming call, touch Tuch Calland select a predefined message to send to the caller.

Configuring the harassment filter
The harassment filter automatically blocks calls and messages from unknown or blacklisted numbers.

1. Open Dialer Dialer.

2. Touch  active tool > Blocked.

3. Touch  harassment filter settings to configure the harassment filter settings and the blacklist.

IfYou can also configure the harassment filter settings and the blacklist in Phone Manager > Blocked >  harassment filter settings.

Configuring the call ringtone
Choose from a selection of system ringtones or pick a song from your music library.

IfFeatures may vary depending on your carrier.

1. Open Dialer Dialer.

2. Go to > Settings > Phone ringtone. Choose a system ringtone or select a song from your music library.

IfAlternatively, go to Settings > Sound, touch Call ringtone & vibration, and then configure the ringtone settings.

 

Questions about your Huawei Mate 10? Post in the comments!
Huawei Mate 10 Manual [PDF]

Leave a comment

Your email address will not be published. Required fields are marked *