EML (Environmental Measurements Limited) is a UK-based specialist in precision meteorological instruments, manufacturing scientific-standard aerodynamic rain gauges and weather monitoring equipment.
Environmental Measurements Limited (EML) is a leading manufacturer of high-quality meteorological instrumentation, established in the United Kingdom. With over 30 years of industry experience, EML helps hydrologists, meteorologists, and researchers capture accurate climate data through robust and scientifically designed equipment.
The company is best known for its range of aerodynamic rain gauges, such as the ARG and SBS series, which are engineered to minimize wind-induced errors and ensure precise precipitation measurement. EML products serve a wide variety of applications, including flood warning systems, water utility management, and industrial environmental compliance. Their instruments are designed to withstand harsh weather conditions while providing reliable, repeatable data.
Legújabb kézikönyvek innen: manuals+ ehhez a márkához összeállítva.
Nézze meg a márka beállítási, telepítési és hibaelhárítási videóit.
Gyakori kérdések a márka kézikönyveivel, regisztrációjával és támogatásával kapcsolatban.
The rain gauge features a small circular spirit level on the base. Loosen the locking nuts on the three adjustable feet, adjust them until the bubble is centered in the spirit level, and then retighten the locking nuts to secure the position.
EML recommends re-calibration every 12 to 24 months depending on the application and environmental conditions. Calibration involves ensuring the tipping bucket mechanism triggers at the correct volume of water.
Regularly inspect the funnel and filter gauze for debris such as leaves or dirt that may block water flow. Clean the filter by removing the end cap and rinsing the mesh. Also, verify that the gauge remains level during site visits.
The ideal site is on level ground with a uniform scattering of objects in the surrounding area to reduce wind speed without causing turbulence directly near the gauge. Avoid placing it too close to large obstructions like buildings or trees; the distance to the nearest object should be at least twice the height of that object.